Panasonic Dmc Fz2500 Operating Instructions Manual

271
10. Using the Wi-Fi function
Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap 
Movie] function  (P165). Music can be added to motion pictures to be combined. In 
addition, you can save 
the combined motion picture or upload it on a web service.
A Record motion pictures with [Snap Movie].
B Send the recorded motion pictures.
C Edit the motion pictures.
D Combine the motion pictures, save the combined motion picture,  and send it to a web 
service.
E Combine the...

10. Using the Wi-Fi function
272
Displaying pictures on a TV
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)
3Select a device you want to connect.• When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.• To terminate the connection, follow the steps below:
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [Yes]
(You can also terminate the connection by pressing [Wi-Fi].  (P261))
You can display pictures on a TV that supports the...

273
10. Using the Wi-Fi function
Sending images
When sending images, select the method for sending them after selecting [New 
Connection].
After the connection has been completed, settings for sending,  such as the image size for 
sending, can also be changed.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if th e file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3...

10. Using the Wi-Fi function
274
A picture can be automatically sent to a specified device every time you take it.• When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
• To terminate the connection, follow the steps below:
>   [Setup]  > [Wi-Fi] > [Wi-Fi Function]  > [Yes]
• You can terminate the connection or change the send settings  by pressing [Wi-Fi].  (P261)
You cannot change the settings while sending pictures....

275
10. Using the Wi-Fi function
Pressing [DISP.] after completing a connection allows you to change the settings for 
sending such as the image size for sending.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when the destination is set to [PC].
¢ 3 Only available when the destination is set to [Cloud Sync. Ser vice] or [Web service].
¢ 4 Only available when the destination is set to [Cloud Sync. Ser vice].
• Details of the playback menu [Favorite] or [Print Set]...

10. Using the Wi-Fi function
276
Sending images to a smartphone/tablet
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)
Preparations
• Install the “ Image App ” in advance. (P262)
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and...

277
10. Using the Wi-Fi function
3Select a device you want to connect.4Check the send settings, and select [Set].• To change the send setting, press [DISP.]. (P275)
5When [Send Images While Recording] has been selected
Take pictures. (P274)
When [Send Images Stored in the Camera] has been selected
Select the picture.  (P274) 

10. Using the Wi-Fi function
278
Printing Wirelessly
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)3Select a printer you want to connect.4Select pictures, and then print.• The procedure for selecting pictures is the same as the one fo r when the USB connection 
cable is connected.  (P310)
• To terminate the connection, press [ ]. (You can also terminate the connection by pressing [Wi-Fi].  (P261))
You can send images to a compatible printer, and print 
them wirelessly....

279
10. Using the Wi-Fi function
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV 
devices).
1Select the menu.  (P51)
2Select [Via Network] or [Direct], and connect.  (P290)3Select a device you want to connect.
4Check the send settings, and select [Set].• To change the send setting, press [DISP.]. (P275)
A
Wireless access point BHome AV device
Preparations
When sending a picture to AV devices, set your device to DLNA w aiting mode.
• Read the...

10. Using the Wi-Fi function
280
When sending images to PC
• Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attemp t to create a receive folder 
may fail if the account includes non-alphanumeric characters.
∫ When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.  (P304)2Create a folder that receives images with “ PHOTOfunSTUDIO ”.• To create the folder automatically, select [Auto-create]. To s...