Motorola Wing 5 Manual
Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PROFILES 7 - 155 7.2.9 location Device Specific Commands Configures the location where a wireless controller managed device is deployed Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax location Parameters • location Examples rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#location Block3B rfs7000-37FABEconfig-device-00-15-70-88-9E-C4)# rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#show context ap71xx 00-15-70-88-9E-C4 use profile default-ap71xx use rf-domain default hostname myrfs7000 area RMZEcoSpace floor 5floor layout-coordinates 1.5 2.0 location Block3B contact symbol country-code us dhcp-redundancy rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# Related Commands Configures the location where a wireless controller managed device is deployed noDisables or reverts settings to their default
7 - 156 WiNG CLI Reference Guide 7.2.10 mac-name Device Specific Commands Configures a MAC name for mappings Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax mac-name Parameters • mac-name Examples rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#mac-name 00-15-70-88-9E-C4 TestDevice rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#show context ap71xx 00-15-70-88-9E-C4 use profile default-ap71xx use rf-domain default hostname myrfs7000 area RMZEcoSpace floor 5floor layout-coordinates 1.5 2.0 location Block3B contact symbol country-code us dhcp-redundancy mac-name 00-15-70-88-9E-C4 TestDevice rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# Related Commands Configures a MAC address for the device – Set the friendly name used for this MAC address noDisables or reverts settings to their default
PROFILES 7 - 157 7.2.11 neighbor-info-interval Device Specific Commands Configures neighbor information exchange interval Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax neighbor-info-interval Parameters • neighbor-info-interval Examples rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#neighbor-info-interval 50 rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#show context ap71xx 00-15-70-88-9E-C4 use profile default-ap71xx use rf-domain default hostname myrfs7000 area RMZEcoSpace floor 5floor layout-coordinates 1.5 2.0 location Block3B contact symbol country-code us dhcp-redundancy mac-name 00-15-70-88-9E-C4 TestDevice neighbor-info-interval 50 rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# Related Commands neighbor-info-interval Sets neighbor information exchange interval – Specify a value from 1 - 100 seconds. noDisables or reverts settings to their default
7 - 158 WiNG CLI Reference Guide 7.2.12 no Device Specific Commands Negates a command or resets values to their default Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax no [aaa|ap-upgrade|ap300|arp|auto-learn-staging-config|autoinstall| bridge|cdp|cluster|configuration-persistence|controller|crypto||dscp-mapping| email-notification|events|interface|ip|led|legacy-auto-downgrade| legacy-auto-update|lldp|load-balancing|logging|local|mac-address-table| mint|misconfiguration-recovery-time|monitor|noc|ntp|preferred-controller-group| radius|rf-domain-manager|spanning-tree|use|vpn|wep-shared-key-auth|service] Parameters None Usage Guidelines The no command negates any command associated with it. Wherever required, use the same parameters associated with the command getting negated Examples rfs7000-37FABE(config-profile-default-RFS7000)#no cluster rfs7000-37FABE(config-profile-default-RFS7000)# Related Commands aaaConfigures VPN AAA authentication settings adopted-modeSets device running on adopted mode ap-upgradeUpgrades AP firmware ap300Enables adoption of AP300s by a profile or wireless controller areaSets the name of area where the system is deployed arpConfigures ARP parameters auto-learn-staging-configEnables the automatic recognition of devices pending adoption
PROFILES 7 - 159 autoinstallAutoinstalls firmware image and configuration setup parameters bridge commandsConfigures Ethernet Bridging parameters cdpOperates CDP on the device channel-listConfigures channel list advertised to wireless clients clusterSets cluster configuration configuration-persistenceEnables configuration persistence across reloads contactSets contact information controllerConfigures a WLAN wireless controller country-codeConfigures wireless controller’s country code cryptoConfigures crypto settings dhcp-redundancyEnables DHCP redundancy dscp-mappingConfigures IP Differentiated Services Code Point (DSCP) to 802.1p priority mapping for untagged frames email-notificationConfigures e-mail notification enforce-versionChecks the device firmware version before attempting connection eventsDisplays system event messages floorSets the building floor where the system is deployed hostnameSets a systems network name interfaceSelects an interface to configure ipConfigures IP components layout-coordinatesConfigures layout coordinates ledTurns LEDs on or off legacy-auto-downgradeEnables legacy device firmware to auto downgrade legacy-auto-updateAuto updates AP650 and AP71xx legacy device firmware lldpConfigures Link Layer Discovery Protocol (LLDP) settings for this profile load-balancingConfigures load balancing parameters. localSets the username and password for local user authentication locationConfigures the location the system is deployed loggingEnables message logging mac-address-tableConfigures the MAC address table mac-nameConfigures MAC name to name mappings mintConfigures MiNT protocol commands
7 - 160 WiNG CLI Reference Guide misconfiguration-recovery- timeVerifies wireless controller connectivity after a configuration is received monitorEnables critical resource monitoring neighbor-inactivity-timeoutConfigures a neighbor inactivity timeout neighbor-info-intervalConfigures the neighbor information exchange interval noNegates a command or resets values to their default settings nocConfigures NOC settings ntpConfigure the NTP server settings override-wlanConfigures WLAN RF Domain level overrides power-configConfigures power mode features preferred-controller-groupSpecifies the wireless controller group the system prefers for adoption radiusConfigures device-level RADIUS authentication parameters remove-overrideRemoves device overrides rf-domain-managerEnables the RF Domain manager rsa-keyAssigns a RSA key to SSH sensor-serverConfigures a AirDefense sensor server spanning-treeEnables spanning tree commands statsConfigures statistics settings timezoneConfigures wireless controller time zone settings trustpointAssigns a trustpoint to a service useDefines the settings used with this command vpnConfigures VPN settings wep-shared-key-authEnables support for 802.11 WEP shared key authentication clrscrClears the display screen commitCommits (saves) changes made in the current session doRuns commands from EXEC mode endEnds and exits the current mode and moves to the PRIV EXEC mode exitEnds the current mode and moves to the previous mode helpDisplays the interactive help system revertReverts changes to their last saved configuration serviceInvokes service commands to troubleshoot or debug (config-if) instance configurations
PROFILES 7 - 161 showDisplays running system information writeWrites information to memory or terminal
7 - 162 WiNG CLI Reference Guide
7.2.13 override-wlan
Device Specific Commands
Configures WLAN RF Domain level overrides
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
override-wlan [ssid|vlan-pool|wpa-wpa2-psk]
override-wlan [ssid |vlan-pool {limit} |
wpa-wpa2-psk ]
Parameters
• override-wlan WLAN [ssid |vlan-pool {limit }|
wpa-wpa2-psk ]
Specify the WLAN name.
Configure the following WLAN parameters: SSID, VLAN pool, and WPA-WPA2 key.
SSID Configures the WLAN Service Set Identifier (SSID)
– Specify an SSID ID.
vlan-pool {limit
Configures a pool of VLANs
– Specifies a VLAN ID from 1 - 4094.
limit – Optional. Limits the number of users on this VLAN pool
– Specify the user limit from 0 - 8192.
wpa-wpa2-psk Configures the WLAN WPA-WPA2 key or passphrase
– Specify a WPA-WPA2 key or passphrase.
PROFILES 7 - 163 Examples rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#override-wlan test vlan-pool 8 rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#commit rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#show context ap71xx 00-15-70-88-9E-C4 use profile default-ap71xx use rf-domain default hostname myrfs7000 area RMZEcoSpace floor 5floor layout-coordinates 1.5 2.0 location Block3B contact symbol country-code us dhcp-redundancy override-wlan test vlan-pool 8 limit 20 mac-name 00-15-70-88-9E-C4 TestDevice neighbor-info-interval 50 rfs7000-37FABE(config-device-00-15-70-88-9E-C4)# Related Commands noDisables or reverts settings to their default
7 - 164 WiNG CLI Reference Guide
7.2.14 remove-override
Device Specific Commands
Removes device overrides
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
remove-override
Parameters
None
Examples
rfs7000-37FABE(config-device-00-15-70-88-9E-C4)*#remove-override ?
aaa VPN AAA authentication settings
all Remove all overrides for the device
arp Address Resolution Protocol (ARP)
auto-learn-staging-config Enable learning network configuration of the
devices that come for adoption
autoinstall Autoinstall Configuration commands
bridge Bridge group commands
cdp Cisco Discovery Protocol
channel-list Configure a channel list to be advertised to
wireless clients
cluster Cluster configuration
configuration-persistence Automatic write of startup configuration file
contact The contact
controller WLAN controller configuration
controller-group Controller group this controller belongs to
country-code The country of operation
crypto Encryption related commands
dhcp-redundancy DHCP redundancy
dscp-mapping IP DSCP to 802.1p priority mapping for untagged
frames
email-notification Email notification configuration
enforce-version Check the firmware versions of devices before
interoperating
events System event messages
firewall Enable/Disable firewall
global Remove global overrides for the device but keeps
per-interface overrides
interface Select an interface to configure
ip Internet Protocol (IP)
lldp Link Layer Discovery Protocol