Panasonic Digital Imaging System DP-3510/4510/6010 Copier & Network Scanner Operating Instructions

							71
Making Copies
NOTE
Function
Copier Settings for Key Operator

 

 


Input the Key Operator ID Code to change Settings
Screen
No.ModesInitial
Setting Function
01/0501 Original mode default
Selects contrast for Text/Photo mode
C1 ~ 7 03 T/P contrast 4
04 Photo contrast Selects contrast for Photo mode
C1 ~ 7T/P Selects original setting
CText, T/P (Text/Photo), Photo
4 Selects contrast for Text mode
C1 ~ 7 02 Text contrast
02/054
06 Interleaving default Selects OHP interleaving paper
CBlank, CopyBlank
09 SADF mode Enables or disables the use of SADF function.
CNo, YesYe s
CIt is necessary to input the Key Operator ID code before changing items on
this page.
07 Page insertion default Selects page insertion
CBlank, CopyBlank
08 Cover mode default Selects cover paper
CF, Blank, F, Copy
FB, Blank, FB, Copy
(F: Front, FB: Front + Back)F, Blank
00 Paper size priority A4Selects paper size priority
CA3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 × 13, 8.5 × 13
P070-071_4510(pb).p657/31/02, 10:50 AM 71 
						

							72
Copier Settings for Key Operator
NOTE

 

 


Input the Key Operator ID Code to change Settings
Screen
No.ModesInitial
Setting Function
03/0510 Maximum copy setting Determines whether to limit number of copies
(0-99).
Input a size in job memory 2 for frequently
used size.
CX: 5~432/Y: 5~297 mm
(See page 54)0
(No limit)
13 M2, Size
95×220 mm(X) (Y)
70×160 mm(X) (Y)Input a size in job memory 1 for frequently
used size.
CX: 5~432/Y: 5~297 mm
(See page 54) 12 M1, Size
04/0516 Memory overflow
warningSelects the task to perform when memory
overflow occurs
CPrint, CancelPrint
17  Toner save mode (T) Selects the toner save in Text mode.
CNone, Level 1, Level 2*None
18 Toner save mode (T/P) Selects the toner save in Photo/Text mode.
CNone, Level 1, Level 2*None
CIt is necessary to input the Key Operator ID code before changing items on this page.
∗Toner will be saved when selecting the Level 1 or 2 but copy quality will be dropped
less than None mode when selecting the Level 1 or 2.
Save value (Panasonic authorised 6 % density original):
Level 1: maximum approximately 10 % less than None mode.
Level 2: maximum approximately 20 % less than None mode.
Function
19 Toner save mode (P) Selects the toner save in Photo mode.
CNone, Level 1, Level 2*None
P072-073_4510(pb).p657/31/02, 10:50 AM 72 
						

							73

 

 


Input the Key Operator ID Code to change Settings
Screen
No.ModesInitial
Setting Function
05/0520 Add new tandem
destinationInputs a new destination to split the copy job
Edits a copy destination 21 Edit tandem
destination
Deletes a copy destination 22 Delete tandem
destination
Function
Making CopiesPrint the copier settings
CStart, Stop 23 Copier settings print
NOTECIt is necessary to input the Key Operator ID code before changing items on
this page.
P072-073_4510(pb).p657/31/02, 10:50 AM 73 
						

							74
Printer Setting for Key Operator
NOTE

 

 


Input the Key Operator ID Code to change Settings
Screen
No.Initial
Setting Function
01/03Sets the job completion time setting.
C1~ 999 sec.
Sets print the error page.
COff, On180 sec.
On Off
Compress automatically then print out.
COff, On
02/03Sets the status page print of PS.
CStop, Start
Sets the printer status print.
CStop, Start
Sets the font list print of PCL.
CStop, Start
∗Functions except 0 and 11 are available when optional accessories are installed.
C
It is necessary to input the Key Operator ID code before changing items on this page.
∗∗When the No. 12 function is set, turn OFF and ON the Power Switch.
Function
Sets the font list of PS.
CStop, Start
Sets the spool function.
COff, OnOn
Prints text page only.
COff, OnOn
Sets the automatic holding function of mailbox data.
CInfinity, 1 day, 2 days, 3 days, 4 days, 6 days, 7 days
7 days
03/03
Sets delete the mailbox data.*
CAll, BeforeBefore
Sets authorisation to delete the print queue.
CFree, Key op. (operator)Key op.
06 Printer settings print
07 Font list print (PCL)
08 Font list print(PS)
09 Mailbox data holding
11 Print queue delete 10 Delete mailbox data 00 Job completion time
01 Page protection
02 Error page print
03 Spool function
04 Text  print
05 PS Configuration print
Modes
12 EtherTalk Zone name Input a EtherTalk Zone name.**
CMaximum 32 charcters
P074-075_4510(pb).p657/31/02, 10:50 AM 74 
						

							75
Making Copies
Function Setting for Key Operator

 

 


Changing the Auto Contrast Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.
1FUNCTION Key
2#Touch COPIER SETTINGS.
Function
$Proceed to next page.
%Select 08 Auto contrast adjust.
&Select whether Auto Exposure is to be
performed, and then touch the OK button.
(Press the RESET key, then exit the Function
mode.
Proceed as Follows:
B4·FLS
Press the FUNCTION Key.
P074-075_4510(pb).p657/31/02, 10:50 AM 75 
						

							76
Function Setting for Key Operator

 

 


Changing the Paper Size
The paper trays are designed to accommodate A5, A4, A4 R, B4/FLS and A3 Size paper. To
change the paper size, perform the steps shown below. It is not required to take step 1 and 2
when selecting Tray 2.
1FUNCTION Key
2
Proceed as Follows:
#Touch GENERAL FUNCTIONS.
$Select 04 Set key operator code
button.
%Input ID Code (4 digits) and touch the
OK button.
&Select 00 Paper size.(Touch the Paper Tray you wish to
change and touch the SIZE CHANGE
button.
)Touch the Paper Size you wish to
change and touch OK button.
*Touch the OK button.
+Press the RESET key, then exit the
Function mode.
Function
B4·FLS
Only 3 kind of Paper Size (A4, B5 and
Letter) will be available when selecting
Tr a y  1 .Tray 2 only
Press the FUNCTION Key.
P076-077_4510(pb).p657/31/02, 10:50 AM 76 
						

							77
NOTE
Function
Changing the Paper Guide and Paper Size Indicator in the Paper Tray
#Pull out paper tray and remove the
paper.
$Move the paper guide a to the
required paper length.
%Move the paper guide b to the
required paper width.
Pinch the stopper to move the paper
guide b.
&Change the paper size indicator.
For Tray  2:Insert the paper size indicator
which showing the same
paper size selected at $&
%, then the paper size will be
automatically selected.
(Close the paper tray.
3
CIt is recommended that the paper guide b be fixed in place with screws.
Consult an authorised servicing dealer for details on how to fasten using
screws.
Making Copies
a
b
A5
A4
A4B4.
FLS
A3
P076-077_4510(pb).p657/31/02, 10:50 AM 77 
						

							78
B4·FLS

 

 


Department Counter
Key Operator can manage, limit copies, counters and code numbers for each department.
(Maximum department number: 300)
1FUNCTION Key
2
Proceed as Follows:
#Touch GENERAL FUNCTIONS.
$Touch 04 Set key operator code
button.
%Input ID Code (4 digits) and touch
the OK button.&Scroll to screen 03/09 and select 14
Dept. Counter mode.
(Touch the TOTAL COUNTER button to
display the sum of all the active
department counters.
NOTECTo reset the function mode, press the RESET button.
CContact your authorised servicing dealer to enable the Department Counter feature.
Function Setting for Key Operator
CTo clear the total counter, touch the
INPUT button, enter 0 and touch the
OK button.
CTo print the counter lists for each
department, touch the LIST PRINT
button.
Function
Press the FUNCTION Key.
P078-079_4510(pb).p657/31/02, 10:50 AM 78 
						

							79
Depar tment No.
(3 digits)
3
Change the Department Counter Number, ID Code and limit the
Maximum Number of Copies
Number of Department Counter
#Touch the DEPT. COUNTER button.
$Select the desired department using the scroll button.
%Input “0” to clear the counter.
&Touch the OK button.
Function
Counter (8 digits)
Depar tment No.
(3 digits)
Depar tment No.
(3 digits) Limit Number of Copies for Each Department
#Touch the MAX. COPIES button.
$Select the desired department using the scroll button.
%Input the maximum number of copies. (Max. 8 digits)
&Touch the OK button.
4
Exit function mode
#Touch the OK button.
$Press the RESET button on control panel. I.D Code Number for Each Department
#Touch the ID CODE button.
$Select the desired department using the scroll button.
%Input the ID Code number. (8 digits)
&Touch the OK button.
Making Copies
Maximum number of Copies (8 digits)
ID Code number (8 digits)
00112345678
00112345678
00112345678
P078-079_4510(pb).p657/31/02, 10:50 AM 79     
						

							80
B4·FLS

 

 


Weekly Timer
Key Operator can manage each on/off time in a week.
1FUNCTION Key
2
Proceed as Follows:
#Touch GENERAL FUNCTIONS.
$Select 04 Set key operator code button.
%Input ID Code (4 digits) and touch the OK button.
&Scroll to screen 05/09 and select 21 Weekly  timer.
NOTECTo reset the function mode, press the RESET or FUNCTION key.
Function Setting for Key Operator
Function
(Set the End and Start time using the keypad, then touch the OK button.
Press the FUNCTION Key.
P080-081_4510(pb).p657/31/02, 10:50 AM 80