Panasonic Dmc Fx150 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fx150 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61VQT1S88
Advanced (Recording pictures)
Using the [REC] Mode Menu
For details on [REC] mode menu settings, refer to P18.
Set the number of pixels. The higher the numbers of pixels, the finer the detail of the
pictures will appear even when they are printed onto large sheets.
Applicable modes:
񳲿
∫When the aspect ratio is [ X].¢ This item cannot be set in the Intelligent auto mode.
∫When the aspect ratio is [ Y].
∫ When the aspect ratio is [ W].
Note
•
“EZ” is an abbreviation of “Extended optical...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-60.png "Page 61
61VQT1S88
Advanced (Recording pictures)
Using the [REC] Mode Menu
For details on [REC] mode menu settings, refer to P18.
Set the number of pixels. The higher the numbers of pixels, the finer the detail of the
pictures will appear even when they are printed onto large sheets.
Applicable modes:
񳲿
∫When the aspect ratio is [ X].¢ This item cannot be set in the Intelligent auto mode.
∫When the aspect ratio is [ Y].
∫ When the aspect ratio is [ W].
Note
•
“EZ” is an abbreviation of “Extended optical...")
61VQT1S88 Advanced (Recording pictures) Using the [REC] Mode Menu For details on [REC] mode menu settings, refer to P18. Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. Applicable modes: ñ³²¿ ∫When the aspect ratio is [ X].¢ This item cannot be set in the Intelligent auto mode. ∫When the aspect ratio is [ Y]. ∫ When the aspect ratio is [ W]. Note • “EZ” is an abbreviation of “Extended optical...
Page 62
![Page 62
VQT1S8862
Advanced (Recording pictures)
•The extended optical zoom does not work in [TRANSFORM], [HIGH SENS.],
[HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or [FILM GRAIN] in scene mode so the
picture size for [ ] is not displayed.
•Pictures may appear mosaic depending on the subject and the recording conditions. •Refer to P119 for information about the number of recordable pictures.
For details on [REC] mode menu settings, refer to P18.
Set the compression rate at which the pictures are to be stored....](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-61.png "Page 62
VQT1S8862
Advanced (Recording pictures)
•The extended optical zoom does not work in [TRANSFORM], [HIGH SENS.],
[HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or [FILM GRAIN] in scene mode so the
picture size for [ ] is not displayed.
•Pictures may appear mosaic depending on the subject and the recording conditions. •Refer to P119 for information about the number of recordable pictures.
For details on [REC] mode menu settings, refer to P18.
Set the compression rate at which the pictures are to be stored....")
VQT1S8862 Advanced (Recording pictures) •The extended optical zoom does not work in [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or [FILM GRAIN] in scene mode so the picture size for [ ] is not displayed. •Pictures may appear mosaic depending on the subject and the recording conditions. •Refer to P119 for information about the number of recordable pictures. For details on [REC] mode menu settings, refer to P18. Set the compression rate at which the pictures are to be stored....
Page 63
![Page 63
63VQT1S88
Advanced (Recording pictures)
Note
•The ends of the recorded pictures may be cut at printing so check before printing. (P117)
For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
³
[OFF]/[ON]
Note
•
Depending on the brightness and how fast the subject is moving, jitter may not be...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-62.png "Page 63
63VQT1S88
Advanced (Recording pictures)
Note
•The ends of the recorded pictures may be cut at printing so check before printing. (P117)
For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
³
[OFF]/[ON]
Note
•
Depending on the brightness and how fast the subject is moving, jitter may not be...")
63VQT1S88 Advanced (Recording pictures) Note •The ends of the recorded pictures may be cut at printing so check before printing. (P117) For details on [REC] mode menu settings, refer to P18. The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimize the jitter of the subject. Applicable modes: ³ [OFF]/[ON] Note • Depending on the brightness and how fast the subject is moving, jitter may not be...
Page 64
![Page 64
VQT1S8864
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Most appropriate sensitivity within the range set will be set depending on the brightness of
the subject.
Applicable modes:
³²
[AUTO]/[200]/[400]/[800]/[1600]
•
The upper limit of the ISO sensitivity can be set.•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
•This will work when the [SENSITIVITY] is set to [AUTO] or when the...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-63.png "Page 64
VQT1S8864
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Most appropriate sensitivity within the range set will be set depending on the brightness of
the subject.
Applicable modes:
³²
[AUTO]/[200]/[400]/[800]/[1600]
•
The upper limit of the ISO sensitivity can be set.•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
•This will work when the [SENSITIVITY] is set to [AUTO] or when the...")
VQT1S8864 Advanced (Recording pictures) For details on [REC] mode menu settings, refer to P18. Most appropriate sensitivity within the range set will be set depending on the brightness of the subject. Applicable modes: ³² [AUTO]/[200]/[400]/[800]/[1600] • The upper limit of the ISO sensitivity can be set.•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise. Note •This will work when the [SENSITIVITY] is set to [AUTO] or when the...
Page 65
![Page 65
65VQT1S88
Advanced (Recording pictures)
∫Finely adjusting the white balance [ ]
You can finely adjust the white balance w hen you cannot acquire the desired hue by
setting the white balance.
•
It can be set from the quick menu (P19).
1Select [WHITE BALANCE] and then press 1
•Press 1 again if [ ], [ ] or [ ] is selected.
2Press 3/4 /2/1 to adjust the white balance and then press
[MENU/SET].
•
If you finely adjust the white balance to A (amber), the white balance icon on the LCD
monitor will change...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-64.png "Page 65
65VQT1S88
Advanced (Recording pictures)
∫Finely adjusting the white balance [ ]
You can finely adjust the white balance w hen you cannot acquire the desired hue by
setting the white balance.
•
It can be set from the quick menu (P19).
1Select [WHITE BALANCE] and then press 1
•Press 1 again if [ ], [ ] or [ ] is selected.
2Press 3/4 /2/1 to adjust the white balance and then press
[MENU/SET].
•
If you finely adjust the white balance to A (amber), the white balance icon on the LCD
monitor will change...")
65VQT1S88 Advanced (Recording pictures) ∫Finely adjusting the white balance [ ] You can finely adjust the white balance w hen you cannot acquire the desired hue by setting the white balance. • It can be set from the quick menu (P19). 1Select [WHITE BALANCE] and then press 1 •Press 1 again if [ ], [ ] or [ ] is selected. 2Press 3/4 /2/1 to adjust the white balance and then press [MENU/SET]. • If you finely adjust the white balance to A (amber), the white balance icon on the LCD monitor will change...
Page 66
![Page 66
VQT1S8866
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
³²n
Note
•When [ C] is selected and [AF MODE] is set to [š ], the camera will adjust the exposure to suit
the person’s face.
For details on [REC] mode menu settings, refer to P18.
This allows the focusing method that suits t he positions and number of the subjects to be
selected.
Applicable modes:
³²¿n
C [METERING MODE]
[C...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-65.png "Page 66
VQT1S8866
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
³²n
Note
•When [ C] is selected and [AF MODE] is set to [š ], the camera will adjust the exposure to suit
the person’s face.
For details on [REC] mode menu settings, refer to P18.
This allows the focusing method that suits t he positions and number of the subjects to be
selected.
Applicable modes:
³²¿n
C [METERING MODE]
[C...")
VQT1S8866 Advanced (Recording pictures) For details on [REC] mode menu settings, refer to P18. Type of optical measurement to measure brightness can be changed. Applicable modes: ³²n Note •When [ C] is selected and [AF MODE] is set to [š ], the camera will adjust the exposure to suit the person’s face. For details on [REC] mode menu settings, refer to P18. This allows the focusing method that suits t he positions and number of the subjects to be selected. Applicable modes: ³²¿n C [METERING MODE] [C...
Page 67
![Page 67
67VQT1S88
Advanced (Recording pictures)
Note
•The camera is focusing on all the AF areas when multiple AF areas (max. 5 areas) light at the
same time in [ ]. If you want to determine the focus position to take pictures, switch the AF
mode to [ ƒ], [Ø ] or [ Ù].
•If the AF mode is set to [ ], the AF area is not displayed until the picture is brought into focus.•Switch the AF mode to [ ƒ] or [ Ø] if it is difficult to focus using [Ù ].•The camera may detect the subjects other than a person as the face....](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-66.png "Page 67
67VQT1S88
Advanced (Recording pictures)
Note
•The camera is focusing on all the AF areas when multiple AF areas (max. 5 areas) light at the
same time in [ ]. If you want to determine the focus position to take pictures, switch the AF
mode to [ ƒ], [Ø ] or [ Ù].
•If the AF mode is set to [ ], the AF area is not displayed until the picture is brought into focus.•Switch the AF mode to [ ƒ] or [ Ø] if it is difficult to focus using [Ù ].•The camera may detect the subjects other than a person as the face....")
67VQT1S88 Advanced (Recording pictures) Note •The camera is focusing on all the AF areas when multiple AF areas (max. 5 areas) light at the same time in [ ]. If you want to determine the focus position to take pictures, switch the AF mode to [ ƒ], [Ø ] or [ Ù]. •If the AF mode is set to [ ], the AF area is not displayed until the picture is brought into focus.•Switch the AF mode to [ ƒ] or [ Ø] if it is difficult to focus using [Ù ].•The camera may detect the subjects other than a person as the face....
Page 68
VQT1S8868 Advanced (Recording pictures) Note •Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different subject depending on the recording conditions such as the ones below. –When the subject is too small–When the recording location is too dark–When the subject is moving too fast–When the background has the same or similar color to the subject.–When jitter is occurring–When using the zoom•If it fails to lock, AF area will flash in red, and disappear. Press 4...
Page 69
![Page 69
69VQT1S88
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
As long as the camera is held steady, the camera will automatically adjust the focus and
focus adjustment will then be quicker when the shutter is pressed. This is useful at times
when, for instance, you do not want to miss a picture-taking opportunity.
Applicable modes:
³²¿
[OFF]/[ON]
Note
•
When [ON] is set, [ ] is displayed on the screen.
For details on [REC] mode menu settings, refer to P18.
Pictures are...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-68.png "Page 69
69VQT1S88
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
As long as the camera is held steady, the camera will automatically adjust the focus and
focus adjustment will then be quicker when the shutter is pressed. This is useful at times
when, for instance, you do not want to miss a picture-taking opportunity.
Applicable modes:
³²¿
[OFF]/[ON]
Note
•
When [ON] is set, [ ] is displayed on the screen.
For details on [REC] mode menu settings, refer to P18.
Pictures are...")
69VQT1S88 Advanced (Recording pictures) For details on [REC] mode menu settings, refer to P18. As long as the camera is held steady, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter is pressed. This is useful at times when, for instance, you do not want to miss a picture-taking opportunity. Applicable modes: ³²¿ [OFF]/[ON] Note • When [ON] is set, [ ] is displayed on the screen. For details on [REC] mode menu settings, refer to P18. Pictures are...
Page 70
![Page 70
VQT1S8870
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
³²
[OFF]/[LOW]/[STANDARD]/[HIGH]Note
•
When it is set to [LOW], [STANDARD] or [HIGH], [ ] is displayed on the screen.•Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the...](http://img.usermanuals.tech/thumb/58/65642/w300_dmc-fx150_en_om_d-69.png "Page 70
VQT1S8870
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
³²
[OFF]/[LOW]/[STANDARD]/[HIGH]Note
•
When it is set to [LOW], [STANDARD] or [HIGH], [ ] is displayed on the screen.•Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the...")
VQT1S8870 Advanced (Recording pictures) For details on [REC] mode menu settings, refer to P18. Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see. Applicable modes: ³² [OFF]/[LOW]/[STANDARD]/[HIGH]Note • When it is set to [LOW], [STANDARD] or [HIGH], [ ] is displayed on the screen.•Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than [ISO100] if the...