Motorola Wing 5 Manual

							GLOBAL CONFIGURATION COMMANDS 4 - 75
change-passwdChanges the password for the current login user
clearClears some configurations
clockConfigures a device’s time and date
clrscrClears the current screen
clusterStarts the configuration for creating a cluster of servers
commitCommits changes made in the current CLI session
configureChanges the configuration mode
connectConfigures a remote device. This command uses a device’s hostname or MiNT ID to connect.
copyCopies a file from one location to another
cryptoConfigures the crypto command
deleteDeletes a file from a device’s filesystem
diffCompares two files and displays the difference
dirDisplays the content of a directory in the device’s file system
disableMoves the control to the User Exec mode
editEdits a file
enableMoves the mode to Privilege Exec mode
enableErases the content of the specified storage device. Also erases the startup configuration to 
restore the device to its default.
exitExits from the CLI
formatFormats the CF card installed on a device
haltStops a device
helpDisplays the CLI help
loggingConfigures a device’s logging
mintPerforms MiNT operations such as ping and traceroute
mkdirCreates a directory in the device’s file structure
moreDisplays a file in the console window
noReverts or negates a command
pageToggles paging of the command line interface
pingPings a device to check its availability
pwdDisplays the current working directory
reloadHalts a device and performs a warm reboot
renameRenames a file on a device’s file system 
						

							4 - 76 WiNG CLI Reference Guide
revertReverts changes made to the system during the current CLI session
rmdirRemoves a directory in a device’s file system
selfLoads a device’s configuration context
serviceExecutes service commands
sshConnects to a device using SSH
showDisplays a device’s state, configuration, and statistics
telnetUses Telnet to connect to a device
terminalConfigures the CLI display characteristics
time-itCaptures the time required to execute a command in the CLI
tracerouteTraces the path to target devices
upgradeUpgrades a device’s firmware from a file or a location
upgrade-abortAborts an upgrade in progress on a logged or a remote device
watchRepeats a CLI command at a periodic interval
writeWrites the changes made in the current session to the memory 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 77
4.1.21 end
Global Configuration Commands
Ends and exits the current mode and moves to the PRIV EXEC mode
The prompt changes to the PRIV EXEC mode.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
end
Parameters
None
Examples
rfs7000-37FABE(config)#end
rfs7000-37FABE# 
						

							4 - 78 WiNG CLI Reference Guide
4.1.22 event-system-policy
Global Configuration Commands
Configures how events are supported by the wireless controller. Each event can be configured individually to perform an 
action such as sending an e-mail or forwarding a notification to its parent wireless controller etc.
Table 4.10Event System Policy Commands
Command Description Reference
event-system-policyConfigures the event system policypage 4-79 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 79
4.1.22.1 event-system-policy
event-system-policy
Configures a system wide events handling policy
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
event-system-policy 
Parameters
• event-system-policy 
Examples
rfs7000-37FABE(config)#event-system-policy event-testpolicy
rfs7000-37FABE(config-event-system-policy-event-testpolicy)#?
rfs7000-37FABE(config-event-system-policy-event-testpolicy)#?
Event System Policy Mode commands:
  event    Configure an event
  no       Negate a command or set its defaults
  clrscr   Clears the display screen
  commit   Commit all changes made in this session
  do       Run commands from Exec mode
  end      End current mode and change to EXEC mode
  exit     End current mode and down to previous mode
  help     Description of the interactive help system
  revert   Revert changes
  service  Service Commands
  show     Show running system information
  write    Write running configuration to memory or terminal
rfs7000-37FABE(config-event-system-policy-event-testpolicy)#
Related Commands
 Specify the event system policy name. If the policy does not exist, it is created.
noRemoves an event system policy 
						

							4 - 80 WiNG CLI Reference Guide
4.1.22.2 event-system-policy mode commands
event-system-policy
Table 4.11 summarizes event system policy mode commands
Ta b l e  4 . 1 1event-system-policy mode commands
Command Description Reference
eventConfigures an eventpage 4-81
noNegates a command or sets its default valuespage 4-91
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5
exitEnds the current mode and moves to the previous modepage 5-6
helpDisplays the interactive help systempage 5-7
revertReverts changes to their last saved configurationpage 5-13
serviceInvokes service commands to troubleshoot or debug 
(config-if) instance 
configurationspage 5-14
showDisplays running system informationpage 6-4
writeWrites information to memory or terminalpage 5-42 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 81
4.1.22.2.1  event
event-system-policy mode commands
Configures an event and sets the action performed when the event happens
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
event   (email,forward-to-switch,snmp,syslog) [default|on|off]
NOTE: The parameter values for  and  are summarized in the 
table under the Parameters section. 
						

							4 - 82 WiNG CLI Reference Guide
Parameters
• event   (email,forward-to-switch,snmp,syslog) [default|on|off]
 
aaa Configures authentication, authorization, and accounting related event messages
 radius-discon-msg – RADIUS disconnection message
 radius-session-expired – RADIUS session expired message
 radius-session-not-started – RADIUS session not started message
 radius-vlan-update – RADIUS VLAN update message
adv-wips Configures advanced WIPS related event messages
 adv-wips-event-1 – Event adv-wips-event-1 message
 adv-wips-event-10 – Event adv-wips-event-10 message
 adv-wips-event-105 – Event adv-wips-event-105 message
 adv-wips-event-109 – Event adv-wips-event-109 message
 adv-wips-event-11 – Event adv-wips-event-11 message
 adv-wips-event-110 – Event adv-wips-event-110 message
 adv-wips-event-111 – Event adv-wips-event-111 message
 adv-wips-event-112 – Event adv-wips-event-112 message
 adv-wips-event-113 – Event adv-wips-event-113 message
 adv-wips-event-114 – Event adv-wips-event-114 message
 adv-wips-event-115 – Event adv-wips-event-115 message
 adv-wips-event-116 – Event adv-wips-event-116 message
 adv-wips-event-117 – Event adv-wips-event-117 message
 adv-wips-event-118 – Event adv-wips-event-118 message
 adv-wips-event-119 – Event adv-wips-event-119 message
 adv-wips-event-12 – Event adv-wips-event-12 message
 adv-wips-event-120 – Event adv-wips-event-120 message
 adv-wips-event-121 – Event adv-wips-event-121 message
 adv-wips-event-13 – Event adv-wips-event-13 message
 adv-wips-event-14 – Event adv-wips-event-14 message
 adv-wips-event-142 – Event adv-wips-event-142 message
 adv-wips-event-16 – Event adv-wips-event-16 message
 adv-wips-event-19 – Event adv-wips-event-19 message
 adv-wips-event-2 – Event adv-wips-event-2 message
 adv-wips-event-21 – Event adv-wips-event-21message
 adv-wips-event-220 – Event adv-wips-event-220 message 
						

							GLOBAL CONFIGURATION COMMANDS 4 - 83
 adv-wips-event-221 – Event adv-wips-event-221 message
 adv-wips-event-222 – Event adv-wips-event-222 message
 adv-wips-event-25 – Event adv-wips-event-25 message
 adv-wips-event-26 – Event adv-wips-event-26 message
 adv-wips-event-29 – Event adv-wips-event-29 message
 adv-wips-event-3 – Event adv-wips-event-3 message
 adv-wips-event-47 – Event adv-wips-event-47 message
 adv-wips-event-63 – Event adv-wips-event-63 message
 adv-wips-event-87 – Event adv-wips-event-87 message
ap Configures AP event messages
 adopted – Event AP adopted message
 adopted-to-controller – Event AP adopted to wireless controller message
 ap-adopted – Event access port adopted message
 ap-autoup-done – Event AP autoup done message
 ap-autoup-fail – Event AP autoup fail message
 ap-autoup-needed – Event AP autoup needed message
 ap-autoup-no-need – Event AP autoup not needed message
 ap-autoup-reboot – Event AP autoup reboot message
 ap-autoup-timeout – Event AP autoup timeout message
 ap-autoup-ver – Event AP autoup version message
 image-parse-failure – Event image parse failure message
 legacy-auto-update – Event legacy auto update message
 no-image-file – Event no image file message
 reset – Event reset message
 sw-conn-lost – Event software connection lost message
 unadopted – Event unadopted message
captive-portal Configures captive portal (hotspot) related event messages
 allow-access – Event client allowed access message
 auth-failed – Event authentication failed message
 auth-success – Event authentication success message
 client-disconnect – Event client disconnected message
 client-removed – Event client removed message
 flex-log-access – Event flexible log access granted to client message
 inactivity-timeout – Event client time-out due to inactivity message
 purge-client – Event client purged message
 session-timeout – Event session timeout message   
						

							4 - 84 WiNG CLI Reference Guide
certmgr Configures certificate manager related event messages
 ca-cert-actions-failure – Event CA certificate actions failure message
 ca-cert-actions-success – Event CA certificate actions success message
 ca-key-actions-failure – Event CA key actions failure message
 ca-key-actions-success – Event CA key actions success message
 cert-expiry – Event certificate expiry message
 crl-actions-failure – Event Certificate Revocation List (CRL) actions failure 
message
 crl-actions-success – Event CRL actions success message
 csr-export-failure – Event CSR export failure message
 csr-export-success – Event CSR export success message
 delete-trustpoint-action – Event delete trustpoint action message
 export-trustpoint – Event export trustpoint message
 import-trustpoint – Event import trustpoint message
 rsa-key-actions-failure – Event RSA key actions failure message
 rsa-key-actions-success – Event RSA key actions success message
 svr-cert-actions-success – Event server certificate actions success message
 svr-cert-actions-failure – Event server certificate actions failure message
cfgd Configures configuration daemon module related event messages
 acl-attached-altered – Event Access List (ACL) attached altered message
 acl-rule-altered – Event ACL rule altered message
cluster Configures cluster module related messages
 max-exceeded – Event maximum cluster count exceeded message
crm Configures Critical Resource Monitoring related event messages
 critical-resource-down – Event Critical Resource Down message
 critical-resource-up – Event Critical Resource Up message
dhcpsvr Configures DHCP server related event messages
 dhcp-start – Event DHCP server started message
 dhcpsvr-stop – Event DHCP sever stopped message
 relay-iface-no-ip – Event no IP address on DHCP relay interface message
 relay-no-iface – Event no interface for DHCP relay message
 relay-start – Event relay agent started
 relay-stop – Event DHCP relay agent stopped