Panasonic Dmc G7 Owners Manual

311
11. Using the Wi-Fi function
1Select the menu. (P63)
2Select [Via Network] or [Direct], and connect.  (P328)3Select a device you want to connect.
4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P336)
5Take pictures.
•To terminate the connection, follow the steps below:
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function] >  [Yes]
•You can terminate the connection or change the send settings by pressing [Wi-Fi].  (P292)
You cannot change the settings while sending...

11. Using the Wi-Fi function
312
When sending images to PC
∫Methods for sending and images that can be sent
¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the  file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
•Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the operating  instructions of the destination 
device.
•For details on how to send images, refer to  P334.
You can send pictures...

313
11. Using the Wi-Fi function
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attemp t to create a receive folder 
may fail if the account includes non-alphanumeric characters.
∫ When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P346) .
2Create a folder that receives images with “ PHOTOfunSTUDIO ”....

11. Using the Wi-Fi function
314
1Select the menu. (P63)
2Select [Via Network] or [Direct], and connect.  (P328)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Ma nual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.
5Check the send settings, and select [Set].
•To change the send setting, press [DISP.].  (P336)
6Take pictures.
•To terminate the connection, follow the steps...

315
11. Using the Wi-Fi function
1Select the menu. (P63)
2Select [Via Network] or [Direct], and connect.  (P328)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Ma nual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.5Check the send settings, and select [Set].
•To change the send setting, press [DISP.].  (P336)
6Select [Single Select] or [Multi Select].
•
Folders sorted by the...

11. Using the Wi-Fi function
316
Using Web services
You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”.
By setting up automatic transfers of pictures and motion pictur es to the Cloud Sync 
Service, you can receive the transferred pictures or motion pic tures on a PC or 
smartphone.
A Wireless access point BWeb service CCloud Sync Service
Preparations
To send images to a web service or a cloud folder, you need to  register to “LUMIX 
CLUB”  (P323).
To send images to a web service,...

317
11. Using the Wi-Fi function
∫Methods for sending and images that can be sent
¢ Excluding motion pictures recorded with their size set to [4K]  in [Rec Quality]
•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the web servic e.•For details on how to send images, refer to P334.
•Images uploaded to the web service cannot be displayed or delet ed with this camera. Check 
images by accessing the web service with your smartphone or com...

11. Using the Wi-Fi function
318
When sending images to web services, the web service being used must be registered 
with the “LUMIX CLUB”.  (P323)•Check the “FAQ/Contact us” on the following site for compatible  web services.
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the web service y ou want to use, and 
have the login information available.
1Connect to the “LUMIX CLUB” site using a smartphone or computer ....

319
11. Using the Wi-Fi function
1Select the menu. (P63)
2Select [Via Network], and connect.  (P328)3Select a web service.4Check the send settings, and select [Set].
•To change the send setting, press [DISP.].  (P336)
5Select [Single Select] or [Multi Select].
Select and send the images ([Send Images Stored in the Camera])
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images Stored in the Camera]  > [Web service]
[Single Select] setting
1 Select the picture.
2 Select [Set]....

11. Using the Wi-Fi function
320
∫Sending images in the camera to a web service with simple opera tions
Once you send an image, you can send other images to a web serv ice with simple,  
smartphone-like operations in an environment where a wireless a ccess point connection is 
available.
(The instructions below assume that you are already registered  to “LUMIX CLUB” 
and the camera has a record of a connection to a wireless acces s point.)
1Display an image.2Press 4.
(When group pictures are selected,...