Panasonic Dmc Fz2500 Operating Instructions Manual

							271
10. Using the Wi-Fi function
Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap 
Movie] function  (P165). Music can be added to motion pictures to be combined. In 
addition, you can save 
the combined motion picture or upload it on a web service.
A Record motion pictures with [Snap Movie].
B Send the recorded motion pictures.
C Edit the motion pictures.
D Combine the motion pictures, save the combined motion picture,  and send it to a web 
service.
E Combine the motion pictures, and save the combined motion pictu re.
∫Combining motion pictures by operating a smartphone1Connect to a smartphone.  (P263)
2Operate the smartphone.
Combining motion pictures recorded with Snap Movie according to  
your preference on a smartphone/tablet
1 Select  [ ].
2 Select [Snap Movie].
• [Snap Movie] motion pictures with recent recording dates will be selected and 
automatically sent to the smartphone.
• When motion pictures with recent recording dates are not avail able, a screen that 
lets you select motion pictures will be displayed. Select motio n pictures and send 
them.
3 Edit the motion pictures.
• Operate the smartphone to edit the motion pictures, such as re arranging them, 
deleting those that are unnecessary or adding music to them.
• You can combine the edited motion pictures and save the combin ed file on the 
smartphone or upload it on a web service.
• Read the [Help] in the “ Image App ” menu for further details on  how to operate.
• [Snap Movie] of the “ Image App ” requires a smartphone that sup ports Android OS 4.3 or 
higher.
• The iPhone 4 does not support [Snap Movie] of the “ Image App ”.
  

 
						

							10. Using the Wi-Fi function
272
Displaying pictures on a TV
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)
3Select a device you want to connect.• When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.• To terminate the connection, follow the steps below:
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [Yes]
(You can also terminate the connection by pressing [Wi-Fi].  (P261))
You can display pictures on a TV that supports the 
Digital Media Renderer (DMR) function of the DLNA 
standard.
Preparations
Set the TV to DLNA waiting mode.
• Read the operating instructions for your TV.
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Playback on TV]
• If you display pictures using the Wi-Fi function, they cannot  be output in 4K resolution. To 
output them in 4K resolution, connect the camera and the TV wit h an HDMI micro cable. 
(P300)
• When a TV is connected to this unit, the TV screen may temporarily return to the status before  the connection. Pictures are displayed again when you take or p lay back pictures.
• [Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
• Motion pictures and 4K burst files cannot be played back.
• During Multi Playback, Calendar Playback or when selecting the  focus area of an image 
recorded with [Post Focus], images displayed on the camera are  not displayed on the TV.
MENU
MENU 
						

							273
10. Using the Wi-Fi function
Sending images
When sending images, select the method for sending them after selecting [New 
Connection].
After the connection has been completed, settings for sending,  such as the image size for 
sending, can also be changed.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if th e file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3 Excluding motion pictures recorded with their size set to [4K]  in [Rec Quality]
• Some images may not be played back or sent depending on the de vice.
• Refer to the manual of the destination equipment or the web se rvice for more information on 
how to playback pictures.
DestinationJPEGRAWMP4¢ 1AVCHD¢1, 2MP4
(LPCM)MOV4K Burst File¢ 1
Pictures recorded in 
[Post Focus]¢1
[Smartphone]  (P276)±—±¢3——— —
[PC] (P280) ±±± ± ±¢1±¢1±
[Cloud Sync. Service]  (P285) ±
—±
¢3——— —
[Web service] (P282) ±—±
¢3——— —
[AV device] (P279) ±—— — — — —
[Printer]
¢ 1 (P278) ±—— — — — — 
						

							10. Using the Wi-Fi function
274
A picture can be automatically sent to a specified device every time you take it.• When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
• To terminate the connection, follow the steps below:
>   [Setup]  > [Wi-Fi] > [Wi-Fi Function]  > [Yes]
• You can terminate the connection or change the send settings  by pressing [Wi-Fi].  (P261)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
Images can be selected and sent after recording.
∫How to select an image(s) after selecting [Single Select] or [M ulti Select] 
Send Images While Recording
• Since the camera gives priority to recording, sending may take longer during the recording.
• If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will 
not be resent.
• You may not be able to delete files or use the playback menu w hile sending.
Not available in these cases:
• You cannot send motion pictures, 4K burst files and images recorded with the Post Focus 
function.
Send Images Stored in the Camera
[Single Select] setting
1Select the picture.2Select [Set].
[Multi Select] setting
1Select the picture.  (repeat)• The setting is canceled when the picture is selected 
again.
2Select [OK].• The number of pictures that can be sent by [Multi Select] is limited.
• To change the send settings on a screen that is displayed after the image has been sent, 
press [DISP.]. To terminate the connection, select [Exit].
55MENU
6HW
2. 
						

							275
10. Using the Wi-Fi function
Pressing [DISP.] after completing a connection allows you to change the settings for 
sending such as the image size for sending.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when the destination is set to [PC].
¢ 3 Only available when the destination is set to [Cloud Sync. Ser vice] or [Web service].
¢ 4 Only available when the destination is set to [Cloud Sync. Ser vice].
• Details of the playback menu [Favorite] or [Print Set] settings will not be sent.
Not available in these cases:
• Some images taken with a different camera may not be able to be sent.
• Images that have been modified or edited with a computer may n ot be able to be sent.
Changing the settings for sending images
[Size]Resize the image to send.
[Original]/[Auto]
¢
1/[Change]
• If you select [Auto], the image size is determined by the  circumstances at the destination.
• You can select the image size for [Change ] from [M], [S] or [VGA].
The aspect ratio does not change.
[File Format]¢ 2[JPG]/[RAW iJPG]/[RAW]
[Delete Location 
Data]¢3
Select whether to delete the location information from images b efore 
sending them.
[ON]: Delete the location information, then send.
[OFF]: Keep the location information and send.
• This operation only deletes the location information from the  images 
that are set to be sent.
(The location information will not be deleted from the original  images 
stored in this unit.)
[Cloud Limit]¢ 4
You can select whether to send images when the Cloud Folder run s 
out of free space.
[ON]: Do not send images.
[OFF]: Delete images from the oldest ones, then send new images. 
						

							10. Using the Wi-Fi function
276
Sending images to a smartphone/tablet
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)
Preparations
• Install the “ Image App ” in advance. (P262)
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and se t.
3 Start “ Image App ”.  (P262)
When connecting with [WPS Connection]¢ in [Direct]:
1 Start “ Image App ”.  (P262)
¢WPS is a function that allows you to easily set up a connection  with a wireless LAN 
device and make security-related settings. To check whether you r smartphone 
supports the function, refer to the operating instructions of t he smartphone.
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of  this unit.
3 Start “ Image App ”.  (P262)
MENU 
						

							277
10. Using the Wi-Fi function
3Select a device you want to connect.4Check the send settings, and select [Set].• To change the send setting, press [DISP.]. (P275)
5When [Send Images While Recording] has been selected
Take pictures. (P274)
When [Send Images Stored in the Camera] has been selected
Select the picture.  (P274) 
						

							10. Using the Wi-Fi function
278
Printing Wirelessly
1Select the menu. (P51)
2Select [Via Network] or [Direct], and connect.  (P290)3Select a printer you want to connect.4Select pictures, and then print.• The procedure for selecting pictures is the same as the one fo r when the USB connection 
cable is connected.  (P310)
• To terminate the connection, press [ ]. (You can also terminate the connection by pressing [Wi-Fi].  (P261))
You can send images to a compatible printer, and print 
them wirelessly.
Preparations
To print out recorded pictures wirelessly, you must use a print er that supports PictBridge 
(wireless LAN)
¢.¢ Compliant with the DPS over IP standards.
• For details on the PictBridge (wireless LAN-compatible) printe r, contact the respective 
company.
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images Stored in the Camera]  > [Printer]
Not available in these cases:
• Motion pictures, 4K burst files, and pictures recorded with [P ost Focus] cannot be printed.
MENU 
						

							279
10. Using the Wi-Fi function
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV 
devices).
1Select the menu.  (P51)
2Select [Via Network] or [Direct], and connect.  (P290)3Select a device you want to connect.
4Check the send settings, and select [Set].• To change the send setting, press [DISP.]. (P275)
A
Wireless access point BHome AV device
Preparations
When sending a picture to AV devices, set your device to DLNA w aiting mode.
• Read the operating instructions of your device for details.
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[AV device]
5When [Send Images While Recording] has been selected
Take pictures.  (P274)
When [Send Images Stored in the Camera] has been selected
Select the picture.  (P274)
• Sending may fail depending on the operational status of the AV  device. Also, sending may 
take a while.
MENU 
						

							10. Using the Wi-Fi function
280
When sending images to PC
• Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attemp t to create a receive folder 
may fail if the account includes non-alphanumeric characters.
∫ When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.  (P304)2Create a folder that receives images with “ PHOTOfunSTUDIO ”.• To create the folder automatically, select [Auto-create]. To s pecify a folder, create a new 
folder, or set a password to the folder, select [Create manuall y].
• For details, refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
∫ When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows 7/Windows 8/Windows 8.1/Windows 10
Example: Windows 7
1Select a folder you intend to use for receiving, then right-cli ck.2Select [Properties], then enable sharing of the folder.• For details, refer to the operating instructions of your PC or Help on the OS.
You can send pictures and motion pictures recorded 
with this unit to a PC.
Preparations
(On the camera)
• If the workgroup of the destination PC has 
been changed from the standard setting, you 
also need to change the setting of this unit in 
[PC Connection].  (P296)(On your PC)• Turn the computer on.
• Prepare folders for receiving images on the 
PC before sending a picture to the PC. 
(P280)
To create a folder that receives images