Panasonic Dmc Fz1000 Owners Manual
Here you can view all the pages of manual Panasonic Dmc Fz1000 Owners Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71
3. Basic Operation
Press [DISP.] to switch the monitor screen.
•Screen will switch as follows:
¢ 1 If approximately 1 minute elapses without an operation being performed, part of the display
will disappear. Press [DISP.] to make the display reappear. This operation is to prevent
screen burn-in and is not a malfunction.
¢ 2 Not displayed while using the playback zoom or during motion picture playback, sequential
playback, panorama playback or a slide show.
¢ 3 This is displaye d if [Highlight]...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-70.png "Page 71
71
3. Basic Operation
Press [DISP.] to switch the monitor screen.
•Screen will switch as follows:
¢ 1 If approximately 1 minute elapses without an operation being performed, part of the display
will disappear. Press [DISP.] to make the display reappear. This operation is to prevent
screen burn-in and is not a malfunction.
¢ 2 Not displayed while using the playback zoom or during motion picture playback, sequential
playback, panorama playback or a slide show.
¢ 3 This is displaye d if [Highlight]...")
71 3. Basic Operation Press [DISP.] to switch the monitor screen. •Screen will switch as follows: ¢ 1 If approximately 1 minute elapses without an operation being performed, part of the display will disappear. Press [DISP.] to make the display reappear. This operation is to prevent screen burn-in and is not a malfunction. ¢ 2 Not displayed while using the playback zoom or during motion picture playback, sequential playback, panorama playback or a slide show. ¢ 3 This is displaye d if [Highlight]...
Page 72
![Page 72
3. Basic Operation
72
Displaying/not displaying white saturated areas
> [Custom] > [Highlight] > [ON]/[OFF]
When the Auto Review function is activated or when playing back, white saturated areas
appear blinking in black and white.
This does not affect the recorded image.
•
If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P159) referring to the histogram (P66) and
then taking the picture again. It may result in a better
quality picture.
•This does...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-71.png "Page 72
3. Basic Operation
72
Displaying/not displaying white saturated areas
> [Custom] > [Highlight] > [ON]/[OFF]
When the Auto Review function is activated or when playing back, white saturated areas
appear blinking in black and white.
This does not affect the recorded image.
•
If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P159) referring to the histogram (P66) and
then taking the picture again. It may result in a better
quality picture.
•This does...")
3. Basic Operation 72 Displaying/not displaying white saturated areas > [Custom] > [Highlight] > [ON]/[OFF] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. This does not affect the recorded image. • If there are any white saturated areas, we recommend compensating the exposure towards negative (P159) referring to the histogram (P66) and then taking the picture again. It may result in a better quality picture. •This does...
Page 73
![Page 73
73
3. Basic Operation
Deleting Pictures
Once deleted, pictures cannot be recovered.
•Pictures that are not in the DCF standard or those that are protected cannot be deleted.
1In Playback Mode, select the picture to delete
and then press [ ].
2Press 3 to select [Delete Single] and then
press [MENU/SET].
•Confirmation screen is displayed.
Picture is deleted by selecting [Yes].
To delete a single picture
•
[Delete Confirmation] in the [Playback] menu enables you to set which option on
the delete...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-72.png "Page 73
73
3. Basic Operation
Deleting Pictures
Once deleted, pictures cannot be recovered.
•Pictures that are not in the DCF standard or those that are protected cannot be deleted.
1In Playback Mode, select the picture to delete
and then press [ ].
2Press 3 to select [Delete Single] and then
press [MENU/SET].
•Confirmation screen is displayed.
Picture is deleted by selecting [Yes].
To delete a single picture
•
[Delete Confirmation] in the [Playback] menu enables you to set which option on
the delete...")
73 3. Basic Operation Deleting Pictures Once deleted, pictures cannot be recovered. •Pictures that are not in the DCF standard or those that are protected cannot be deleted. 1In Playback Mode, select the picture to delete and then press [ ]. 2Press 3 to select [Delete Single] and then press [MENU/SET]. •Confirmation screen is displayed. Picture is deleted by selecting [Yes]. To delete a single picture • [Delete Confirmation] in the [Playback] menu enables you to set which option on the delete...
Page 74
![Page 74
3. Basic Operation
74
¢ Picture groups are treated as a single picture.
(All the pictures in the selected picture group will be deleted.)
1In Playback Mode, press [ ].
2Press 3/4 to select [Delete Multi] or [Delete All] and then press
[MENU/SET].
•[Delete All] > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
•It is possible to delete all pictures except the ones set as favorite when [All Delete
Except Favorite] is selected with the [Delete All] set.
3(When [Delete Multi]...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-73.png "Page 74
3. Basic Operation
74
¢ Picture groups are treated as a single picture.
(All the pictures in the selected picture group will be deleted.)
1In Playback Mode, press [ ].
2Press 3/4 to select [Delete Multi] or [Delete All] and then press
[MENU/SET].
•[Delete All] > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
•It is possible to delete all pictures except the ones set as favorite when [All Delete
Except Favorite] is selected with the [Delete All] set.
3(When [Delete Multi]...")
3. Basic Operation 74 ¢ Picture groups are treated as a single picture. (All the pictures in the selected picture group will be deleted.) 1In Playback Mode, press [ ]. 2Press 3/4 to select [Delete Multi] or [Delete All] and then press [MENU/SET]. •[Delete All] > Confirmation screen is displayed. Pictures are deleted by selecting [Yes]. •It is possible to delete all pictures except the ones set as favorite when [All Delete Except Favorite] is selected with the [Delete All] set. 3(When [Delete Multi]...
Page 75
![Page 75
75
4.Recording Modes
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
When you wish to leave settings to the camera and record without thinking about them,
use Intelligent Auto Plus Mode or Intelligent Auto Mode, which makes optimal settings for
the subject and scene.
•
Functions that can be set differ between Intelligent Auto Plus Mode and Intelligent Auto Mode.
( ± : possible, —: not possible)
1Set the mode dial to [¦].
•The camera will switch to either the most...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-74.png "Page 75
75
4.Recording Modes
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
When you wish to leave settings to the camera and record without thinking about them,
use Intelligent Auto Plus Mode or Intelligent Auto Mode, which makes optimal settings for
the subject and scene.
•
Functions that can be set differ between Intelligent Auto Plus Mode and Intelligent Auto Mode.
( ± : possible, —: not possible)
1Set the mode dial to [¦].
•The camera will switch to either the most...")
75 4.Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) Recording Mode: When you wish to leave settings to the camera and record without thinking about them, use Intelligent Auto Plus Mode or Intelligent Auto Mode, which makes optimal settings for the subject and scene. • Functions that can be set differ between Intelligent Auto Plus Mode and Intelligent Auto Mode. ( ± : possible, —: not possible) 1Set the mode dial to [¦]. •The camera will switch to either the most...
Page 76
![Page 76
4. Recording Modes
76
∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode1Press [MENU/SET].
•Press 2, and press 3/4 to select [ ] or [ ].
2Press 2/1 to select [ ] or [ ] and then press
[MENU/SET].
•
Press [DISP.] to display the description of the selected
mode.
∫ Scene Detection
When taking pictures
¢ 1 Only displayed when the built-in flash is open.
¢ 2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P80)
¢ 3 When [Face Recog.] is set to [ON], [ ] will be...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-75.png "Page 76
4. Recording Modes
76
∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode1Press [MENU/SET].
•Press 2, and press 3/4 to select [ ] or [ ].
2Press 2/1 to select [ ] or [ ] and then press
[MENU/SET].
•
Press [DISP.] to display the description of the selected
mode.
∫ Scene Detection
When taking pictures
¢ 1 Only displayed when the built-in flash is open.
¢ 2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P80)
¢ 3 When [Face Recog.] is set to [ON], [ ] will be...")
4. Recording Modes 76 ∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode1Press [MENU/SET]. •Press 2, and press 3/4 to select [ ] or [ ]. 2Press 2/1 to select [ ] or [ ] and then press [MENU/SET]. • Press [DISP.] to display the description of the selected mode. ∫ Scene Detection When taking pictures ¢ 1 Only displayed when the built-in flash is open. ¢ 2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P80) ¢ 3 When [Face Recog.] is set to [ON], [ ] will be...
Page 77
![Page 77
77
4. Recording Modes
When recording motion pictures
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.
•When [ ], [ ], or [ ] is set, an eye closer to the camera will be in focus, while the exposure
will be optimized for the face. In Intelligent Auto Plus Mode or Intelligent Auto Mode, you cannot
change the eye in focus. ([Face/Eye Detection])
•If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the scene detection has...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-76.png "Page 77
77
4. Recording Modes
When recording motion pictures
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.
•When [ ], [ ], or [ ] is set, an eye closer to the camera will be in focus, while the exposure
will be optimized for the face. In Intelligent Auto Plus Mode or Intelligent Auto Mode, you cannot
change the eye in focus. ([Face/Eye Detection])
•If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the scene detection has...")
77 4. Recording Modes When recording motion pictures • [¦] is set if none of the scenes are applicable, and the standard settings are set. •When [ ], [ ], or [ ] is set, an eye closer to the camera will be in focus, while the exposure will be optimized for the face. In Intelligent Auto Plus Mode or Intelligent Auto Mode, you cannot change the eye in focus. ([Face/Eye Detection]) •If a tripod is used, for instance, and the camera has judged that camera shake is minimal when the scene detection has...
Page 78
![Page 78
4. Recording Modes
78
∫ Functions that work automatically
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
–Scene Detection–Backlight Compensation–[Face/Eye Detection]
–Auto White Balance–Intelligent ISO sensitivity control–[Red-Eye Removal]
–[i.Resolution]–[i.Dynamic]–[Long Shtr NR]
–[Quick AF]–[AF Assist Lamp]–[Level Shot]](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-77.png "Page 78
4. Recording Modes
78
∫ Functions that work automatically
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
–Scene Detection–Backlight Compensation–[Face/Eye Detection]
–Auto White Balance–Intelligent ISO sensitivity control–[Red-Eye Removal]
–[i.Resolution]–[i.Dynamic]–[Long Shtr NR]
–[Quick AF]–[AF Assist Lamp]–[Level Shot]")
4. Recording Modes 78 ∫ Functions that work automatically • The following functions are performed automatically to allow the camera to make the optimal settings. –Scene Detection–Backlight Compensation–[Face/Eye Detection] –Auto White Balance–Intelligent ISO sensitivity control–[Red-Eye Removal] –[i.Resolution]–[i.Dynamic]–[Long Shtr NR] –[Quick AF]–[AF Assist Lamp]–[Level Shot]
Page 79
![Page 79
79
4. Recording Modes
∫ Menus that can be set
Only the following menus can be set.
Intelligent Auto Plus Mode
MenuItem
[Rec] [Photo Style]/[Aspect Ratio]/[Picture Size]/[Quality]/[AFS/AFF]/[Burst Rate]/
[Auto Bracket]/[Self Timer]/[Time Lapse/Animation]/[iHandheld Night Shot]/
[iHDR]/[Shutter Type]/[Color Space]/[Stabilizer]/[Face Recog.]/[Profile Setup]
[Motion
Picture] [Photo Style]/[Rec Format]/[Rec Quality]/[AFS/AFF]/[Continuous AF]/[Mic
Level Disp.]/[Mic Level Adj.]/[Special Mic.]/
[Mic Level...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-78.png "Page 79
79
4. Recording Modes
∫ Menus that can be set
Only the following menus can be set.
Intelligent Auto Plus Mode
MenuItem
[Rec] [Photo Style]/[Aspect Ratio]/[Picture Size]/[Quality]/[AFS/AFF]/[Burst Rate]/
[Auto Bracket]/[Self Timer]/[Time Lapse/Animation]/[iHandheld Night Shot]/
[iHDR]/[Shutter Type]/[Color Space]/[Stabilizer]/[Face Recog.]/[Profile Setup]
[Motion
Picture] [Photo Style]/[Rec Format]/[Rec Quality]/[AFS/AFF]/[Continuous AF]/[Mic
Level Disp.]/[Mic Level Adj.]/[Special Mic.]/
[Mic Level...")
79 4. Recording Modes ∫ Menus that can be set Only the following menus can be set. Intelligent Auto Plus Mode MenuItem [Rec] [Photo Style]/[Aspect Ratio]/[Picture Size]/[Quality]/[AFS/AFF]/[Burst Rate]/ [Auto Bracket]/[Self Timer]/[Time Lapse/Animation]/[iHandheld Night Shot]/ [iHDR]/[Shutter Type]/[Color Space]/[Stabilizer]/[Face Recog.]/[Profile Setup] [Motion Picture] [Photo Style]/[Rec Format]/[Rec Quality]/[AFS/AFF]/[Continuous AF]/[Mic Level Disp.]/[Mic Level Adj.]/[Special Mic.]/ [Mic Level...
Page 80
![Page 80
4. Recording Modes
80
Recording Mode:
When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld
night shots, pictures of the night scenery will be taken at a high burst speed and composed
into a single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise,
without using a tripod.
•
The angle of view will be slightly narrower.•A message notifying that multiple pictures will be taken is displayed. Do not move the camera
during...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-79.png "Page 80
4. Recording Modes
80
Recording Mode:
When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld
night shots, pictures of the night scenery will be taken at a high burst speed and composed
into a single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise,
without using a tripod.
•
The angle of view will be slightly narrower.•A message notifying that multiple pictures will be taken is displayed. Do not move the camera
during...")
4. Recording Modes 80 Recording Mode: When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld night shots, pictures of the night scenery will be taken at a high burst speed and composed into a single picture. This mode is useful if you want to take stunning night shots with minimal jitter and noise, without using a tripod. • The angle of view will be slightly narrower.•A message notifying that multiple pictures will be taken is displayed. Do not move the camera during...