Panasonic 3D Eyewear TY-ER3D4MU, TY-ER3D4SU Operating Instructions

Operating Instructions
3D Eyewear
  Model No.  TY-ER3D4MU
    TY-ER3D4SU
This product cannot be used as sunglasses. 
ENGLISH
FRANÇAIS ESPAÑOL
TQZJ403 

ENGLISH
2
Thank you for purchasing a Panasonic 
product. 
 
 
Before operating this product, please read the instructions 
carefully, and save this manual for future use.
 
 
Before using this product, be sure to read “Safety Precautions” 
and “Using Precautions” (
 pages 2 - 7).
This 3D Eyewear can be used for Panasonic HDTVs 
supporting 3D and Bluetooth® Wireless technology, 
that have the logo as shown below. ( page 22)
For the latest information on applicable models, visit 
our web site....

ENGLISH
3
Accidental Ingestion
„„Keep 3D Eyewear parts in places out of the reach of 
children.
There is a danger small children could swallow such parts by mistake.
•  If a child accidentally swallows such parts, seek immediate medical 
attention.
Disassembly
„„Do not disassemble or modify the 3D Eyewear.When disposing this product, refer to “Disposal” ( page 11 - 13) 
for proper removal and disposal of the rechargeable battery.
Charging
„„ Charge by connecting the included...

ENGLISH
4
Use of 3D Eyewear
„„Parents/guardians should monitor children’s viewing 
habits to avoid their prolonged use without rest 
periods.
„„ In commercial application and public viewing, 
someone in authority should convey the precautions 
and monitor the user of the 3D Eyewear.
„„ Only use the 3D Eyewear for its intended 3D content 
viewing purpose.
„„ Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in...

ENGLISH
5
FCC STATEMENT
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee...

ENGLISH
6
Using Precautions
Lens
 
 
Do not apply pressure to the liquid crystal shutter. Also, do 
not drop or bend the 3D Eyewear.
 
 
Do not scratch the surface of the liquid crystal shutter with 
a pointed instrument etc. Doing so may cause damage to 
the 3D Eyewear, and reduce the quality of the 3D image.
Cautions during viewing
 
 
Do not use devices that emit strong electromagnetic waves 
(such as cellular phones or personal transceivers) near 
the 3D Eyewear. Doing so may cause the 3D Eyewear to...

ENGLISH
7
 
 
Use in area of Bluetooth® signals from other devices may 
interfere with 3D Eyewear operation.
Using radio waves
This unit uses the 2.4 GHz radio frequency ISM band 
(Bluetooth®). However other wireless equipment may use the 
same frequency. Be sure to take note of the following to prevent 
radio wave interference from other equipment.
„„ Restriction of useFor use only in your country.
„„Range of useThe range of use is up to approximately 3.2 m (10.5 ft.). The range may...

ENGLISH
8
Identifying Controls
 
 
Power switch
 
 
Indicator lamp
 
 
Charging port (DC IN)
 
 
Power switch
ON/OFF Slide the tab to the ON/OFF position to switch 
the power on/off.
MODE Slide the tab once to the MODE position to 
change the mode between 3D and 2D.
•  2D: View a 3D image in 2D.This is also used when registering the 3D 
Eyewear on the television. For details on 
registration, refer to the Registration page. 
(
 page 10)
 
 
Indicator lamp
Lights or fl ashes during use or charging to show...

ENGLISH
9
„„Indicator lamp status
Indicator lamp
Status 
Lights red for 2 seconds when 
turned on Suffi cient battery level
Flashes red 5 times when 
turned on Low battery level
Flashes red and green 
alternately Under registration
Flashes green once every 2 
seconds Under reconnecting to the TV
Lights green for 3 seconds Registration or reconnecting  is successfully completed.
Flashes red 3 times Automatically power off
(Registration or reconnecting 
fails or connection is lost)
Flashes red...

ENGLISH
10
Registration
„„First RegistrationPerform the First Registration when the 3D Eyewear is used 
for the first time.
1.  Turn on the TV to see and select the 3D mode. 
2.  Slide the tab from the OFF position to the ON position.  The 3D Eyewear will power on and start registration. 
Place the 3D Eyewear within 1.6 feet (50 cm) from the TV 
while the registration is in progress. 
3.  The green LED lights on the 3D Eyewear for 3 seconds when  the registration is successfully completed....