Panasonic Dmc G10k Operating Instructions Manual

101VQT2S62
Advanced (Recording pictures)
∫About the Flicker Reduction Function
If there is marked flicker or striping when recording motion pictures, the Flicker Reduction 
Function can be set to [ON].
1Press [ ‚].
•The Flicker Reduction Function will be forcefully activated, and the shutter speed will be 
adjusted to 1/100.
2Rotate the rear dial.
•It is possible to select the shutter speed to adjust from 1/50, 1/60, 1/100, or 1/120, and 
adjust to the optimal setting while viewing the screen.
•When...

VQT2S62102
Advanced (Recording pictures)
Press 3/4 to select the item and then press [MENU/SET].
¢This item cannot be set in the Intelligent Auto Mode.•[ ] can be enjoyed on the TV as high quality motion picture by using the HDMI mini 
cable (optional). For details, see “Playing back on the TV with HDMI socket” on P147.
Press [MENU/SET] to close the menu.
•You can also press the shutter button halfway to close the menu.
Note
•Refer to P122 for the [MOTION PICTURE] Mode menu.•The flash setting is fixed to...

103VQT2S62
Advanced (Recording pictures)
•It is recommended to use a fully charged battery or AC adaptor (P161) when recording motion 
pictures.
•If while recording motion pictures using the AC adaptor (P161) the power supply is cut off due 
to a power cut or if the AC adaptor is disconnected etc., the motion picture being recorded will 
not be recorded.
•Color or brightness of the screen may change or horizontal streaks may appear on the screen 
when the picture is taken under extremely bright light, or...

VQT2S62104
Advanced (Recording pictures)
[REC] Mode: 
Taking a Picture with Face Recognition Function
Face Recognition is a function which finds a face resembling a registered face and 
prioritizes focus and exposure automatically. Even if the person is located towards the 
back or on the end of a line in a group photo, the camera can still take a clear picture.
•
The Face Recognition function includes the following.In Recording Mode
–Display of corresponding name when camera detects a registered 
face¢...

105VQT2S62
Advanced (Recording pictures)
You can register information such as names and birthdays for face images of up to 6 
people.
Registration can be facilitated by taking multiple face images of each person. (up to 3 
pictures/registration)
Face Settings
∫Point of recording when registering the face images
•
Face front with eyes open and mouth closed, making sure the 
outline of the face, the eyes, or the eyebrows are not covered 
with the hair when registering.
•Make sure there is no extreme...

VQT2S62106
Advanced (Recording pictures)
Select [FACE RECOG.] on the [REC] Mode menu and then press 1. 
(P28)
Press 3
/4 to select [MEMORY] and then press [MENU/SET].
Press 3/ 4/2/1 to select the face 
recognition frame that is not registered, 
and then press [MENU/SET].
Take the picture adjusting the face with 
the guide.
•The faces of subjects other than people (pets, etc.) 
cannot be registered.
•When recognition fails, a message will appear and 
the display will return to the recording screen. In...

107VQT2S62
Advanced (Recording pictures)
Select item to edit with 3/4, and then press  1.
•You can register up to 3 face images.
Press the shutter button halfway to close the menu.
∫About the information 
•When [DISPLAY] is pressed on the recording screen described in step 4 on P106, an 
explanation appears for taking face images. (Press again to return to the recording screen.)
ItemDescription of settings
[NAME]
It is possible to register names.1Press  4 to select [SET] and then press [MENU/SET].
2Enter...

VQT2S62108
Advanced (Recording pictures)
You can modify the pictures or information of an already registered person. You can also 
delete the information of the registered person.
1Select [FACE RECOG.] from the [REC] Mode menu, and 
then press  1. (P28)
2Press  4 to select [MEMORY] and press [MENU/SET].3Press  3/4/ 2/1 to select the face image to edit or delete 
and then press [MENU/SET].
4Press  3/4 to select the item and then press [MENU/SET].
5Press the shutter button halfway to close the menu....

109VQT2S62
Advanced (Recording pictures)
When [AUTO REGISTRATION] is set to [ON], the registration screen will display 
automatically after taking a picture of a face that has a high number of appearances.
•
Registration screen is displayed after approximately 3 pictures. (It is not counted when Burst 
Mode, Auto Bracket, White Balance Bracket, Multi Film Bracket or [AUDIO REC.] is set.)•It may be extremely hard to recognize only with [AUTO REGISTRATION], so register the face 
images with [FACE RECOG.]...

VQT2S62110
Advanced (Recording pictures)
[REC] Mode: 
Useful Functions at Travel Destinations
For details on the [SETUP] menu settings, refer to P28.
If you set the departure date or the travel destination of the vacation in advance, the 
number of days that have passed since the departure date (which day of the vacation it is) 
is recorded when you take the picture. You can display the number of days that have 
passed when playing back the pictures and stam p it on the recorded pictures with [TEXT...