Panasonic Digital Imaging System DP-3510/4510/6010 Copier & Network Scanner Operating Instructions

							51
Making Copies
3
#Adjust the density (transparency) of the
page being produced using the
LIGHTER and DARKER buttons.
$Touch the OK button.
6
#If you DO NOT want to store the overlay
image into memory for later use, touch
NO.
$If you DO want to store the overlay
image into memory for later use, touch
YES.
B4·FLS

Overlay
Overlays a second image onto the first by using a second original.
1st-page

 

 


Procedure
Select INSERTION/
OVERLAY Mode
4
Number of
Copies
5
Press
START
1
Place the
Originals
(Up to 70)
23
Select Overlay
Mode
OverlayInsertion/Overlay
NOTE
ATTENTIONCDo not turn Off the power switch if the file has been stored, otherwise the file
will be erased.
COnly A4 sized originals can be stored as a file.
CWhen storing the new file, new file will overwrites on the stored file.
CA registered file can be erased by File Edit mode. (See page 52)
CWhen selecting Overlay in 2-sided copy mode, the first page of the original
will be copied to 1-sided.
6
i-ADF
Face-Up
After the overlay
is copied, confirm
whether you want
to store it in the
machine
P050-051_4510(pb).p657/31/02, 10:45 AM 51 
						

							52
REGISTER*
#Touch each File Key then,
touch the REGISTER button.
$Set the registered density.
%Press Start.
&Touch the OK button to
confirm registration.
(Input the file name by using
the QWERTY keyboard then
touch the OK button.
Refer to entering the station
name of the Network
Scanner. (See page 98)
B4·FLS

File Edit
There are three File Edit available in the Form Overlay function.

 

 


Procedure
Select INSERTION/
OVERLAY Mode
(4)
Press START
(Register)
1
Place the
Original
(Register)
23
Select File Edit
mode and
desired function
File Edit Insertion/Overlay
ERASE
#Select the File Key to
erase.
$Touch the ERASE button.
%Touch the OK button.FILE NAME EDIT
#Select the File Key to edit.
$Touch the FILE NAME EDIT
button.
%Change the file name by using
the QWERTY keyboard then
touch the OK button.
Refer to entering the station
name of the Network Scanner.
(See page 98)
&Touch the OK button.
∗Up to 5 image files can be registered.  If the selected File Key already contains a
registered file image, the new image will over-write the current image.
CFunction to select the file is only available when the optional Hard Disk Drive
(DA-HD60) is installed.NOTE
Register: To Add a new fileErase: To Erase a registered
fileTitle Edit: To Change the title
of a file
File Key
P052-053_4510(pb).p657/31/02, 10:45 AM 52 
						

							53
3
Select Overlay file
#Select file in memory.
$Touch the OK button.
B4·FLS

Form Overlay
Overlay an image stored in memory onto the copier.
File

 

 


Procedure
Select INSERTION/
OVERLAY Mode
4
Number of
Copies
5
Press START
1
Place the
Original
23
Insertion/Overlay
CFunction to select the files is only available when the optional Hard Disk
Drive (DA-HD60) is installed.
When the optional Hard Disk Drive is not used, selectable file is only one file.
CWhen the image is not available in the memory to overlay, Form Overlay
function will not be selectable.
Making Copies
Form Overlay
NOTE
Select Form Overlay mode
P052-053_4510(pb).p657/31/02, 10:45 AM 53 
						

							54
NOTE
B4·FLS
Job Memory

 

 


Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later
time.
To store a job in memory
#Set up the copy job to be stored in memory,
by first selecting each function you wish the
copier to perform.
$Touch the JOB MEMORY button.
%Touch the Memory in button. ( )
&Touch the M1, M2, M3, M4 or M5 button.
To recall a job stored in memory
(Touch the JOB MEMORY button.
)Touch the M1, M2, M3, M4 or M5 button.
*Press START.
When touching the M1, M2, M3, M4, or M5 button, recalled job stored in memory will be display
at the job setting area.
CJOB MEMORY mode will not be deleted even if the power switches are turned Off.
CWhen storing a new job into a programmed memory location, the previously stored job
will be overwritten and erased.
CM1, M2 can use as manual skyshot mode by setting user function mode.
P054-055_4510(pb).p657/31/02, 10:45 AM 54 
						

							55
NOTE
B4·FLS
Concurrent Copying
Other Features

 

 


Concurrent Copying (Requires the optional Hard Disk Drive/DA-HD60 to
be installed)
Next copy job can be reserved even if the current copy job is not completed, as long as the
scanning was completed.
5
Press
START
2
Place the
Original
3
Select
Function
1
Touch RESERVE A
JOB button
4
Number
of Copies

 

 


Procedure
Making Copies
&Job set and press START. $Complete scanning of current copying.
%Touch Reserve a Job button. #Start Current copy.
CPrinting Jog Waiting List can be confirmed with Job Queue.
(See page 25)
CCompletion notice setting can be made with Completion Notice function.
(See page 26)
P054-055_4510(pb).p657/31/02, 10:45 AM 55 
						

							56
B4·FLS
Energy Saver/Interrupt
NOTE
ENERGY SAVER Key INTERRUPT Key

These modes can save power while the copier is not in use.
Energy Saver Mode
#To enter this mode.
Press the ENERGY SAVER key or the copier will automatically
enter the Energy Saver Mode after 15 minutes from the last copy.
The indicator will flash.
$To cancel this mode and make copies.
Press the ENERGY SAVER key again.
Sleep/Auto Off Mode*
#Automatically enters the Sleep/Auto Off Mode after 90 minutes
from the last copy. The copier power will drop and the indicator
will light.
$To make copies, press the ENERGY SAVER key.
Interrupt Mode
CThis mode can interrupt other copy jobs while making copies.
#Touch the INTERRUPT key, the indicator will light.
$Make another copy job.
%Touch the INTERRUPT key again to continue the original job.
CEnergy saver time (15 minutes) and Sleep/Auto Off time (90 minutes) can be changed
by the key operator. (See page 67)
CSleep Mode and Auto Off Mode can be selected by the key operator. (See page 70)
Other Features
Modes Power Consumption Warm Up Time
Normal Operation
Energy Saver Mode
Sleep ModeApproximately 240 Wh (6010)
Approximately 210 Wh (4510)
Approximately 160 Wh (3510)
Approximately 180 Wh (6010)
Approximately 170 Wh (4510)
Approximately 20 WhN/A
Min. 30 sec. recovery (6010/4510)
180 sec. recovery (6010/4510)
30 sec. recovery (3510)
ENERGY SAVER
INTERRUPT
Auto Off ModeApproximately 4 Wh(Approximately 3 Wh, for DP-3510 and except Europe)
180 sec. recovery (6010/4510)
30 sec. recovery (3510)
∗The machine will not go into Sleep Mode when the Weekly Timer is selected.
P056-057_4510(pb).p657/31/02, 10:45 AM 56 
						

							57
Making Copies
B4·FLS
NOTE
Other Features
Skyshot Mode

 

 


Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 72)

 

 


Digital Skyshot Mode
1
Place the Original on the platen
(Opening the Platen Cover/ADF)3
Press START
#Press the FUNCTION Key.
$Touch the COPIER SETTINGS button.
%Touch the [ button to advance to the 02/04 Display
Screen of Copier Settings menu.
&Touch the 06 Digital skyshot mode button.
(Select the desired function and touch the OK button.
06 Digital skyshot setting
No: None
Freeshp (Free shape): Copy is made with slant.
Parallel: Copy is made to parallel.
(within 5 degrees)
CAn incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
skyshot mode.
CAn incorrect position detection of the original may occur when a strong light
shines onto the glass during skyshot mode.
Select the Digital Skyshot Mode
The Digital Skyshot has been 2 modes (         or         ).
The default setting of Digital Skyshot Mode is “None”.
Before using this mode, select each setting by using the Function setting.
(2)
copycopy
copy
copy
P056-057_4510(pb).p657/31/02, 10:45 AM 57 
						

							58
B4·FLS
NOTE
Skyshot Mode
12
Place the
Original*Touch the JOB
MEMORY button
This setting should be carried out by a Key Operator.
#Select the COPIER SETTINGS in Function Setting
mode.
(See page 68)
$Touch the FG buttons to advance to the 04/04
Display Screen of Copier Settings menu.
%Touch the 19 Set key operator code button.
&Enter the Key Operator’s ID Code and then press
the OK button.
(Touch the FG buttons to advance to the 03/05
Display Screen.
)Select 12 M1, size and 13 M2, size and enter the
original’s size.
*Touch the OK button.
∗If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be
fed only 50 -105 g/m2 plain paper.
CWhen changing the M1 or M2 Size, consult with the key operator.
CWhen using the manual skyshot mode, the M1 and M2 are turned On and other job
memory cannot be used.
CTo reset the manual skyshot mode, press the RESET key.
Changing the default M1/M2 size
34
Number of
Copies
5
Press
START Select Custom
Size (M1 or M2)
2A3
C CC C
CSet 07 Manual Skyshot Mode in Copier Settings first. (See page 53)
Upper-
Left
Corner Platen

 

 


Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in advance.
Other Features
P058_4510(pb).p657/31/02, 10:45 AM 58 
						

							59
AAAAAAA✕bbbbbbbbbbbbbbb✕bbbbAAbbAbbAb
AAAAAAA✕✕bbbbbbbbb✕bbbb✕✕bbbbAbbAbbA✕
AAAAAAA✕✕bbbbbbbbb✕bbbb✕✕bbbAAbbAbbA✕
AAAAAAA✕bbbbbbbbbb✕bbb✕✕✕bAAAA✕✕AbbAb
AAAAAAA✕bbbbbbbbbb✕bbb✕✕✕bAAAA✕✕AbbAb
AAAAAAA✕bbbbbbbbbb✕b✕bb✕✕bAAAAbbAbbA✕
✕✕✕✕✕✕✕R✕bbbbbbbbb✕bbbb✕✕bAAAA✕✕AbbA✕ AAAAAAA✕b✕✕✕✕✕✕✕✕b✕b✕✕✕✕✕bAAAA✕✕AbbA✕
bAAbbbb✕Rbbbbbbbbb✕bbbb✕✕bAAAAbbAbbA✕
bbbbbbbbbAAAAAAAbbbbbbbbbbbbAbbbAbbAb
bbbbbbbbbAAAAAAAbbbbbbbbbbbbAbbbAbbAb
bbbbbbAbbAAAAAAA✕bbbbbbbbbbbAbbbAbbAb
bbbbbbAbbAAAAAAAbbbbbbbbbbbbAbbbAbbAb
bbbbbbAbbAAAAAAAbbbbbbbbbbAAAAbbAbbAb
bbbbbbAbbAAAAAAA✕b✕bbbb✕✕bAAAAbbAbbA✕
bbbbbbAbbAAAAAAAbbbbbbbbbbAAbAbbAbbbb
bbbbbbAbbbb✕bb✕bRbbbbbbbbbbbAAbbAbbAb
bbbbbbbbbbbbbbbbbAAbbbbbbbbbbbbbAbbAb
bAAAAAAAAbbbbb✕bbAA✕✕✕✕bbbAAAAAAAbbAb
bbbbbbbbbbbbbbbbbb✕AbbbA✕bbbbbbbAbbAb
bbbbb✕✕bbbbbbbbbbb✕bAbbA✕bbbbbbbAbbAb
bbbbbbbbbbbbbbbbbb✕bbAbA✕bbbbbbbAbbAb
bbb✕✕b✕bbbbbbbbbbb✕bbbAA✕bbbbbbbAbbA✕
AAAAAAAAAbbbbb✕bbbb✕✕✕✕RAbAAAAAAAbbAb
bAAAAAAAAbbbbb✕bbbb✕✕✕✕ARbAAAAAAAbbAb
bbbbbbbbbbbbbbbbbbbbbbbbbRbbbbbbAbbAb
bbb✕✕✕✕✕✕bbbb✕✕✕bb✕bbbb✕✕bAbAAbbAb✕A✕
bbb✕✕✕✕✕✕bbbb✕✕✕bb✕bbbb✕✕bbAAAbbAb✕A✕
✕b✕✕✕✕✕✕✕✕✕✕✕✕✕b✕b✕bbbb✕✕bAAAAbbAb✕A✕
✕✕✕✕✕✕✕✕✕bbbb✕✕✕bb✕bbbb✕✕bAAAAbbAb✕A✕
bbb✕✕b✕✕bbbbbbbbbb✕bbbb✕✕bbbbbAA✕b✕Ab
bbb✕✕b✕✕bbbbbbbbbb✕bbbb✕✕bbbbbAA✕b✕Ab
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb✕✕Rbb✕b
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbARAbb
bbbbbbbbbbbbbbbbbbbbbbbbbb✕✕✕✕✕✕A✕Abb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbA✕bbb
✕✕✕✕✕✕✕✕✕✕✕✕✕✕✕✕✕b✕bbbb✕✕b✕✕✕✕✕✕AbbA✕
b✕✕bb✕✕✕✕bbbbb✕bbbbbbb✕bbb✕✕✕✕bbAbbAA
Next
Selections2-SIDED/ORIG.
\ \\ \
\ COPY
SORT/
FINISHZOOM/
EFFECTSINSERTION/
OVERLAY
Cover
Combined Function Table
Stamping
Others
1 
\ \\ \
\ 2
2 
\ \\ \
\ 1
2 
\ \\ \
\ 2
Book 
\ \\ \
\ 2
2 Page
N in 1
Booklet
Staple-Sort
Shift-Group
Rotate-Group
Non-Sort
Punch
Zoom
Auto Zoom
Edge
Book
Margin
Stamping
Image Repeat
Centering
Inverse
Insertion
2-SIDED/ORIG.
\ \\ \
\ COPY
First
Selections
Rotate-Sort Multi-Size Feeding
SADF
Sort
Shift-Sort
SORT/
FINISH
INSERTION/OVERLAYZOOM/
EFFECTS
1 
\ \\ \
\ 2
2 
\ \\ \
\ 1
2 
\ \\ \
\ 2
Book 
\ \\ \
\ 2
2 Page
N in 1
Booklet
Multi-Size Feeding
SADF
Sort
Shift-Sort
Rotate-Sort
Staple-Sort
Shift-Group
Rotate-Group
Non-Sort
Punch
Zoom
Auto Zoom
Edge
Book
Margin
Image Repeat
Centering
Inverse
Cover
b
: Possible Combined Functions.
✕: Unavailable Combined Functions.
A : Next Selection is Carried Out.
R : When the same function is selected twice, the second selection is ignored.
Making Copies
Digital Skyshot OHP Interleaving
Presentation
Overlay
Form Overlay
Interrupt
Proof Copy
Tandem Copy
Manual Skyshot
Others
Proof Copy Insertion
OHP Interleaving
Presentation
Overlay
Form Overlay
Interrupt
Tandem Copy
Copy Reservation
Manual Skyshot
Digital Skyshot
P059_4510(pb).p657/31/02, 10:45 AM 59 
						

							60
B4·FLS
NOTE

 

 


ProcedureFUNCTION Key
RESET Key
#Press the FUNCTION Key.
$Select the COPIER SETTINGS in Function
Setting mode. (See page 62)
%Touch the [ button to advance to the 04/04
Display Screen of Copier Settings menu.
&Touch the 19 Set key operator code button.
(Enter the Key Operator’s ID Code and then
press the OK button.
)Follow the on screen instructions.
*After setting, touch the OK button on the
Display Panel.
+Press the RESET key, then exit the Function
mode.
CPlease refer to each operating instructions for options function settings.
Printer
Settings for
Key OperatorGeneral
Functions for
Key OperatorCopier
Settings for
Key OperatorFax/EMAIL
Settings for
Key Operator
Input Identification (Key Operator ID) Code
PRINTER
SETTINGS

 

 


Using Function Modes to change the Initial Copy Modes
GENERAL
FUNCTIONSCOPIER
SETTINGSFAX/EMAIL
SETTINGSCANNER
SETTINGS
Options
Function
P060-061_4510(pb).p657/31/02, 10:45 AM 60