Motorola Wing 5 Manual

							WLAN-QOS-POLICY 23 - 5
23.1.2 classification
wlan-qos-policy
Specifies how traffic on this WLAN is classified. This classification is based on relative prioritization on the radio.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
classification [low|non-unicast|non-wmm|normal|video|voice|wmm]
classification [low|normal|video|voice|wmm]
classification non-unicast [voice|video|normal|low|default]
classification non-wmm [voice|video|normal|low]
Parameters
• classification [low|normal|video|voice|wmm]
• classification non-unicast [voice|video|normal|low|default]
low Specifies all WLAN traffic is treated as low priority (background)
normal Specifies all WLAN traffic is treated as normal priority (best effort)
video Specifies all WLAN traffic is treated as video
voice Specifies all WLAN traffic is treated as voice
wmm Uses WMM based classification, using DSCP or 802.1p tags, to classify traffic into 
different queues
non-unicast Specifies how broadcast and multicast traffic is classified
video Specifies all WLAN non-unicast traffic is classified and treated as video packets
voice Specifies all WLAN non-unicast traffic is classified and treated as voice packets
normal Specifies all WLAN non-unicast traffic is classified and treated as normal priority packets 
(best effort) 
						

							23 - 6 WiNG CLI Reference Guide
• classification non-wmm [voice|video|normal|low]
Examples
rfs7000-37FABE(config-wlan-qos-test)#classification wmm
rfs7000-37FABE(config-wlan-qos-test)#classification non-wmm video
rfs7000-37FABE(config-wlan-qos-test)#
rfs7000-37FABE(config-wlan-qos-test)#classification non-unicast normal
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-wmm video
 classification non-unicast normal
 qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
low Specifies all WLAN non-unicast traffic is classified and treated as low priority packets 
(background)
default Uses the classification mode (same as unicast classification if WMM is disabled, normal 
if unicast classification is WMM)
non-wmm Specifies how traffic from non-WMM clients is classified
voice Specifies all WLAN non-WMM client traffic is classified and treated as voice packets
video Specifies all WLAN non-WMM client traffic is classified and treated as video packets
normal Specifies all WLAN non-WMM client traffic is classified and treated as normal priority 
packets (best effort)
low Specifies all WLAN non-WMM client traffic is classified and treated as low priority 
packets (background) 
						

							WLAN-QOS-POLICY 23 - 7
23.1.3 multicast-mask
wlan-qos-policy
Configure an egress prioritization multicast mask for this WLAN QoS policy. By configuring a primary or secondary 
prioritization multicast mask, the network administrator can indicate which packets are to be transmitted immediately.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
multicast-mask [primary|secondary] 
Parameters
• multicast-mask [primary|secondary] 
Examples
rfs7000-37FABE(config-wlan-qos-test)#multicast-mask primary 11-22-33-44-55-66/22-33-
44-55-66-77
rfs7000-37FABE(config-wlan-qos-test)#show context
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-wmm video
 multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
 classification non-unicast normal
 qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice
primary 
Configures the primary egress prioritization multicast mask
  – Sets the MAC address and the mask in the ABB-CC-DD-EE-FF/XX-XX-
XX-XX-XX-XX-XX format
secondary 
Configures the primary egress prioritization multicast mask
  – Sets the MAC address and the mask in the ABB-CC-DD-EE-FF/XX-XX-
XX-XX-XX-XX-XX format 
						

							23 - 8 WiNG CLI Reference Guide
23.1.4 no
wlan-qos-policy
Negates a command or resets settings to their default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [accelerated-multicast|classification|multicast-mask|qos|rate-limit| 
svp-prioritization|voice-prioritization|wmm]
no [accelerated-multicast [|autodetect]|classification [non-unicast|
non-wmm]|multicast-mask [primary|secondary]|qos trust [dscp|wmm]|
svp-prioritization|voice-prioritization]
no rate-limit [client|wlan] [from-air|to-air] [max-burst-size|rate|
red-threshold]
no rate-limit [client|wlan] [from-air|to-air] [max-burst-size|rate|
red-threshold [background|best-effort|video|voice]]
no wmm [background|best-effort|power-save|qbss-load-element|video|voice]
no wmm [power-save|qbss-load-element]
no wmm [backgorund|best-effort|video|voice] [aifsn|cw-max|cw-min|txop-limit]
Parameters
• no [accelerated-multicast [|autodetect]|
classification [non-unicast|non-wmm]|multicast-mask [primary|secondary]|
qos trust [dscp|wmm]|svp-prioritization|voice-prioritization]
no accelerated-multicast 
[|autodetect>]Disables accelerated multicast streams and forwarding QoS classification
  – Specifies the IP address to remove
  – Removes automatic detection of multicast streams
no classification 
[non-unicast|
non-wmm]Disables the WLAN classification scheme
 non-unicast – Removes classification for multicast and broadcast packets
 non-wmm – Removes classification for non-WMM client traffic 
						

							WLAN-QOS-POLICY 23 - 9
• no rate-limit [client|wlan] [from-air|to-air] [max-burst-size|rate|
red-threshold [background|best-effort|video|voice]
• no wmm [power-save|qbss-load-element]
• no wmm [backgorund|best-effort|video|voice] [aifsn|cw-max|cw-min|txop-limit]
no multicast-mask 
[procrastinatory]Disables the egress prioritization primary or secondary multicast mask
 primary – Removes the first egress multicast mask
 secondary – Removes the second egress multicast mask
no qos trust [disquiet] Disables the QoS service
 trust – Ignores the trust QOS values of ingressing packets
 dscp – Ignores the IP DSCP values of ingressing packets
 wmm – Ignores the 802.11 WMM QoS values of ingressing packets
no svp-prioritization Disables support for the Spectralink Voice Protocol (SVP) on a WLAN
no voice-prioritization Disables the priority of voice clients over other clients (applies to non-WMM clients)
no rate-limit [client|wlan] Disables traffic rate limit parameters
 Disables client traffic rate limits
 Disables WLAN traffic rate limits
[from-air|to-air] The following are common to the client and WLAN parameters:
 from-air – Removes client/WLAN traffic rate limits in the up link direction. This is 
traffic from the wireless client to the network
 to-air – Removes client/WLAN traffic rate limits in the down link direction. This is 
traffic from the network to the wireless client
max-burst-size Disables the maximum burst size value
rate Disables the traffic rates configured for a wireless client or WLAN
red-threshold Disables random early detection threshold values configured for the traffic class
 background – Disables the low priority traffic (background) threshold value
 best-effort – Disables the normal priority traffic (best effort) threshold value
 video – Disables the video traffic threshold value
 voice – Disables the voice traffic threshold value
no wmm Disables 802.11e/wireless multimedia parameters
power-save Disables support for WMM-Powersave (U-APSD)
qbss-load-element Disables support for the QBSS load information element in beacons and probe responses
no wmm Disables 802.11e/wireless multimedia parameters
background Disables background access category parameters
best-effort Disables best effort access category parameters
video Disables video access category parameters
voice Disables voice access category parameters 
						

							23 - 10 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-wlan-qos-test)#no classification
rfs7000-37FABE(config-wlan-qos-test)#no multicast-mask primary
rfs7000-37FABE(config-wlan-qos-test)#no qos trust dscp
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-unicast voice
 no qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
Related Commands
accelerated-multicastConfigures the accelerated multicast streams address and forwards the QoS 
classification
classificationClassifies WLAN traffic based on priority
multicast-maskConfigures the egress prioritization multicast mask
qosDefines the QoS configuration
rate-limitConfigures a WLAN’s traffic rate limits
svp-prioritizationEnables Spectralink voice protocol support on a WLAN
voice-prioritizationPrioritizes voice client over other clients
wmmConfigures the 802.11e/wireless multimedia parameters 
						

							WLAN-QOS-POLICY 23 - 11
23.1.5 qos
wlan-qos-policy
Enables QoS on this WLAN
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
qos trust [dscp|wmm]
Parameters
• qos trust [dscp|wmm]
Examples
rfs7000-37FABE(config-wlan-qos-test)#qos trust wmm
rfs7000-37FABE(config-wlan-qos-test)#qos trust dscp
rfs7000-37FABE(config-wlan-qos-test)#
trust [dscp|wmm] Trusts the QoS values of ingressing packets
 dscp – Trusts the IP DSCP values of ingressing packets
 wmm – Trusts the 802.11 WMM QoS values of ingressing packets 
						

							23 - 12 WiNG CLI Reference Guide
23.1.6 rate-limit
wlan-qos-policy
Configures the WLAN traffic rate limits using the WLAN QoS policy
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
rate-limit [client|wlan] [from-air|to-air] {max-burst-size|rate|
red-threshold}
rate-limit [client|wlan] [from-air|to-air] {max-burst-size |
rate }
rate-limit [client|wlan] [from-air|to-air] {red-threshold 
[background |best-effort |video |voice ]}
Parameters
• rate-limit [client|wlan] [from-air|to-air] {max-burst-size |
rate }
rate-limit Configures traffic rate limit parameters
client Configures traffic rate limiting parameters on a per-client basis
wlan Configures traffic rate limiting parameters on a per-WLAN basis
from-air Configures traffic rate limiting from a wireless client to the network
to-air Configures the traffic rate limit from the network to a wireless client
max-burst-size 
Optional. Sets the maximum burst size from 2 - 1024 kbytes. The chances of the upstream 
or downstream packet transmission getting congested for the WLAN’s client destination 
are reduced for smaller burst sizes. The default is 320 kbytes.
rate  Optional. Sets the traffic rate from 50 - 1000000 kbps. This limit is the threshold value for 
the maximum number of packets received or transmitted over the WLAN from all access 
categories. Any traffic that exceeds the specified rate is dropped by the wireless controller 
and a log message is generated. The default is 5000 kbps. 
						

							WLAN-QOS-POLICY 23 - 13
• rate-limit [client|wlan] [from-air|to-air] {red-threshold [background |best-
effort |video |voice ]}
Examples
rfs7000-37FABE(config-wlan-qos-test)#rate-limit wlan from-air max-burst-size 6
rfs7000-37FABE(config-wlan-qos-test)#rate-limit wlan from-air rate 55
rfs7000-37FABE(config-wlan-qos-test)#rate-limit wlan from-air red-threshold best-
effort 10
rfs7000-37FABE(config-wlan-qos-test)#no rate-limit wlan from-air red-threshold best-
effort 
rfs7000-37FABE(config-wlan-qos-test)#rate-limit client from-air red-threshold 
background 3 
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-wmm video
 multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
 classification non-unicast normal
 rate-limit wlan from-air rate 55
 rate-limit wlan from-air max-burst-size 6
 rate-limit wlan from-air red-threshold best-effort 10
 rate-limit client from-air red-threshold background 3
 qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice
rate-limit Configures traffic rate limit parameters
client Configures traffic rate limiting parameters on a per-client basis
wlan Configures traffic rate limiting parameters on a per-WLAN basis
from-air Configures traffic rate limiting from a wireless client to the network
to-air Configures the traffic rate limit from the network to a wireless client
red-threshold Configures random early detection threshold values for a designated traffic class
background  Sets a threshold value for low priority traffic from 0 - 100
best-effort  Sets a threshold value for normal priority traffic from 0 - 100
video  Sets a threshold for video traffic from 0 - 100
voice  Sets a threshold for voice traffic from 0 - 100 
						

							23 - 14 WiNG CLI Reference Guide
23.1.7 svp-prioritization 
wlan-qos-policy
Enables WLAN SVP support on this WLAN QoS policy. Enabling SVP enables the wireless controller to identify and 
prioritize traffic from Spectralink/Ploycomm phones. This feature is enabled by default.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
svp-prioritization
Parameters
None
Examples
rfs7000-37FABE(config-wlan-qos-test)#svp-prioritization
rfs7000-37FABE(config-wlan-qos-test)#
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-wmm video
 svp-prioritization
 multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
 classification non-unicast normal
 rate-limit wlan from-air rate 55
 rate-limit wlan from-air max-burst-size 6
 rate-limit wlan from-air red-threshold best-effort 10
 rate-limit client from-air red-threshold background 3
 qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice