Panasonic Digital Imaging System DP-3510/4510/6010 Copier & Network Scanner Operating Instructions

							91
Options
Accessories
5. If the unit fails to staple after replacing the staple follow the instruction below.
2
3
Remove the staple cartridge
according to staple replacing
procedures steps 1 to 4.
(See page 90)
1
2
Reinstall the staple cartridge
according to staple replacing
procedures steps 7 to 10 and
check operation. 
(See page 90)
Pull out the finisher.
#Pull out the trash box.
$Dispose the punch hole residue.
1
3
4
Return the finisher to original
position. 6. Punch disposal
Jammed
Staple
Trash Box
Finisher Entry Guide
P091_dp4510(pb).P657/31/02, 10:50 AM 91 
						

							92
1-Bin Saddle-Stitch Finisher (DA-FS355) Accessories
1. Components
Bin
CHole Punch
CStaples
2. Features
Stitch Tray
CSaddle Stitcher Tray
(1-Bin Finisher)
CShift electronic sort copy
CA5, FLS size is not applicable
for Shift-sort and Shift-group.CStaple electronic
sort copy
CUp to 50 sheets
(A4, A4 R)/
25 sheets
(A3, B4)
CPaper weight:
64 - 80 g/m
2
CStack by punch
4 hole: A4/A3
Staple-sortShift-sort
1
1
1
PunchShift-group
14
6 2
3
5
(DA-SP41)
CStaple electronic
sort copy
CUp to 40 originals
(A3, B4, A4 R)
CPaper weight:
64 - 80 g/m
2
Saddle-Stitch
Punch Hole Residue
Indicator Light
P092-093_dp4510(pb).P657/31/02, 10:50 AM 92 
						

							93
Accessories
B4·FLS
2. How to use
i-ADF
Face-Up
Platen
4
Number
of Copies
5Staple Position
(ex. $-1)
Face-Down1
Place the
Original
23
Select
SORT/
FINISH
modeSelect
Finisher
Mode
Select the type of copy group mode into inverting
unit.
#SHIFT-SORT
*
Multiple copies are sorted automatically and
stacked with shift.
$STAPLE-SORT
Following functions can be selected by pressing.
Staple-Sort button.
$-1:Top left corner (1 position) (except A5 C )
$-2:Left (2 positions) (except A5 C )
$-3:
Bottom left corner (1 position) (except A5 C )
%SHIFT-GROUP*
Multiple copies are stored by shifting.
&NON-SORT
Copy is stored on the tray.
(PUNCH
Copies are punched and exited onto bin/tray.
∗The Shift-Sort is not available in the
first set when the memory is full.
A5 size is not applicable for Shift-
sort and Shift-group.
Options
Press
START
CIf output sheets are curled, or not properly aligned, remove the paper from
the paper tray, turn it over, and replace it in the paper tray.NOTE
P092-093_dp4510(pb).P657/31/02, 10:50 AM 93 
						

							94
6
New Staple Case
7
8
9
10
Close the Finisher Front Cover.
11
Check the operation
Select the staple-sort mode with control
panel and print the desired data.
Accessories
4. Replacing the staple car tridge
1
3
The message shown on the left appears
when the staples run out.
4
5
Empty Staple Case
2
Tape
1-Bin Saddle-Stitch Finisher (DA-FS355)
Finisher Front Cover
Blue Mark
Stapler Unit
Staple Cartridge
Staple Cartridge
Stapler Unit
P094_dp4510(pb).P657/31/02, 10:50 AM 94 
						

							95
Options
Accessories
5. If the unit fails to staple after replacing the staple follow the instruction below.
2
3
Remove the staple cartridge
according to staple replacing
procedures steps 1 to 4.
(See Page 94)
1
#Lift up the Cartridge Knob.
$Remove the jammed staple.
%Return the Cartridge Knob.
2
Reinstall the staple cartridge
according to staple replacing
procedures steps 7 to 9 and check
operation. 
(See Page 94)
Pull out the finisher.
Pull out the trash box.
1
3
#Dispose the punch hole residue.
$Return the trash box.
4
Return the finisher to original
position. 6. Punch disposal
P095_dp4510(pb).P657/31/02, 10:50 AM 95 
						

							96
memo
P096-097_dp4510(pb).P657/31/02, 10:50 AM 96 
						

							97
Network Scanner
B4·FLS
4
Select desired
MODE SETTINGS
5
Press
START
1
Place the
Original
23
Press the SCAN/
FILE keySelect
destination from
the ADDRESS
BOOK

 

 


Document Scanning
To use the Network Scanner feature, you must first install and configure the included Panasonic
Document Management System (PDMS) onto you PC.
Network Scanner (Option)
3
4
#Select a destination from the
ADDRESS BOOK.
$Select the Resolution.
%Select the Original mode.
&Select the Exposure.
(Press the START key.
Document Scanning
The Scanner Reception Notice appears on the destination PC. The document is scanned and the image is conveyed to the selected destination.
6
7
#The Document Manager Software (or
your designated viewer) will start on your
PC.
$Double click the Document Desktop.
%Click the Network Scanner Image folder.
&The scanned Image(s) will be displayed. #This notice is displayed on the
destination PC.
$To view the scanned image, click the
Display button.
P096-097_dp4510(pb).P657/31/02, 10:50 AM 97 
						

							98
Network Scanner (Option)
Address Book
1
2
3

 

 


Adding a New PC’s IP Address
Inputting PC IP Addresses for PC Scanning into the Address Book.
To add a new IP Address for a PC, follow the steps below
4
Enter the IP Address by using
the Keypad and then touch the
OK button.
Ex: 123.001.056.215
NOTE:When entering one
or two digit address,
add “00” or “0”
before that address.
Then enter the station name by
using the QWERTY keyboard
then touch the OK button.
(Up to 15 characters)
Ex: SALES  DEPT
Touch Scanner Settings button
and touch “05 Add new
address”. Press Function Key.
Button Name Function
CAPSUsed to input upper case letter(s).
NUMERIC/Used to input numbers and symbols.
SYMBOLS
# 
When touching the NUMERIC/SYMBOLS button,
a list with numbers and symbols is displayed.
$ Select the required number(s) or
symbol(s) then, touch the CLOSE button.
Used to move the cursor to the left or to the right side.
BACK SPACEUsed to erase the character before the cursor.
SPACEUsed to enter a space.
OKUsed to complete your entry.
CANCEL
Used to cancel your entry.
P098-099_dp4510(pb).P657/31/02, 10:50 AM 98 
						

							99
5
Then enter the key name (up to 15
characters).
(By default, the key name will be up to
15 characters of the station’s name. If
you do not want to change it, touch the
OK button.)
NOTE∗If you select DD, input will be noticed as DD server. (See page 103 )
CIf you make a mistake, use I  or H to move the cursor beyond the incorrect
character, press CLEAR then re-enter the new character.
CThe Address Book cannot be changed or erased until the communication
has finished.
To change or erase the settings, wait until finish communication.
Network Scanner (Option)
Network Scanner
6
If you want to assign this address into
the Favourite section, press YES,
otherwise press NO.
Note: The Address Book area is
reduced by the number of
assigned Favourite stations.
7
Select PC*
 then touch the OK button.
8
Touch the OK button.
Do not change the default Port Number
without your Network Administrator’s
approval.
(Up to 65535, default is 06509)
To record another PC’s IP Address,
repeat steps 3 to 8.
P098-099_dp4510(pb).P657/31/02, 10:50 AM 99 
						

							100
1
Address Book Network Scanner (Option)
2
Select the station you wish to change.
Ex: SALES DEPT
3
Then enter a new IP Address and
touch the OK button.
E
x: 123.001.056.220
NOTE:When entering one or two digit
address, add “00” or “0” before
that address.4

 

 


Editing the Address Book
If you have to change or erase any of the Address Book stations, follow the steps below.
To change the settings of an Address Book station
Touch the Scanner Settings button
and touch “06 Edit address book”. Press Function Key.
P100-101_dp4510(pb).P657/31/02, 10:50 AM 100