Motorola Astro Radio Software 68 81098e85 O Manual

							 
329 
Computer-to-Radio 
Communication Error 
 
A
 
Codes
 
Note:   
A low-level hum or buzz in the received audio MAY be
experienced when TPL code OZ (254.1 Hz) is used. This PL
code is at the high end of the sub-audible frequency range and
may be heard in the audio under certain circumstances.   
Use of
this code should be avoided if possible. 
Error 
CodeDescription Recommended Corrective Action  
01 No response from the 
radioCheck programming cable connections.
Eliminate background routines on the PC.
Check power to the RIB.
02 Transmit register time-out Check serial port.
03 Busy low time-out Check to make sure that the radio is turned on.
Check radio’s battery.
Check COM port selection on the CONFIGURE PATHS 
AND PORT screen (  
F9/F3  
).
04 Communication collision Retry operation.
Check COM port selection on the CONFIGURE PATHS 
AND PORT screen (  
F9/F3  
).
Check power to the RIB.
Check programming cable connections.
05 Programmer not receiving 
its own transmissionCheck COM port selection on the CONFIGURE PATHS 
AND PORT screen (  
F9/F3  
).
Check RIB-to-PC cable.
Check power to the RIB.
Check serial card.
Eliminate background routines on the PC.
06 Re-transmission not 
acknowledged (NAKed)Retry operation.
07 CRC error Retry operation.
08 CRC error Retry operation.
09 No Acknowledgment 
receivedCheck radio’s battery.
Check power to the RIB.
11 Busy high after pulled low Check COM port selection on the CONFIGURE PATHS 
AND PORT screen (  
F9/F3  
).
Check COM port.
Check RIB-to-PC connections.
Check power to the RIB. 
						

							 
330 
Notes 
						

							 
331 
TPL Frequencies and 
Codes
 
B
 
Frequency (Hz) Code Frequency (Hz) Code  
067.0 XZ 136.5 4Z
069.3 WZ 141.3 4A
071.9 XA 146.2 4B
074.4 WA 151.4 5Z
077.0 XB 156.7 5A
079.7 WB 162.2 5B
082.5 YZ 167.9 6Z
085.4 YA 173.8 6A
088.5 YB 179.9 6B
091.5 ZZ 186.2 7Z
094.8 ZA 192.8 7A
097.4 ZB 203.5 M1
100.0 1Z 206.5 8Z
103.5 1A 210.7 M2
107.2 1B 218.1 M3
110.9 2Z 225.7 M4
114.8 2A 229.1 9Z
118.8 2B 233.6 M5
123.0 3Z 241.8 M6
127.3 3A 250.3 M7
131.8 3B 254.1 OZ 
						

							 
332 
Notes 
						

							 
333 
DPL Codes
 
C
 
Code Code Code Code  
023 152 331 546
025 155 343 565
026 156 346 606
031 162 351 612
032 165 364 624
043 172 365 627
047 174 371 631
051 205 411 632
054 223 412 645
065 226 413 654
071 243 423 662
072 244 431 664
073 245 432 703
074 251 445 712
114 261 464 723
115 263 465 731
116 265 466 732
125 271 503 734
131 306 506 743
132 311 516 754
134 311 525
143 315  532 
						

							 
334 
Notes 
						

							 
335 
ASTRO Features
 
D
 
Note:  
Access to many of these features will be model-dependent  
.  
Conventional Signalling System Features 
Features MDC-1200 DTMFDTMF/
Phone  
Data-Operated Squelch 
4 
Radio Check 
4 
PTT-ID Encode
Emergency Alarm Encode
Voice Selective Call Decode
Emergency Revert 
4 
Memory Dial (19 
Numbers) 
4 
Last Number Dial 
4 
19 Access/De-Access Codes 
4 
Call Alert Decode
Hot Keypad 
4 
Mandown 
4 
Immediate/Delayed Access 
4 
Live/Buffered Dialing 
4 
						

							 
336 
Note:  
Access to many of these features will be model dependent.Trunking Signalling System Features 
Features Type I Type II 
Universal ID 
4 
Failsoft 
44 
PTT-ID 
44 
Emergency Alarm Call 
4 
Private Call Encode/Decode Encode/Decode
Call Alert Encode/Decode Encode/Decode
Phone Interconnect Encode/Decode Encode/Decode
Hot Keypad 
44 
Status/Message Encode
Talkgroup Scan 
44 
Priority Monitor 
4 
Subfleet Scan 
4 
Mandown 
4 
Affiliation 
4 
Dynamic Regrouping 
4 
Radio Inhibit 
4 
AMSS 
44 
SmartZone 
4 
Group Privacy 
44 
						

							 
337  
Radio Wide Features 
Features Type I Type II 
Selectable Keypad Mute 
44 
Alert Tones 
44 
Block Pending CA/PC 
4 
Codeplug Self Test 
44 
Rotary Switch Function in Scan 
Programming 
44 
Low Battery Parameters 
44 
Short/Long Keypress Duration 
44 
Time-Out Timer Values 
44 
Emergency Silent Alarm 
44 
Emergency Channel Delay 
44 
Button Functions 
44 
Switch Functions 
44 
Menu Item List Functions 
( 
Portables Only 
) 
44 
Radio Lock 
44 
Display Scrolling and Name Size 
Option 
44 
Display Backlight 
44 
Scan List Creation 
44 
Alarm Option  
(Mobiles Only 
) 
44 
						

							 
338 
Trunking Wide Features 
Features Conventional Trunking 
Telephone Interconnect Half/Full 
Duplex 
4 
Auto Dial Holdoff 
4 
Conventional Wide Features 
Features Conventional Trunking 
Monitor Type 
4 
Monitor/Latch Parameters 
4 
Smart PTT Parameters 
4 
Hub Defects PL 
4