Panasonic Digital Copier Dp 150fx Operating Instructions
Here you can view all the pages of manual Panasonic Digital Copier Dp 150fx Operating Instructions. The Panasonic manuals for Copier are available online for free. You can easily download all the documents as PDF.
Page 41
41 BASIC OPERATIONS Resolution (see Note 1) Your machine is preset to Standard resolution, which is suitable for most documents. Use Fine or Super Fine for detailed originals. To temporarily change the Resolution, follow the steps below. When you set RESOLUTION = STANDARD : For normal original(s) (Factory Default) When you set RESOLUTION = FINE : For detailed original(s) Ex: Newspapers When you set RESOLUTION = S-FINE : For finer detailed original(s) Make sure that the FAX Mode indicator is ON. If...
Page 42
42 Communication Journal (COMM. JOURNAL) (see Note 1)A Communication Journal lets you verify if the transmission was successful. You can select the condition to print the Communication Journal as follows. When you set COMM. JOURNAL = OFF : a Communication Journal will not print. When you set COMM. JOURNAL = ON : a Communication Journal prints automatically after every communication. When you set COMM. JOURNAL = INC. : a Communication Journal prints only if the communication has failed. Make sure that...
Page 43
43 BASIC OPERATIONS Sending Documents You can choose either Memory or Direct Transmission. Use Memory Transmission if: You want to send the document to multiple stations. You have to retrieve the original(s) immediately. You want to take advantage of Dual Operation design. Use Direct Transmission if: The memory is full. You want to send the document(s) immediately. Use Voice Mode Transmission if: You want to send the document(s) after talking with the other par ty first. You want to send the...
Page 44
44 (see Note 1)Å@Å@ (see Note 2)Å@Å@ (see Note 3)Å@Å@ (see Note 4) (see Note 5) NOTE 1. While storing, the File Number of the document(s) being stored is shown at the upper right corner of the display. It is also printed on the Communication Journal (COMM. JOURNAL), Transaction Journal and File List. The percentage of memory used is shown on the lower right corner of the display after each page is stored. 2. If memory overflow occurs while storing documents, the remaining documents on the ADF will be...
Page 45
45 BASIC OPERATIONS Manual Number Dialing (see Note 1) (see Note 2) (see Note 3) To dial the telephone number manually, follow the steps below. Make sure that the FAX Mode indicator is ON. If not, press to select the FAX MODE. 1a Set the original(s) face up on the ADF. 1b Place a book or an original face down on the Platen Glass. 2 Enter a telephone number from the keypad. Ex: 3 12 45 78 03 6 9 abc..+ - FA XSTART FAX ENTER STATION(S) THEN PRESS START 00% OCT-12-2000 15:00 0 0...
Page 46
46 NOTE 1. If you need a special access number to get an outside line, dial it first then press to enter a pause (represented by a -) before dialing the full number. Ex: 9 PAUSE 5551234 2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press (represented by a /). The dialing mode will be changed from Pulse to Tone after dialing the digit /. Ex: 9 PAUSE TONE 5551234 3. If no action is taken within 60 seconds, the machine will start dialing. ADF Scanning...
Page 47
47 BASIC OPERATIONS Directory Search Dialing Directory Search Dialing allows you to dial a full telephone number by searching the stations name. Make sure that the FAX Mode indicator is ON. If not, press to select the FAX MODE. 1a Set the original(s) face up on the ADF. 1b Place a book or an original face down on the Platen Glass. 2 or repeatedly until the display shows the station name you want to send to. 3 12 45 78 03 6 9 abc..+ - + -FA XSTART FAX ENTER STATION(S) THEN PRESS START 00%...
Page 48
48 (see Note 1) ADF Scanning 4a All document(s) are stored into memory with a file number. Then, the machine star ts dialing the telephone number. Platen Glass (Flatbed) Scanning 4b When an original is placed on the Platen Glass, the display is as shown to the right. (1) Press or to select the size of the original on the Platen Glass and press to store the document. (2) To store another original into memory, press 1 to select YES. If there are no other originals, press 2 to select NO. (See Note...
Page 49
49 BASIC OPERATIONS Multi-Station Transmission (Broadcasting) (see Note 1) If you have to send the same document(s) to multiple stations, you can save time in feeding the document(s) by using memory transmission. That is, you can store the document(s) into memory and then send it to the station(s) automatically. (See Note 1) NOTE 1. The Fax Parameter No. 05 (MEMORY) position must be in the factory default setting (ON). (See page 35) Make sure that the FAX Mode indicator is ON. If not, press to...
Page 50
50 (see Note 1) (see Note 2)ADF Scanning 4a All document(s) are stored into memory with a file number. Then, the machine star ts dialing the telephone numbers in sequence. Platen Glass (Flatbed) Scanning 4b When an original is placed on the Platen Glass, the display is as shown to the right (1) Press or to select the size of the original on the Platen Glass and press to store the document. (2) To store another original into memory, press 1 to select YES. If there are no other originals, press...