Motorola Wing 5 Manual

							SHOW COMMANDS 6 - 73
6.1.38 session-changes
show commands
Displays configuration changes made in the current session
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show session-changes
Parameters
None
Examples
rfs7000-37FABE(config)#show session-changes
No changes in this session
rfs7000-37FABE(config)# 
						

							6 - 74 WiNG CLI Reference Guide
6.1.39 session-config
show commands
Lists active open sessions on a device
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show session-config {include-factory}
Parameters
• show session-config {include-factory}
Examples
rfs7000-37FABE(config)#show session-config
!
! Configuration of RFS7000 version 5.2.0.0-048B
!
!
version 2.1
!
!
ip access-list BROADCAST-MULTICAST-CONTROL
 permit tcp any any rule-precedence 10 rule-description permit all TCP traffic
 permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description permit DHCP 
replies
 deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description deny 
windows netbios
 deny ip any 224.0.0.0/4 rule-precedence 21 rule-description deny IP multicast
 deny ip any host 255.255.255.255 rule-precedence 22 rule-description deny IP local 
broadcast
 permit ip any any rule-precedence 100 rule-description permit all IP traffic
!
mac access-list PERMIT-ARP-AND-IPv4
 permit any any type ip rule-precedence 10 rule-description permit all IPv4 traffic
 permit any any type arp rule-precedence 20 rule-description permit all ARP traffic
--More--
rfs7000-37FABE(config)#
session-config 
include-factoryDisplays current session configuration
 include-factory – Optional. Includes factory defaults 
						

							SHOW COMMANDS 6 - 75
6.1.40 sessions
show commands
Displays CLI sessions initiated on a device
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show sessions {on }
Parameters
• show sessions {on }
Examples
rfs7000-37FABE(config)#show sessions on rfs7000-37FABE
INDEX   COOKIE  NAME            START TIME              FROM
1       4       snmp            2011-06-23 07:59:25     127.0.0.1
2       14      admin           2011-06-24 08:12:44     Console
3       15      admin           2011-06-24 08:42:26     172.16.10.10
rfs7000-37FABE(config)#
sessions Displays CLI sessions initiated on a device
on  Optional. Displays CLI sessions on a specified device
  – Specify the name of the AP or wireless controller. 
						

							6 - 76 WiNG CLI Reference Guide
6.1.41 smart-rf
show commands
Displays Smart RF management commands
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show smart-rf [calibration-status|channel-distribution|history|history-timeline|
interactive-calibration-config|radio]
show smart-rf [calibration-status|channel-distribution|history|history-timeline|
interactive-calibration-config] {on }]
show smart-rf radio {|activity|all-11an|all-11bgn|energy|neighbors|on ]
show smart-rf radio {|all-11an|all-11bgn|energy } {on }
show smart-rf radio {activity|neigbors}{|all-11an|all-11bgn|on }
show smart-rf radio {activity|neigbors}{|all-11an|all-11bgn} {on }
Parameters
• show [calibration-status|channel-distribution|history|history-timeline|
interactive-calibration-config] {on }
calibration-status 
{on }Displays Smart RF calibration status
 on  – Optional. Displays Smart RF calibration status on a specified 
RF Domain
  – Specify the RF Domain name.
channel-distribution 
{on }Displays Smart RF channel distribution
 on  – Optional. Displays Smart RF channel distribution on a 
specified RF Domain
  – Specify the RF Domain name.
history 
{on }Displays Smart RF calibration history
 on  – Optional. Displays Smart RF calibration history on a 
specified RF Domain
  – Specify the RF Domain name. 
						

							SHOW COMMANDS 6 - 77
• show smart-rf radio {|all-11an|all-11bgn|energy }{on }
• show smart-rf radio {activity|neighbors} {|all-11an|all-11bgn} {on }
Examples
rfs7000-37FABE(config)#show smart-rf calibration-status
No calibration currently in progress
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show smart-rf history
rfs7000-37FABE(config)#
history-timeline 
{on }Displays extended Smart RF calibration history on an hourly or daily timeline
 on  – Optional. Displays extended timeline on a specified 
RF Domain
  – Specify the RF Domain name.
interactive-calibration-config 
{on }Displays simulated calibration configuration
 on  – Optional. Displays configuration on a specified RF Domain
 on  – Specify the RF Domain name.
radio Displays radio related commands
 Optional. Displays details of a specified radio. Specify the MAC address of the radio in 
a  format.
all-11an Optional. Displays all 11a radios currently in the configuration
all-11bgn Optional. Displays all 11bg radios currently in the configuration
energy {} Optional. Displays radio energy
Specify the MAC address of the radio
  – Optional. Specify the radio’s MAC address in the
  format.
on  The following is common to above parameters:
 on  – Optional. Displays radio details on a specified RF Domain
  – Specify the RF Domain name.
radio Displays radio related commands
activity Optional. Displays changes related to radio power, number of radio channels, or 
coverage holes. Use additional filters to view specific details.
 Optional. Displays radio activity for a specified radio
  – Specify the MAC address of the radio.
all-11an Optional. Displays radio activity of all 11a radios in the configuration
all-11bgn Optional.Displays radio activity of all 11bg radios in the configuration
on  Optional. Displays radio activity of all radios within a specified RF Domain
  – Specify the RF Domain name. 
						

							6 - 78 WiNG CLI Reference Guide
6.1.42 spanning-tree
show commands
Displays spanning tree information
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show spanning-tree mst {configuration|detail|instance|on}
show spanning-tree mst {configuration {(on )}}
show spanning-tree mst {detail interface {|ge|me1|
port-channel|vlan } {(on )}}
show spanning-tree mst {instance  {interface } {(on )}}
Parameters
• show spanning-tree mst {configuration {(on )}}
• show spanning-tree mst {detail interface {
						

							SHOW COMMANDS 6 - 79
• show spanning-tree mst {instance  {interface } {(on )}}
interface [|
age |me1|
port-channel |
van ]Displays detailed MST configuration for a specified interface
  – Displays detailed MST configuration for a specified interface. Specify 
the interface name.
 age  – Displays GigabitEthernet interface MST configuration
  – Select the GigabitEthernet interface index from 1 - 4.
 me1 – Displays FastEthernet interface MST configuration
 port-channel – Displays port channel interface MST configuration
  – Select the port channel interface index from 1 - 2.
 vlan – Displays VLAN interface MST configuration
  – Select the SVI VLAN ID from 1 - 4094.
on  Optional. Displays detailed MST configuration on a specified device
  – Specify the name of the AP or wireless controller.
spanning-tree Displays spanning tree information
mst Displays MST configuration. Use additional filters to view specific details.
instance  Optional. Displays information for a particular MST instance
  – Specify the instance ID from 1 - 15.
interface [|
ge |me1|
port-channel |
vlan ]Optional. Displays MST configuration for a specific interface instance. The options are:
  – Displays MST configuration for a specified interface. Specify the 
interface name.
 ge – Displays GigabitEthernet interface MST configuration
  – Select the GigabitEthernet interface index from 1 - 4.
 me1 – Displays FastEthernet interface MST configuration
 port-channel – Displays port channel interface MST configuration
  – Select the port channel interface index from 1 - 2.
 vlan – Displays VLAN interface MST configuration
  – Select the SVI VLAN ID from 1 - 4094.
on  Optional. Displays MST configuration on a specified device
  – Specify the name of the AP or wireless controller. 
						

							6 - 80 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config)#show spanning-tree mst configuration on rfs7000-37FABE
%%
%  MSTP Configuration Information for bridge 1 :
%%------------------------------------------------------
%  Format Id      : 0
%  Name           : My Name
%  Revision Level : 0
%  Digest         : 0xac36177f50283cd4b83821d8ab26de62
%%------------------------------------------------------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show spanning-tree mst detail interface test on rfs7000-37FABE
% Bridge up - Spanning Tree Disabled
% CIST Root Path Cost 0  - CIST Root Port 0 - CIST Bridge Priority 32768
% Forward Delay 15 - Hello Time 2 - Max Age 20 - Max hops 20
% 1: CIST Root Id 800000157037fabf
% 1: CIST Reg Root Id 800000157037fabf
% 1: CIST Bridge Id 800000157037fabf
% portfast bpdu-filter disabled
% portfast bpdu-guard disabled
% portfast portfast errdisable timeout disabled
% portfast errdisable timeout interval 300 sec
% cisco interoperability not configured - Current cisco interoperability off
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show spanning-tree mst detail
% Bridge up - Spanning Tree Disabled
% CIST Root Path Cost 0  - CIST Root Port 0 - CIST Bridge Priority 32768
% Forward Delay 15 - Hello Time 2 - Max Age 20 - Max hops 20
% 1: CIST Root Id 800000157037fabf
% 1: CIST Reg Root Id 800000157037fabf
% 1: CIST Bridge Id 800000157037fabf
% 1: portfast bpdu-guard disabled
% portfast portfast errdisable timeout disabled
% portfast errdisable timeout interval 300 sec
% cisco interoperability not configured - Current cisco interoperability off
%   ge4: Port 2004 - Id 87d4 - Role Disabled - State Forwarding
%   ge4: Designated External Path Cost 0 - Internal Path Cost 0
%   ge4: Configured  Path Cost 11520 - Add type Implicit - ref count 1
%   ge4: Designated Port Id 0 - CST Priority 128
%   ge4: ge4: CIST Root 0000000000000000
%   ge4: ge4: Regional Root 0000000000000000
%   ge4: ge4: Designated Bridge 0000000000000000
%   ge4: Message Age 0 - Max Age 0
%   ge4: CIST Hello Time 0 - Forward Delay 0
%   ge4: CIST Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
%   ge4: Version Multiple Spanning Tree Protocol - Received None - Send MSTP
%   ge4: Portfast configured - Current portfast on
%   ge4: portfast bpdu-guard  enabled  - Current portfast bpdu-guard off
%   ge4: portfast bpdu-filter  enabled  - Current portfast bpdu-filter off
%   ge4: no root guard configured  - Current root guard off
%   ge4: Configured Link Type point-to-point - Current point-to-point
%   ge3: Port 2003 - Id 87d3 - Role Disabled - State Forwarding
%   ge3: Designated External Path Cost 0 - Internal Path Cost 0
%   ge3: Configured  Path Cost 11520 - Add type Implicit - ref count 1
%   ge3: Designated Port Id 0 - CST Priority 128
--More--
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show spanning-tree mst instance 1 interface test on rfs7000-
37FABE
rfs7000-37FABE(config)# 
						

							SHOW COMMANDS 6 - 81
6.1.43 startup-config
show commands
Displays complete startup configuration script
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show startup-config {include-factory}
Parameters
• show startup-config {include-factory}
Examples
rrfs7000-37FABE(config)#show startup-config include-factory
!
! Configuration of RFS7000 version 5.2.0.0-048B
!
!
version 2.1
!
!
ip access-list BROADCAST-MULTICAST-CONTROL
 permit tcp any any rule-precedence 10 rule-description permit all TCP traffic
 permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description permit DHCP 
replies
 deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description deny 
windows netbios
 deny ip any 224.0.0.0/4 rule-precedence 21 rule-description deny IP multicast
 deny ip any host 255.255.255.255 rule-precedence 22 rule-description deny IP local 
broadcast
 permit ip any any rule-precedence 100 rule-description permit all IP traffic
!
mac access-list PERMIT-ARP-AND-IPv4
 permit any any type ip rule-precedence 10 rule-description permit all IPv4 traffic
 permit any any type arp rule-precedence 20 rule-description permit all ARP traffic
--More--
rfs7000-37FABE(config)#
startup-config 
include-factoryDisplays startup configuration script
 include-factory – Optional. Includes factory defaults 
						

							6 - 82 WiNG CLI Reference Guide
6.1.44 terminal
show commands
Displays terminal configuration parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show terminal
Parameters
None
Examples
rfs7000-37FABE(config)#show terminal
Terminal Type: xterm
Length: 45     Width: 126
rfs7000-37FABE(config)#