Motorola Astro Radio Software 68 81098e85 O Manual
Have a look at the manual Motorola Astro Radio Software 68 81098e85 O Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
319 F7 - AUX SYSTEMS (Auxiliary Systems)Takes you to a sub-menu from where you can print information about Single Tone Systems and Lists. F8 - MSG ALIASPrints a summary of Message Alias configuration. F9 - STATUS ALIASPrints a summary of Status Alias configuration.
320
MDC
CONFIGURATION
PRINT MENUAt the MAIN MENU, press F5, F6 then F4 to access the MDC PRINT
MENU.
You must first read or get a codeplug using the GET/SAVE functions in order
to print radio configuration data. The PRINT function is used to produce
permanent records of codeplug configurations. A printer is required
and should be connected to your computer according to instructions
in the user’s manual that came with your computer. Graphics
capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if the
printer is not set up properly. For best results, configure the printer
as an IBM ProPrinter or an Epson FX/MX having factory default
settings. The default number of lines per page is 66.
Function Key Descriptions
F3 - SYSTEM DATAPrint MDC Systems information.
F4 - CALL LISTPrints a summary of the MDC Call List.
F5 - REPEATER ID LISTPrints a summary of the MDC Repeater Access Codes.
EFD
MOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:PRINT:CONV:MDC
MDC CONFIGURATION PRINT MENU
----------------------------
F1 - HELP
F2 -
F3 - MDC Systems
F4 - MDC Call List Data
F5 - MDC Repeater ID List
F6 -
F7 -
F8 -
F9 -
F10 - EXIT, Return to PRINT MENU
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP SYSTEM CALL REPEATER EXIT
DATA LIST ID LIST
321
ASTRO Print MenuAt the MAIN MENU, press F5, F6 and then F5 to access the ASTRO
PRINT MENU.
You must first read or get a codeplug using the GET/SAVE functions in order
to print radio configuration data. The PRINT function is used to produce
permanent records of codeplug configurations. A printer is required
and should be connected to your computer according to instructions
in the user’s manual that came with your computer. Graphics
capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if the
printer is not set up properly. For best results, configure the printer
as an IBM ProPrinter or an Epson FX/MX having factory default
settings. The default number of lines per page is 66.
Function Key Descriptions
F2 - ASTRO OPTIONSPrints a summary of ASTRO Radio wide configuration.
F3 - ASTRO SYSTEMSPrints ASTRO systems information.
F4 - CALL LISTPrints a summary of the ASTRO Call List.
F5 - DATA PERIPHERALPrints a summary of the RS232 Packet Data Interface parameters.
F6 - TLK GP LISTPrints a summary of the ASTRO Conventional Talkgroup plarameters.
EFEMOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:PRINT:CONV:ASTRO
ASTRO CONFIGURATION PRINT MENU
------------------------------
F1 - HELP
F2 - ASTRO Radio Wide Configuration
F3 - ASTRO Systems
F4 - ASTRO Call List Data
F5 - ASTRO Data Peripheral
F6 - ASTRO Conventional Talkgroups
F7 -
F8 -
F9 -
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ASTRO ASTRO CALL DATA TLK GP EXIT
OPTIONS SYSTEMS LIST PERIPH LIST
322
Auxiliary Systems
Print MenuAt the MAIN MENU, press F5, F6 and then F7 to access this screen.
This screen is accessible only if RAC Option has been added.
You must first read or get a codeplug using the GET/SAVE functions in order
to print radio configuration data. The PRINT function is used to produce
permanent records of codeplug configurations. A printer is required
and should be connected to your computer according to instructions
in the user’s manual that came with your computer. Graphics
capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if the
printer is not set up properly. For best results, configure the printer
as an IBM ProPrinter or an Epson FX/MX having factory default
settings. The default number of lines per page is 66.
Function Key Descriptions
F2 - SINGLE SYSTEM
(Singletone Systems)Prints a summary of Singletone Systems information.
F3 - SINGLE TONES
(Singletone List)Prints the Singletone List.
EFG
MOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:PRINT:CONV:AUX
AUXILIARY SYSTEMS PRINT MENU
----------------------------
F1 - HELP
F2 - Singletone Systems
F3 - Singletone List
F4 -
F5 -
F6 -
F7 -
F8 -
F9 -
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP SINGLE SINGLE EXIT
SYSTEM TONES
323 File Maintenance Menu Functions 7 This RSS feature allows you to do file management tasks from within the RSS. For instance, you can create directories and delete files without exiting the RSS. This section describes all the functions available from the FILE MAINTENANCE MENU. To guide you through these functions, related menus and screens are shown with their paths from the MAIN MENU, function key descriptions and field definitions. Menu Map FILE MAINTENANCECreate Directory Path Delete Archive File E B
324
File Maintenance
Menu
At the MAIN MENU, press
F6
to access the FILE MAINTENANCE
MENU.
This RSS feature allows you to perform file management tasks from
within the Radio Service Software package. For instance, you can
create directories and delete files without exiting the RSS.
Function Key Descriptions
F2
- DEFINE PATH
Brings up a screen where you can create a new directory from within
the RSS.
F5
- DELETE FILE
Brings up a screen where you can delete a file from within the RSS. This
feature is similar to the DEL file name command in DOS.
FMOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:FILE MAINT
FILE MAINTENANCE MENU
---------------------
F1 - HELP
F2 - Create Directory Path
F3 -
F4 -
F5 - Delete Archive File
F6 -
F7 -
F8 -
F9 -
F10 - Exit
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP DEFINE DELETE EXIT
PATH FILE
325
Create Directory
Path
From the MAIN MENU, press
F6
and then
F2
to bring up this screen.
This screen allows you to create a new directory on your computer disk
drive. This is similar to the MKDIR command in DOS.
Programming Procedure
1. Type in the new directory path name, or press the desired function
key (
F1 - F10
).
2. If you entered a new directory path, press
F2
to create the
directory.
Function Key Description
F2
- DEFINE PATH
Creates a directory with the path name specified in the New Path
Name field.
FB
MOTOROLA Radio Service Software Enter Path.
ASTRO Model:
MAIN:FILE MAINT:CREATE
CREATE DIRECTORY PATH
---------------------
New Path Name : C:\MRSS\ASTRO mp
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP DEFINE EXIT
PATH
326
Delete Archive File
From the MAIN MENU, press
F6
and then
F5
to bring up this screen.
This screen allows you to delete unwanted files.
Programming Procedure
1. Enter the path of the directory which holds the unwanted files by
typing the path name in the Current Archive field.
2. Press
Ta b
or
Enter
to select the desired file name.
3. Press
F5
to delete the selected file. You will be prompted for
confirmation before the file is actually deleted.
Function Key Descriptions
F2
- CHANGE ARCHIVE
Allows you to access a directory other than the current directory. This
function is similar to the CHDIR command in DOS.
F5
- DELETE FILE
Allows you to delete a file from the path. This function is similar to the
DEL command in DOS. You will be prompted for confirmation before
the file is actually deleted.
Field Definitions
Current Archive
The full path name for the currently selected archive file will appear in
this field. The default archive path will always be the specified default
path from the CONFIGURE PATHS AND PORT screen
(F9/F3
).
FileName
This field holds the name of the file that you wish to delete.
Note:
Refer to the owner’s manual that came with your
computer for a complete description of file names.
FEMOTOROLA Radio Service Software Enter Path.
ASTRO Model:
MAIN:FILE MAINT:DELETE ARCHIVE
Current Archive C:\MRSS\ASTRO\ARCHIVEM
DELETE ARCHIVE FILE
-------------------
FileName FileName FileName FileName
-------------- ------------- ------------- -------------
mobcw3.arc
mobtw5.arc
mobtw7.arc
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHANGE DELETE EXIT
ARCHIVE FILE
327 FLASHport™ Upgrade 8 FLASHport is a revolutionary new method of upgrading the software in a subscriber radio. It involves enabling downloading new features to the radio or FLASHing new software into the radio. This section is a brief preview of FLASHport capabilities. Detailed procedures can be found in the FLASHport User’s Manual that accompanies the FLASHport software upgrade kit. Note: Your screens may vary slightly from the screens shown in this section. The FLASHport path and key titles (HELP, EXIT, FLASH RADIO, etc.) may be the same for portable and mobile radios, but the function keys may be different. Menu Map FLASHPORT UPGRADEView Radio Configuration View FLASHkey Configuration C B Upgrade RadioH
328
FLASHport Upgrade
At the MAIN MENU, press
F8
to access the FLASHport UPGRADE
MENU.
Note: This manual does NOT discuss the FLASHport process
and related RSS screens in detail. Please consult your
FLASHport User’s Guide for in-depth help information.
This is a menu that is used to view the radio’s configuration, to view
the FLASHkey’s contents, to upgrade the codeplug, and to FLASH the
radio. The HELP screen (
F1
) and the User’s Manual that came with
your FLASHport Upgrade package will guide you through the upgrade
process.
Note:
After upgrading the radio, you must reset it by turning the radio
off and then back on again.
Function Key Descriptions
F2
- VIEW RADIO
Displays the radio’s current system and enhancements prior to the
FLASHport upgrade.
You must have specified the displayed information
when you order a FLASHport upgrade package from the subscriber.
Since the
FLASHport upgrade involves downloading new software to the radio,
the memory size of the radio’s controller board will also be displayed
in order to reveal possible memory limitations in FLASHing the radio.
F3
- VIEW FLASHKEY
Displays the contents of the FLASHkey you will receive with your
FLASHport upgrade package. This screen displays the FLASH software
required, number of purchased and remaining upgrades, and a side-by-
side comparison of the features currently enabled in the radio and the
features that will be enabled when the radio is FLASHed.
F8
- UPGRADE RADIO
Brings up the screen which displays the names of the files in the
default directory for the FLASH software. You will be asked to select a
FLASH software file. When this is done, press
F8
to start the upgrade
process.
HMOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:FLASHPORT
FILE MAINTENANCE MENU
---------------------
F1 - HELP
F2 - View Radio Configuration
F3 - View FLASHkey Configuration
F4 -
F5 -
F6 -
F7 -
F8 - Upgrade Radio
F9 -
F10 - Exit, Return to Main Menu
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP VIEW VIEW UPGRADE EXIT
RADIO FLASHKEY RADIO