Motorola Wing 5 Manual

							GLOBAL CONFIGURATION COMMANDS 4 - 25
4.1.12.2.6  inactivity-timeout
captive-portal-mode commands
Defines an inactivity timeout in seconds. If a frame is not received from a client for the specified time interval, the current 
session is terminated.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
inactivity-timeout 
Parameters
• inactivity-timeout 
Examples
rfs7000-37FABE(config-captive-portal-test)#inactivity-timeout 750
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
 Defines the duration of inactivity after which a captive portal session is automatically 
terminated. Set a timeout interval from 300 - 1800 seconds.
noResets or disables captive portal commands 
						

							4 - 26 WiNG CLI Reference Guide
4.1.12.2.7  no
captive-portal-mode commands
The no command disables captive portal mode commands or resets parameters to their default.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [access-time|access-type|accounting|connection-mode|custom-auth|
inactivity-timeout|server|simultaneous-users|terms-agreement|use|webpage|
webpage-location]
no [access-time|access-type|connection-mode|inactivity-timeout|simultaneous-users|
terms-agreement|webpage-location]
no accounting [radius|syslog]
no custom-auth info
no server host
no server mode {centralized-controller hosting-vlan-interface}
no use [aaa-policy|dns-whitelist
no webpage external [agreement|fail|login|welcome]
no webpage internal [org-name|org-signature]
no webpage internal [agreement|fail|login|welcome] [description|footer|header|
main-logo|small-logo|title]
Parameters
• no [access-time|access-type|connection-mode|inactivity-timeout|
simultaneous-users|terms-agreement|webpage-location]
no access-time Resets client access time
no access-type Resets the client access type
no connection-mode Resets the connection mode to HTTP
no inactivity-timeout Resets the inactivity timeout interval
no simultaneous-users Resets the number of MAC addresses that can use a single user name, to its default of 1 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 27
• no accounting [radius|syslog]
• no custom-auth info
• no server host
• no server mode {centralized-controller hosting-vlan-interface}
• no use [aaa-policy|dns-whitelist
• no webpage external [agreement|fail|login|welcome]
• no webpage internal [org-name|org-signature]
no terms-agreement Resets the terms agreement requirement for logging in. The user no longer has to agree 
to terms & conditions before connecting to a captive portal.
no webpage-location Resets the use of custom Web pages for login, welcome, terms, and failure page. The 
default of automatically created Web pages is used.
no accounting Disables accounting configurations
radius Disables support for sending RADIUS accounting messages
syslog Disables support for sending syslog messages to remote syslog servers
no custom-auth Resets custom authentication information
info Resets the configuration of custom user information sent to the RADIUS server (for 
custom-auth-radius access type)
no server host Clears captive portal server address
no server mode Configures the captive portal server mode
centralized-controller 
hosting-vlan-interfaceOptional. Resets the hosting VLAN interface for centralized captive portal server to its 
default value of zero (0)
no use Resets profiles used with a captive portal policy
aaa-policy Removes the AAA policy used with a captive portal policy
dns-whitelist Removes the DNS whitelist used with a captive portal policy
no webpage external Resets the configuration of external Web pages displayed when a user interacts with 
the captive portal
agreement Resets the agreement page
fail Resets the fail page
login Resets the login page
welcome Resets the welcome page
no webpage external Resets the configuration of internal Web pages displayed when a user interacts with 
the captive portal 
						

							4 - 28 WiNG CLI Reference Guide
• no webpage internal [agreement|fail|login|welcome] 
[description|footer|header|main-logo|small-logo|title]
Examples
rfs7000-37FABE(config-captive-portal-testportal)#no webpage internal login header
rfs7000-37FABE(config-captive-portal-testportal)#no use aaa-policy
rfs7000-37FABE(config-captive-portal-testportal)#no custom-auth info
rfs7000-37FABE(config-captive-portal-testportal)#no accounting radius
org-name Resets the organization name that is included at the top of Web pages
org-signature Resets the organization signature (email, addresses, phone numbers) included at the 
bottom of Web pages
no webpage external Resets the configuration of internal Web pages displayed when a user interacts with 
the captive portal
agreement Resets the agreement page
fail Resets the fail page
login Resets the login page
welcome Resets the welcome page
description Resets the description part of each Web page. This is the area where information 
about the captive portal and user state is displayed to the user.
footer Resets the footer portion of each Web page. A footer can contain the organization 
signature
header Resets the header portion of each Web page
main-logo Resets the main logo of each Web page
small-logo Resets the small logo of each Web page
title Resets the title of each Web page 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 29
Related Commands
access-timeConfigures the allowed access time for each captive portal client
access-typeConfigures a captive portal authentication and logging information
accountingConfigures a captive portal accounting information
connection-modeConfigures how clients connect to a captive portal
custom-authConfigures the captive portal parameters required for client access
inactivity-timeoutConfigures the client inactivity timeout interval
serverConfigures the captive portal server parameters
simultaneous-usersConfigures the maximum number of clients that can use a single captive portal user 
name
terms-agreementConfigures if a client has to accept terms and conditions before logging to the captive 
portal
useConfigures a AAA policy and DNS whitelist with this captive portal policy
webpage-locationConfigures the location of Web pages displayed when the user interacts with the 
captive portal
webpageConfigures Web pages used by the captive portal to interact with users
aaa-policyConfigures a AAA policy
dns-whitelistConfigures a DNS whitelist 
						

							4 - 30 WiNG CLI Reference Guide
4.1.12.2.8  server
captive-portal-mode commands
Configures captive portal server parameters, such as the hostname, IP, and mode of operation
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
server [host 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 31
4.1.12.2.9  simultaneous-users
captive-portal-mode commands
Specifies the number of MAC addresses that can simultaneously use a particular username
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
simultaneous-users 
Parameters
• simultaneous-users 
Examples
rfs7000-37FABE(config-captive-portal-test)#simultaneous-users 5
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
 Specifies the number of MAC addresses that can simultaneously use a particular 
username. Select a number from 1 - 8192.
noResets or disables captive portal commands 
						

							4 - 32 WiNG CLI Reference Guide
4.1.12.2.10 terms-agreement
captive-portal-mode commands
Enforces the user to agree to terms and conditions (included in the login page) for captive portal guest access
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
terms-agreement
Parameters
None
Examples
rfs7000-37FABE(config-captive-portal-test)#terms-agreement
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
noResets or disables captive portal commands 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 33
4.1.12.2.11 use
captive-portal-mode commands
Configures a AAA policy and DNS whitelist with this captive portal policy. AAA policies are used to configure servers for 
this captive portal. DNS whitelists provide a method to restrict users to a set of configurable domains on the internet 
accessed through the captive portal.
For more information on AAA policy, see Chapter 8, AAA-POLICY.
For more information on DNS whitelists, see Chapter 4, GLOBAL CONFIGURATION COMMANDS.
Defines captive portal configuration settings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
use [aaa-policy |dns-whitelist ]
Parameters
• use [aaa-policy |dns-whitelist ]
Examples
rfs7000-37FABE(config-captive-portal-test)#use aaa-policy test
rfs7000-37FABE(config-captive-portal-test)#use dns-whitelist 
Captive_Portal_Allowed_URL_list
Related Commands
aaa-policy   Configures a AAA policy with this captive portal policy. AAA policies configure servers 
for the captive portal.
  – Specify the AAA policy name.
dns-whitelist Configures a DNS whitelist to use with this captive portal policy. DNS whitelists 
restrict access of URLs from a captive portal.
  – Specify the DNS whitelist name.
noResets or disables captive portal commands
dns-whitelistConfigures a DNS whitelist
aaa-policyConfigures a AAA policy 
						

							4 - 34 WiNG CLI Reference Guide
4.1.12.2.12 webpage-location
captive-portal-mode commands
Specifies the location of the Web pages used for authentication. These pages can either be hosted on the system or on an 
external Web server.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
webpage-location [advanced|external|internal]
Parameters
webpage-location [advanced|external|internal]
Examples
rfs7000-37FABE(config-captive-portal-test)#webpage-location internal
rfs7000-37FABE(config-captive-portal-test)#
rfs7000-37FABE(config-captive-portal-test)#webpage internal agreement  title  test123
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
advanced Uses Web pages for login, welcome, failure, and terms created and stored on the 
wireless controller
external Uses Web pages for login, welcome, failure, and terms located on an external server. 
Provide the URL for each of these pages
internal Uses Web pages for login, welcome, and failure that are automatically generated
noResets or disables captive portal commands
webpageConfigures Web pages displayed for the login, welcome, fail, and terms pages for a 
captive portal