Panasonic Dmc Fz150 Owners Manual

- 51 -
Basic
•The number of days that have passed since the departure date can be printed out using the 
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. 
If you set [WORLD TIME] to the travel destination, the travel date is calculated using the date in 
the clock setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.•The number of days...

Basic
- 52 -
•When you connect the camera to a TV, the volume of the TV speakers does not change.
•Refer to P100 for details.
•Refer to P108 for details about the [REC] Mode menu.
•The focus cannot be slightly adjusted with AF locked when recording motion pictures in 
Intelligent Auto Mode.
•It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when the 
viewfinder is in use.
•Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However, 
this...

- 53 -
Basic
•The brightness of the pictures displayed on the LCD monitor is increased so some subjects 
may appear differently from actuality on the LCD monitor. However, this does not affect the 
recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording 
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•The number of recordable pictures decreases in [LCD MODE].
•When you align the subject on the horizontal and vertical...

Basic
- 54 -
•When the recorded picture and the histogram do not match each other under the 
following conditions, the histogram is displayed in orange.
–When the Manual Exposure Assistance is other than [ n0 EV] during exposure compensation 
or in the Manual Exposure Mode
–When the flash is activated–In [STARRY SKY] or [FIREWORKS] in Scene Mode–When the flash is closed•When the brightness of the screen is not correctly displayed in dark places•When the exposure is not adequately adjusted•The histogram...

- 55 -
Basic
•MF position will be memorized in the following cases:–Turning the camera off–When switching to a type of focus other than Manual Focus–When switched to Playback Mode•Zoom position will be set all the way to wide when the [ZOOM RESUME] is set to [OFF].•When [MF RESUME] is set to [OFF], MF position will be the distance focused at the time of 
recording in Manual Focus.
•Depending on the recording conditions, the memorized MF positions and resumed MF 
positions might be different.
[REMAINING...

Basic
- 56 -
•Refer to P74 for details.
•Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].•[SLEEP MODE]  is set to  [5 MIN. ]  in the Intelligent Auto Mode.•[SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].•Press any button to turn on the LCD monitor again.•[SLEEP MODE] does not work in the following cases.–When using the AC adaptor–When connecting to a PC or a printer–When recording or playing back motion pictures–During a slide...

- 57 -
Basic
•[AUTO REVIEW] is activated regardless of its setting in the following cases.–When using Auto Bracket–[HANDHELD NITE SHOT] in [NIGHT PORTRAIT]–[FLASH BURST] in Scene Mode–During the Burst Mode•In Intelligent Auto Mode or [PHOTO FRAME] in  Scene Mode, the Auto Review function is fixed 
to [2SEC.].
•[AUTO REVIEW] does not work when recording motion pictures.
•The folder number is updated and the file number starts from 0001.•A folder number between 100 and 999 can be assigned.
When the folder...

Basic
- 58 -
•When the [RESET] setting is selected during recording, the operation that resets the lens is 
also performed at the same time. You will hear the sound of the lens operating but this is 
normal and not indicative of malfunctioning.
•When the Recording Mode settings are reset, data registered with [FACE RECOG.] will be also 
reset, too.
•When [SETUP] menu settings are reset, the following settings are also reset. In addition, 
[ROTATE DISP.] is set to [ON].
–The birthday and name settings for...

- 59 -
Basic
•If the images are not output on the TV when the setting is [AUTO], match with the image format 
your TV can display, and select number of effective scanning lines. (Please read the operating 
instructions for the TV.)
•This will work when the HDMI mini cable (optional) is connected.
•This will work when the HDMI mini cable (optional) is connected.•Refer to P158 for details.
[HDMI MODE]
Set the format for the HDMI output when playing back on the 
HDMI compatible high definition TV connected...

Basic
- 60 -
•This will work when the HDMI mini cable (optional) is connected.•Refer to P160 for the method to playback 3D pictures in 3D.
•Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not 
turn the camera off during formatting.
•If a card has been inserted, only the card is formatted. To format the built-in memory, remove 
the card.
•If the card has been formatted on a PC or other equipment, format it on the camera again.•It may take longer to format the...