Panasonic Digital Imaging System DP-3510/4510/6010 Copier & Network Scanner Operating Instructions

							111
Problem Solving
1
2
3
#Pull out the finisher.
$Pull out the trash box.
(See Page 87)
%Open the stapler cover.
(See Page 86)CMake sure that the misfeed indicator
resets after removing all misfed paper.
$
#
#
$

 

 


2-Bin Finisher (DA-FS330)
I
Upper Cover
Misfed Paper
Knob A
Misfed Paper
When paper cannot be removed:
4
$
#5
When the misfed paper is not found:
Knob B
#Close the staple cover and
install the trash box.
$Return the finisher to original
position.
6
Finisher Guide
P110-111_dp4510(pb).P657/31/02, 10:50 AM 111   
						

							112
Problem Solving
1
2
3
CMake sure that the misfeed indicator
resets after removing all misfed paper.

 

 


1-Bin Saddle-Stitch Finisher (DA-FS355)
Misfed Paper
Finisher
5
Return the finisher to original
position.
4
Upper Cover
Upper Cover
Removing a Misfed Paper
P112-113_dp4510(pb).P657/31/02, 10:50 AM 112   
						

							113
I
Problem Solving
1
2
3
CMake sure that the misfeed indicator
resets after removing all misfed paper.
5
Close the Finisher Front
Cover.

 

 


1-Bin Saddle-Stitch Finisher (DA-FS355)
4
Misfed Paper
Finisher Front Cover
Lower
Knob
Stitch Tray
6
7
Finisher
8
Inner Cover
Return the finisher to original
position.
9
Misfed Paper
P112-113_dp4510(pb).P657/31/02, 10:50 AM 113     
						

							114
Removing a Misfed Paper
1
2
3

Paper Transport  Area
Problem Solving
4
Transport Release Lever
Paper
Transport
Knob
Push and Turn
5
Ensure to close the Front
Cover.
1

Paper Entry Area
2
Right Cover
Misfed Paper
3
4
Push back the Paper Tray 1 or 2.
Close the Right Cover.5
P114_dp4510(pb).P657/31/02, 10:50 AM 114     
						

							115
I
1
2
3

Paper Exit/Fuser Area
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
Problem Solving
Front Cover
Exit Cover
Fuser Knob
4
Magnet
Heat Roller Cover
5
Ensure to close the Heat Roller
Cover, Exit Cover and the Front
cover.
Caution
heated
surface
6
1

Reverse Area
2
Left Cover
3
Close the Left Cover.
P115_dp4510(pb).P657/31/02, 10:50 AM 115     
						

							116
Removing a Misfed Paper
1
2
3

Automatic Duplex Unit (ADU)
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
Problem Solving
4
1
2
Transport Release Lever
Automatic Duplex Unit
Knob 5 (Centre)
5
6
2
1
Knob 5 (Right)
7
Push back the ADU into the copier.
Knob 5 (Left)
8Push and turn
9
Ensure to close the Front Cover.
P116_dp4510(pb).P657/31/02, 10:50 AM 116   
						

							117
I
Problem Solving
1
2

System Console
(DA-DS601/DS602)
3
4
Push back the Paper Tray 3 or 4.
Close the Right Cover Lower.
Right Cover Lower
Misfed Paper

 

 


Large Capacity Paper Tray
(DA-MA301)
1
#Hold the latch and slide the large
capacity paper tray to the right.
Misfed Paper
Latch
2
Misfed PaperDoor
#Close the door.
$Return the large capacity paper
tray to original position.
3
P117_dp4510(pb).P657/31/02, 10:50 AM 117   
						

							118
Problem Solving
1
2

i-ADF
CMake sure that the Misfeed Indicator
resets after removing all misfed paper.
3
ADF Cover
Inner CoverMisfed Paper
ADF Tray
4
P9250577
Green
Labelled Tab
Exit Guide
5
Misfed
Paper
6
Exit Guide
7
8
Close the ADF.
Misfed Paper
Removing a Misfed Paper
P118_dp4510(pb).P657/31/02, 10:51 AM 118   
						

							119
Troubleshooting
Before Calling Service
Check Action
Unit Does Not Operate
Does the display light?
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 56)Press Energy Saver key on the control
panel.
Perform actions in accordance with each
message. Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U9....etc.,)
Add Staples
(DA-FS600/FS605 : See page 85)
(DA-FS330 : See page 90)
(DA-FS355 : See page 94)
Remove all jammed staples.
(DA-FS600/FS605 : See page 87)
(DA-FS330 : See page 91)
(DA-FS355 : See page 95) Does the Add Staples indicator and
message appear on the display?
Add paper. (See page 105)
Remove the misfed paper. (See page 108) Does the paper misfeed indicator and
message appear on the display? (I)
Turn the Main Power Switch on the Back
and the Power Switch on the Left Side of
the machine to the OFF position, then back
ON  again. If the error code does not clear,
call your Service provider. Does E#-## indicator and message appear
on the display?
Does the Add Paper indicator and
message appear on the display? (J)
Others
Turn the Power Switch Off/On. The machine would not accept the next job
during operation, instructed job would not
be accepted for long time period or job
would not be completed.
Light Copies
Does the exposure indicator say
“LIGHTER”?Touch the “DARKER” button.
Does the Add Toner indicator and message
appear on the display? (?)Replace the Toner Bottle.
(See page 107)
P119_dp4510(pb).P657/31/02, 10:51 AM 119 
						

							120
Troubleshooting
Check Action
Marked Copies
Is the copier Platen Glass or Platen Sheet
dirty?Clean the Platen Glass or Sheet.
(See below)

If the measures outlined above do not solve the problem, call your Service provider.
Copier Care

 As a rule, clean weekly.
Platen Glass/Platen Sheet
#Wipe marks off with a cloth and a neutral
detergent.
$Wipe again with a dry cloth. Platen Sheet
Platen (glass) Is the original an OHP film or a dark
original?Cover the original with a sheet of white
paper before copying or lighten the
exposure setting.

 User Error Codes (U Code)
U1 Front Cover is open.
U18 Code Check Points Code
U4 Finisher is pull out. U20
U6 Right Cover is open.
U21
U7 Right Cover Lower is open.
U30
Total Copy Count is limit, consult your Key Operator. Check Points
ADF is open.
ADF is opened while scanning from ADF.
Punch Dust Cover is open.
U9 Left Cover is open.
U31
Paper is remained in the Saddle-Stitcher Unit.
U12Finisher Staple Cover/Upper Cover is open.
Trash Box is not installed. (DA-FS330)U32
Finsher  Infeed/Inner Cover is open. (DA-FS605/FS355)
U13 Low Toner.U33
Stapler of Saddle Stitcher Unit is incorrectly (DA-FS605/FS355)
U15 Call your Service provider.U34
Finisher Lower Front Cover is open. (DA-FS605)
U16 Call your Service provider.U35
Saddle Exit Cover is open. (DA-FS605)
U90Need to replace the battery.
Before Calling Service
P120_dp4510(pb).p657/31/02, 10:51 AM 120