Panasonic Digital AV Mixer Agmx70 Operating Instructions

Before attempting to connect, operate or adjust this product, please read these instructions completely.
AG- P
Digital AV Mixer 

2
indicates safety information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR  BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to...

3
Overview
This digital audio mixer is designed for a host of applications including cases where the video signals of video equipment are
combined through digital processing or where many different kinds of effects are added.  It incorporates two frame
synchronizers, a feature which makes it unnecessary for two video signals to be synchronized.  Its dedicated software
program, the MX-Navi, enables titles to be downloaded from a PC to facilitate the insertion of titles.  In addition to the wipe,
mix and...

4
Contents
Overview .......................................................... 3
Parts and their functions ................................ 6
Front panel controls  ..................................................... 6
Rear panel connection area  ....................................... 14
External interfaces ........................................ 17
GPI ................................................................................ 17
RS-422A...

5
Contents
About this software  ...................................... 74
Description of the software ........................................ 74
System requirements  ................................................. 74
Overview of MX-Navi  .................................... 74
Processing of image data  ............................ 75
By data type  ................................................................ 75
Display methods  ......................................................... 75
DSK...

6
Modify
POWERX / Y
Pb / PrON
OFF
ASPECTZ
HV
ON
PATTERN
CENTERSCENE
GRABBEREDITORHOLD
DR
POWER switch
This is used to switch the AC power on and off.  Select
“Power” from the “Setup” initial setting screen: “Reset” is
selected to establish the default setting when the power
is turned ON, and “Preset” is selected to start operation
using the same settings which were in effect upon
conclusion of the previous operation.  When [Demo] is
selected, the demo mode is established after the power
is turned on....

7
P in P
Modify
PATTERNREV
LUM
MIXCHRMEXT ONE
WAYDSKEFFECTS
DR
Parts and their functions
REV (reverse) button
This button is used to reverse the keys and transition key
patterns, reverse the frame in/out, and reverse the
chroma key, luminance key, external key and title 
αkey
signals.
The button’s lamp flashes with patterns that have no
reverse operations, indicating that these patterns cannot
be reversed.
171
2
ONE WAY button
At the AB bus setting stage, this button sets the transition
pattern to a...

8
Parts and their functions
Preview output selection area
The controls in this area are used to determine which
images among the transition preview, DSK preview and A/B
bus images are to be output from the PREVIEW output
connector on the rear panel.
Effect execution button area
Modify
PREVIEWME
PRV
DSKA
PROG
A
PROG
STILLSTROBEVIDEOEFFECTSCOLOR
EFFECTSBPRESETBPRESET
EFFECTS
MIX EFFECT
DR
ME PRV selector button
This button is used to select ME preview as the image to
be output to the preview connector....

9
SET UPINT
VIDEODSK
FADEAUDIOEFFECTS
POS.X  119
Z  235X  107
EVENT
00E
ME Time
02:00FPattern2101
INT
WhtTransition
Pattern
Edge
EffectsHard
OffLight
On
Mo Modif dify
CONTRAST
DR
Parts and their functions
Setting panel area
LCD (liquid crystal) display
The effect parameters, time settings and other
information are shown on this display.
19
A
2
Joystick, Z parameter display area
During positioning, the X/Y/Z parameters are displayed
here; during the color settings, the Pb/Pr/Y parameters
are displayed.
3...

10
Parts and their functions
A
LCD CONTRAST control
This control is used to adjust the contrast of the LCD
display.
B
SET UP (initial setting page display) button
This button displays the initial setting page.
D
DSK FADE (DSK/fade setting page display)
button
This button displays the DSK/fade setting page.
C
INT VIDEO (internal video setting page
display) button
This button displays the internal video setting page.
E
AUDIO EFFECTS (audio effect setting page
display) button
This button displays the audio...