Panasonic Dmc G10k Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc G10k Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 51
51VQT2S62 Basic You can display pictures by recording date.Note • The recording date of the picture selected in the playback screen becomes the date selected when the calendar screen is first displayed. •If there are multiple pictures with the same recording date, the first picture recorded on that day is displayed. •You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2010.•If you take pictures after...
Page 52
VQT2S6252 Basic ∫Switching the displayed image while maintaining the Playback Zoom You can switch the displayed image while maintaining the same zoom magnification and zoom position for the Playback Zoom. Switch to picture select operation by pressing the rear dial during Playback Zoom, and select pictures with 2/1. •It will switch between picture select operation and move zoom position operation every time the rear dial is pressed during Playback Zoom. Note •You can also delete the recording...
Page 53
![Page 53
53VQT2S62
Basic
∫When [DELETE ALL] has been selected with the [FAVORITE] (P134) setting
The selection screen is displayed again. Select [DELETE ALL] or
[ ALL DELETE EXCEPT Ü], press 3 to select [YES] and delete the pictures.
([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as
[FAVORITE].)
Note
•
Do not turn the camera off while deleting (while [ ‚] is displayed). Use a battery with sufficient
power or the AC adaptor (P161).
•If you press [MENU/SET] while deleting pictures using...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-52.png "Page 53
53VQT2S62
Basic
∫When [DELETE ALL] has been selected with the [FAVORITE] (P134) setting
The selection screen is displayed again. Select [DELETE ALL] or
[ ALL DELETE EXCEPT Ü], press 3 to select [YES] and delete the pictures.
([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as
[FAVORITE].)
Note
•
Do not turn the camera off while deleting (while [ ‚] is displayed). Use a battery with sufficient
power or the AC adaptor (P161).
•If you press [MENU/SET] while deleting pictures using...")
53VQT2S62 Basic ∫When [DELETE ALL] has been selected with the [FAVORITE] (P134) setting The selection screen is displayed again. Select [DELETE ALL] or [ ALL DELETE EXCEPT Ü], press 3 to select [YES] and delete the pictures. ([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as [FAVORITE].) Note • Do not turn the camera off while deleting (while [ ‚] is displayed). Use a battery with sufficient power or the AC adaptor (P161). •If you press [MENU/SET] while deleting pictures using...
Page 54
![Page 54
VQT2S6254
Advanced (Recording pictures)
Advanced (Recording pictures)Switching the Display of the LCD Monitor/
Viewfinder
Press [DISPLAY] to change.
A[DISPLAY] button
•When the menu screen appears, the [DISPLAY] button is not
activated.
With the [LCD DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the
displayed screen on the LCD monitor to display in [ ] (LCD monitor style) or [ ]
(viewfinder style).
When [ ] is set
BNormal display¢1, 2
C No display¢1
D Tu r n ed o ff
When [ ] is set
ENormal...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-53.png "Page 54
VQT2S6254
Advanced (Recording pictures)
Advanced (Recording pictures)Switching the Display of the LCD Monitor/
Viewfinder
Press [DISPLAY] to change.
A[DISPLAY] button
•When the menu screen appears, the [DISPLAY] button is not
activated.
With the [LCD DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the
displayed screen on the LCD monitor to display in [ ] (LCD monitor style) or [ ]
(viewfinder style).
When [ ] is set
BNormal display¢1, 2
C No display¢1
D Tu r n ed o ff
When [ ] is set
ENormal...")
VQT2S6254 Advanced (Recording pictures) Advanced (Recording pictures)Switching the Display of the LCD Monitor/ Viewfinder Press [DISPLAY] to change. A[DISPLAY] button •When the menu screen appears, the [DISPLAY] button is not activated. With the [LCD DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the displayed screen on the LCD monitor to display in [ ] (LCD monitor style) or [ ] (viewfinder style). When [ ] is set BNormal display¢1, 2 C No display¢1 D Tu r n ed o ff When [ ] is set ENormal...
Page 55
![Page 55
55VQT2S62
Advanced (Recording pictures)
With the [LVF DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the displayed
screen on the viewfinder to display in [ ] (viewfinder style) or [ ] (LCD monitor style).
When [ ] is set
When [ ] is set
¢1 Guide lines are displayed when the [GUIDE LINE] of the [CUSTOM] menu is set to anything
except [OFF].
It is possible to move the position of the guide line using the Quick Menu when it is set to
[ ]. (P56)
¢ 2 Histograms are displayed when the [HISTOGRAM]...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-54.png "Page 55
55VQT2S62
Advanced (Recording pictures)
With the [LVF DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the displayed
screen on the viewfinder to display in [ ] (viewfinder style) or [ ] (LCD monitor style).
When [ ] is set
When [ ] is set
¢1 Guide lines are displayed when the [GUIDE LINE] of the [CUSTOM] menu is set to anything
except [OFF].
It is possible to move the position of the guide line using the Quick Menu when it is set to
[ ]. (P56)
¢ 2 Histograms are displayed when the [HISTOGRAM]...")
55VQT2S62 Advanced (Recording pictures) With the [LVF DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the displayed screen on the viewfinder to display in [ ] (viewfinder style) or [ ] (LCD monitor style). When [ ] is set When [ ] is set ¢1 Guide lines are displayed when the [GUIDE LINE] of the [CUSTOM] menu is set to anything except [OFF]. It is possible to move the position of the guide line using the Quick Menu when it is set to [ ]. (P56) ¢ 2 Histograms are displayed when the [HISTOGRAM]...
Page 56
![Page 56
VQT2S6256
Advanced (Recording pictures)
∫Recording guide line
When you align the subject on the horizontal and vertical guide lines or the cross point of
these lines, you can take pictures with well-designed composition by viewing the size, the
slope and the balance of the subject.
∫ Set the position of the guide line with [ ]
•
Set the [GUIDE LINE] in the [CUSTOM] menu to [ ]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select guide line, and then press [MENU/SET].
•You can...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-55.png "Page 56
VQT2S6256
Advanced (Recording pictures)
∫Recording guide line
When you align the subject on the horizontal and vertical guide lines or the cross point of
these lines, you can take pictures with well-designed composition by viewing the size, the
slope and the balance of the subject.
∫ Set the position of the guide line with [ ]
•
Set the [GUIDE LINE] in the [CUSTOM] menu to [ ]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select guide line, and then press [MENU/SET].
•You can...")
VQT2S6256 Advanced (Recording pictures) ∫Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. ∫ Set the position of the guide line with [ ] • Set the [GUIDE LINE] in the [CUSTOM] menu to [ ]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select guide line, and then press [MENU/SET]. •You can...
Page 57
![Page 57
57VQT2S62
Advanced (Recording pictures)
∫Set the position of the histogram
•Set the [HISTOGRAM] in the [CUSTOM] menu to [ON]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select histogram, and then press [MENU/SET].
•You can also use the rear dial to set.
3Press 3/4/2/1 to set the position.4Press [MENU/SET] to finish the setting.
5Press [Q.MENU] to close the Quick Menu.
•You can also press the shutter button halfway to close the Quick
Menu.
•Position of the histogram can be set...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-56.png "Page 57
57VQT2S62
Advanced (Recording pictures)
∫Set the position of the histogram
•Set the [HISTOGRAM] in the [CUSTOM] menu to [ON]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select histogram, and then press [MENU/SET].
•You can also use the rear dial to set.
3Press 3/4/2/1 to set the position.4Press [MENU/SET] to finish the setting.
5Press [Q.MENU] to close the Quick Menu.
•You can also press the shutter button halfway to close the Quick
Menu.
•Position of the histogram can be set...")
57VQT2S62 Advanced (Recording pictures) ∫Set the position of the histogram •Set the [HISTOGRAM] in the [CUSTOM] menu to [ON]. (P124)1Press [Q.MENU] to display the Quick Menu. (P30)2Press 2/1 to select histogram, and then press [MENU/SET]. •You can also use the rear dial to set. 3Press 3/4/2/1 to set the position.4Press [MENU/SET] to finish the setting. 5Press [Q.MENU] to close the Quick Menu. •You can also press the shutter button halfway to close the Quick Menu. •Position of the histogram can be set...
Page 58
![Page 58
VQT2S6258
Advanced (Recording pictures)
Press 3/4 to select a mode and press
[MENU/SET].
•For information about flash settings that can be selected, refer
to “Available flash settings by Recording Mode”. (P59)
Press [MENU/SET] to close the menu.
•You can also press the shutter button halfway to close the menu.
The flash is activated twice. The interval between the first and second flash is
longer when [ ], [ ] or [ ] is set. The subject should not move until the
second flash is activated.
¢ [RED-EYE...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-57.png "Page 58
VQT2S6258
Advanced (Recording pictures)
Press 3/4 to select a mode and press
[MENU/SET].
•For information about flash settings that can be selected, refer
to “Available flash settings by Recording Mode”. (P59)
Press [MENU/SET] to close the menu.
•You can also press the shutter button halfway to close the menu.
The flash is activated twice. The interval between the first and second flash is
longer when [ ], [ ] or [ ] is set. The subject should not move until the
second flash is activated.
¢ [RED-EYE...")
VQT2S6258 Advanced (Recording pictures) Press 3/4 to select a mode and press [MENU/SET]. •For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P59) Press [MENU/SET] to close the menu. •You can also press the shutter button halfway to close the menu. The flash is activated twice. The interval between the first and second flash is longer when [ ], [ ] or [ ] is set. The subject should not move until the second flash is activated. ¢ [RED-EYE...
Page 59
![Page 59
59VQT2S62
Advanced (Recording pictures)
∫About the Digital Red-Eye Correction
When [RED-EYE REMOVAL] (P117) has been set to [ON] and Red-Eye Reduction
([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the
flash is used. The camera automatically detects red-eye and corrects the picture. (Only
available when the AF Mode is set to [ š] and face detection is active)
•
Under certain circumstances, red-eye cannot be corrected.•In the following cases, Digital Red-Eye Correction...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-58.png "Page 59
59VQT2S62
Advanced (Recording pictures)
∫About the Digital Red-Eye Correction
When [RED-EYE REMOVAL] (P117) has been set to [ON] and Red-Eye Reduction
([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the
flash is used. The camera automatically detects red-eye and corrects the picture. (Only
available when the AF Mode is set to [ š] and face detection is active)
•
Under certain circumstances, red-eye cannot be corrected.•In the following cases, Digital Red-Eye Correction...")
59VQT2S62 Advanced (Recording pictures) ∫About the Digital Red-Eye Correction When [RED-EYE REMOVAL] (P117) has been set to [ON] and Red-Eye Reduction ([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture. (Only available when the AF Mode is set to [ š] and face detection is active) • Under certain circumstances, red-eye cannot be corrected.•In the following cases, Digital Red-Eye Correction...
Page 60
![Page 60
VQT2S6260
Advanced (Recording pictures)
∫The available flash range to take pictures
•The available flash range is an approximation.
¢ When the [ISO LIMIT SET] (P119) is set to [OFF]
•At the time of flash photography, when distance with the subject is near, the flash light is
interrupted with the lens and a part of the picture being taken becomes dark. Check the
distance between the camera and the subject w hen taking a picture. The distance from which
the subject blocks the flash light differs...](http://img.usermanuals.tech/thumb/58/65511/w300_dmc-g10k_en_om_d-59.png "Page 60
VQT2S6260
Advanced (Recording pictures)
∫The available flash range to take pictures
•The available flash range is an approximation.
¢ When the [ISO LIMIT SET] (P119) is set to [OFF]
•At the time of flash photography, when distance with the subject is near, the flash light is
interrupted with the lens and a part of the picture being taken becomes dark. Check the
distance between the camera and the subject w hen taking a picture. The distance from which
the subject blocks the flash light differs...")
VQT2S6260 Advanced (Recording pictures) ∫The available flash range to take pictures •The available flash range is an approximation. ¢ When the [ISO LIMIT SET] (P119) is set to [OFF] •At the time of flash photography, when distance with the subject is near, the flash light is interrupted with the lens and a part of the picture being taken becomes dark. Check the distance between the camera and the subject w hen taking a picture. The distance from which the subject blocks the flash light differs...