Panasonic Dmc G7 Owners Manual

321
11. Using the Wi-Fi function
∫Using [Cloud Sync. Service]  (As of May 2015)
•
If you set the picture destination to [Cloud Sync. Service], se nt pictures are temporarily saved 
in the cloud folder, and they can be synchronized with the device in use, such as the PC or 
smartphone.
•A Cloud Folder stores transferred images for 30 days (up to 100 0 pictures). Transferred images 
are deleted automatically 30 days after the transfer. Furthermo re, when the number of stored 
images exceeds 1000, some...

11. Using the Wi-Fi function
322
1Select the menu. (P63)
2Select [Via Network], and connect.  (P328)3Check the send settings, and select [Set].
•To change the send setting, press [DISP.].  (P336)
4Take pictures.
•To terminate the connection, follow the steps below:
>  [Setup]  > [Wi-Fi]  > [Wi-Fi Function] >  [Yes]
•You can terminate the connection or change the send settings by  pressing [Wi-Fi]. (P292) 
You cannot change the settings while sending pictures. Wait unt il sending is complete.
1Select the...

323
11. Using the Wi-Fi function
Registering to the “LUMIX CLUB”
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using, or transfer these images to web services .
Use the “LUMIX CLUB” when uploading pictures to web services.
•
You can set the same “LUMIX CLUB” login ID for this unit and a  smartphone. (P326)
1Select the menu.  (P63)
2Select [Set/Add Account].
3Select [New account].
•Connect to the network....

11. Using the Wi-Fi function
324
5Read through the “LUMIX CLUB” terms of use and select [Agree].
•You can switch pages by 3/4.
•You can enlarge (2 k) the display by rotating the rear dial to the right.•You can reset the enlarged display to its original size (1 k) by rotating the rear dial to the 
left.
•You can move the position of the enlarged display with  3/4 /2/ 1.•Press [ ] to cancel the process without acquiring a login ID.
6Enter a password.
•Enter any combination of 8 to 16 characters and numbers...

325
11. Using the Wi-Fi function
Preparation:
When using the acquired login ID, check the ID and password.
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” 
website from your smartphone or PC and change the “LUMIX CLUB”  password in 
advance.
•
The login ID and password registered to the “LUMIX CLUB” cannot  be changed on this unit.
1Select the menu. (P63)
2Select [Set/Add Account].3Select [Set Login ID].
•The login ID and password are displayed.•The password is displayed as “...

11. Using the Wi-Fi function
326
•Setting the same login ID on this unit and your smartphone is convenient for sending images on 
this unit to other devices or web services.
Check the details if the terms of use have been updated.
1Select the menu.  (P63)
2Select [Terms of use].
•The camera will connect to the network and the terms of use wil l be displayed.
Close the menu after checking the terms of use.
To set the same login ID for the camera and the smartphone/tabl et
When either this unit or the...

327
11. Using the Wi-Fi function
Delete the login ID from the camera when transferring it to another party or disposing of it. 
You can also delete your “LUMIX CLUB” account.
1Select the menu.  (P63)
2Select [Delete account].
•The message is displayed. Select [Next].
3Select [Yes] in the login ID delete confirmation screen.
•The message is displayed. Select [Next].
4Select [Yes] on the confirmation screen for deleting the “LUMIX  CLUB” 
account.
•
If you want to continue using the service, selecting [No]...

11. Using the Wi-Fi function
328
About Connections
If you have selected [New Connection], select a Wi-Fi function and destination first, and 
then select a connection method.
If you have selected [Select a destination from History] or [Select a destination from 
Favorite], you can connect with the same Wi-Fi connection setti ngs as used previously.
This section describes connection methods.
•
When connecting with the same settings as used previously, refe r to P332 .
When a screen similar to the one...

329
11. Using the Wi-Fi function
You can select the method for connecting to a wireless 
access point.
¢WPS refers to a function that allows you to easily configure 
the settings related to the connection and security of wireless  
LAN devices.
To check if the wireless access point you are using is 
compatible with WPS, refer to the manual of the wireless 
access point.
Connecting via a wireless access point (via the network)
[WPS (Push-Button)] Save push button type wireless access point that is...

11. Using the Wi-Fi function
330
Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if the network authentication is 
encrypted.
•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the 
wireless access point you are using.
1Select the wireless access point you are connecting 
to.
•
Pressing [DISP. ]  will search for a wireless access point 
again.
•If no wireless access point is found, refer to “When 
connecting with...