Panasonic Dmr Bs850 Operating Instructions Manual

							91
RQT9434
Convenient functions
(All factory default settings ar e indicated with underlined text.)
§1The default setting is “PCM”.§2The default setting is “Bitstream”.
Sound
Dynamic Range Compression[BD-V] [DVD-V]  
Change the dynamic range for late night viewing.
[On] [Off
][Automatic]
DownmixSwitch the downmix system  for playing back multi-channel 
surround sound.
≥ When “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or 
“MPEG” is set to “Bitstream”, there are no downmix effects for the 
audio output.
≥ The audio output will be in “Stereo” in the following cases.
– AVCHD playback
–[BD-V] : Playback of clicking sound on the menu and audio with 
secondary video in picture-in-picture mode
[Stereo
] When connected to equipment that does not  support the virtual surround function.
[Surround 
encoded] When connected to equipment that supports the 
virtual surround function
Bilingual Audio Selection(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
≥
Copying to a DVD-R, DVD-RW (DVD-Video format), +R and 
+RW.
≥ “Rec for High Speed Copy” is enabled. ( >90)
≥ Recording sound in LPCM ( >92, “Audio Mode for XP 
Recording”).
[M 1
][ M2]
≥ You cannot select the audio on this unit when recording from an 
external source, such as when copying from a video cassette 
recorder (except from DV equipment connected to this unit’s DV 
input terminal). Select the audio on the other equipment.
≥ When recording from the unit’s DV terminal, select the type of 
audio recording from “Audio Mode for DV Input” ( >92).
Digital Audio Output≥Press [OK] to show the following settings.
PCM Down ConversionSelect how to output audio with a sampling frequency of 96 kHz.
It will be converted to 48 kHz regar dless of the setting in following 
cases. 
≥ The signals have a sampling frequency of over 96 kHz.
≥ The disc has copy protection.
≥ “BD-Video Secondary Audio” is set to “On”. ( [BD-V])
[On] Signals are converted to  48 kHz. (Choose when the 
connected equipment cannot  process signals with a 
sampling frequency of 96 kHz.)
[Off
] Signals are output as 96 kHz. (Choose when the  connected equipment can proc ess signals with a sampling 
frequency of 96 kHz.)
Dolby D/Dolby D +/Dolby TrueHD§1
DTS/DTS-HD§2
MPEG§1
Select to output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, 
DTS Digital Surround, DTS-HD High Resolution Audio, DTS-HD 
Master Audio or MPEG as bitstream or PCM. 
[Note]
≥ Not making the proper settings may result in noise.
≥ If the unit is connected with the HDMI AV OUT terminal, the 
specifications of the connected equipment take preference over 
this unit and audio selected in these items may not be output 
(e.g., when a television is connected, the HDMI audio output of 
this unit is limited to down-mixed 2ch.)
[Bitstream
] Select “Bitstream” when the connected equipment  can decode the respective audio format.
– Connect equipment supporting HDMI Ver.  1.3a (High Bit Rate Audio) and use a High 
Speed HDMI Cable in order to output High Bit 
Rate Audio such as Dolby Digital Plus, Dolby 
TrueHD, DTS-HD High Resolution Audio or 
DTS-HD Master Audio.
[PCM
] Select “PCM” when the connected equipment  cannot decode the respective audio format.
Refer to the operating instructions for connected 
devices to verify whether or not they can decode 
each of the audio formats.
Set the speaker output on the amplifier when 
output with PCM.
BD-Video Secondary Audio ([BD-V]  with secondary audio)
Turn on/off the clicking sound on the menu and audio with 
secondary video.
[On
] The sampling frequency is converted to 48 kHz. Audio will be converted to Dolby Digital or DTS 
during playback of the BD-Video with secondary 
audio when “Bitstream” ( >above) is selected.
[Off] Output in original audio method. 
DMRBS850&750EG-RQT9434-L_eng.book  91 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							92
RQT9434
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
(All factory default settings are indicated with underlined text.)
Depending on the connected equipment, some items may be 
shaded in grey on the display and cannot be selected, or you may 
not be able to change the settings.
Audio Mode for XP RecordingChoose the audio type when recording or copying with XP mode.
[Dolby Digital
] (> 118) [LPCM] ( >119)
≥ The picture quality of LPCM recordings may be lower than that of 
normal XP mode recordings.
≥ The audio recording becomes Dolby Digital even if you selected 
LPCM when using a recording mode other than XP.
≥ When recording a bilingual broadcas t, select the type of audio in 
advance from “Bilingual Audio Selection” ( >91).
Audio Mode for DV InputYou can select the kind of audio when recording from the unit’s DV 
input terminal ( >60).
[Stereo 1
] Records audio (L1, R1).
[Stereo 2] Records added audio such as narration (L2, R2)  subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
≥ When recording bilingual broadcast, select the type of audio in 
advance from “Bilingual Audio Selection” ( >91).
Audio Channels for HG / HX / HE / HL RecordingThis will set the audio when copying DR mode titles to BD-RE or 
BD-R disc in “HG”, “HX”, “HE”, or “HL” mode, or converting the 
recording mode to “HG”, “HX”, “HE”, or “HL” mode ( >50).
[5.1-channel
]§Record using 5.1 ch audio
[2-channel] Record using 2 ch audio. 
§  If the audio sampling frequency is not 48 kHz, surround audio is  mixed and recorded in front LR channels. Audio will be output 
from two front speakers only, even if you play it on 5.1 ch 
speaker connection.
Display
LanguageChoose the language for these menus and on-screen messages.
[Deutsch] [English] [Français] [Italiano]
≥The default language is the language setting selected when 
making the initial settings.
On-Screen MessagesChoose the approximate time until the digital channel information 
screen ( >27) disappears automatically.
The length of time the Control Panel ( >77) is displayed can also 
be changed, but “Off” does not work.
[Off] (The digital channel information is not displayed.)
[3 sec.] [5 sec.
] [7 sec.] [10 sec.]
Unit’s DisplayChanges the brightness of the unit’s display.
This setting is fixed with “Autom atic” if you set “Power Save” (> 95) 
to “On”.
[Bright
][Dim]
[Automatic] The display turns da rk during play and disappears 
when the unit is turned off. It reappears momentarily 
if a button is pressed. While using this mode, the 
standby power consumption can be reduced.
Screen SaverThis is to prevent burn-in on the screen.
≥ When this is set to “On”, the masked-off area on the screen 
becomes grey.
[Only when connecting with an HDMI  cable or a component video 
cable and “HDMI Video Format” ( >93) is set to any other mode 
than “576p/480p”, or “Component Resolution” ( >94) is set to 
“720p” or “1080i”]
[On
] If there is no operation for a while or more, the  displayed screen switches to the other states 
automatically. 
– When the DIRECT NAVIGATOR, TV Guide,  Timer recording list, Copying list or 
FUNCTION MENU, etc. is displayed, the screen 
saver is not displayed. 
– When Music is played, the display returns to the 
screen saver mode. (P layback continues.)
– When still pictures are shown (except for  slideshows), the display returns to the Picture 
View screen. 
– The display returns to the screen saver mode  when it is paused by the Pause Live TV. (Pause 
status will continue.)
[Off]
Te l e t e x tSelect the Teletext display mode. ( >28)
[TOP (FLOF)
] When switching Teletext display mode to  either TOP mode or FLOF (FASTEXT) 
mode.
[List] When switching Teletext display mode to 
List mode.
Blue LEDSet the lighting method for the lamp on the SD card slot.
[On
]
[SD inserted] When this unit is turned on and SD card is inserted,  the lamp is lighted.
[Off]
Connection
TV AspectSet to match the type of television connected.
[16:9
] When connected to a 16:9 widescreen television.
[Pan & Scan] When connected to a 4:3 aspect  television, side picture is trimmed for 
16:9 picture.
This setting may not work and the 
pictures may be shown in the 
letterbox style depending on the 
content.
[Letterbox] When connected to a 4:3 aspect  television. 16:9 picture is shown in 
the letterbox style.
Aspect for 4:3 VideoTo play a 4:3 title, set how to show pictures on a 16:9 widescreen 
television.
[4:3
] Picture output expands left or right.
[16:9] Picture is output as original aspect with side  panels.
DMRBS850&750EG-RQT9434-L_eng.book  92 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							93
RQT9434
Convenient functions
∫ Types of disc or title recorded on HDD, BD-RE or 
BD-R for the type of connected TV
When you use the discs recorded either PAL or NTSC, or playback a 
title recorded on HDD, BD-RE or BD-R using PAL or NTSC, refer to 
this table.
(≤: Possible to view, –: Impossible to view)
§ 1Select “PAL60” for “NTSC Video Output” in the Setup menu 
(> 90). If your television is not equipped to handle PAL 525/60 
signals the picture will not be shown correctly.
§ 2Select “NTSC” in “TV System”.
≥ When playing back a title recorded on the HDD, BD-RE or BD-R, 
ensure that you match the “TV System” setting to the title (PAL or 
NTSC).
TV SystemChange the setting to match the equipment you are connecting 
with, or to match the title when there are both PAL and NTSC titles 
on the HDD, BD-RE or BD-R.
[PAL
] ≥Select when connecting to a PAL or Multi-system 
television.
≥ Select to record television programmes and PAL input 
from other equipment.
≥ Select when playing a PAL input title recorded on the 
HDD, BD-RE or BD-R.
[NTSC] ≥Select when connecting to a NTSC television. 
Television programmes cannot be recorded properly.
≥ Select to record NTSC input from other equipment.
≥ Select when playing a NTSC input title recorded on the 
HDD, BD-RE or BD-R.
[Note]
≥ This unit cannot record NTSC signa ls to discs that already have 
PAL signal recordings. (However , both types of programmes can 
be recorded onto the HDD, BD-RE or BD-R.) 
≥
If “NTSC” has been selected, the TV Guide system cannot be used.
≥ A disc or title with  different “TV System” may not be able to 
playback while recording or on standby for the timer recording. 
You will be able to playback by  changing the “TV System” settings 
in that case, but to prevent failure of the timer recording, change 
back the settings before the recording starts.
To change the setting all at once (PAL!#NTSC)While stopped, keep pressing [ ∫] and [ 91) is set to “PCM”
– When the audio is Dolby Digital, Dolby Digital  Plus, Dolby TrueHD or LPCM
[Off] It is output via the original channels. However,  surround audio of DTS and DTS-HD will be output 
as 7.1 ch automatically.
VIERA LinkSet to use “HDAVI Control” function when connected with an 
HDMI cable to a device that supports “HDAVI Control”.
[On
]
[Off] Select when you do not want to use “HDAVI Control”.
DMRBS850&750EG-RQT9434-L_eng.book  93 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							94
RQT9434
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
Component ResolutionThis sets the video output resolution when using the component 
video terminal. 
[576i/480i] [576p/480p] [720p] [1080i]
≥You cannot change the setting while the “HDMI Video Mode” is 
set to “On”. Set the “HDMI Video Mode” to “Off” and set the “AV1 
Output” to “Video ( with component )” or “S Video ( with 
component )”.
≥ If it is set to “720p”, images other than “720p” will be output as 
“1080i”.
≥ The video output resolution will be restricted to “576p/480p” even 
if you select “720p” or “1080i” when viewing or recording the 
following images:
– Some programmes in the HD format
– DVD-Video discs
–DivX
– BD-Video discs recorded at a rate of 50 field per second
– Images input via AV1, AV2 or DV input
≥ Press the [ ∫] and [1 ] (PLAY) for more than 5 seconds when the 
image is disturbed by changing the se tting. It will be set to “576i/
480i”.
AV1 OutputSet according to the terminal of the connected TV.
Select “Video ( with component )” or “S Video ( with component )” 
for component output (progressive output).
If this unit is connected with an HDMI cable, you cannot select 
“RGB 1 ( without component )” or “RGB 2 ( without component )”.
When a decoder is connected, do not set to “RGB 1 ( without 
component )”.
[Video ( with component )
]Select when a TV is connected that can receive a composite signal.
[S Video ( with component )]
Select when a TV is connected that can receive an S Video 
signal.
[RGB 1 ( without component )] Select when a TV is connected t hat can receive an RGB signal. If 
you always would like to view the picture from the unit in RGB 
signal, select this mode. The TV screen will automatically switch 
to display the picture from the unit when the unit is turned on.
[RGB 2 ( without component )] Select when a TV is connected t hat can receive an RGB signal. If 
you would like to switch to display the picture from the unit only 
when playback or viewing menus, select this mode.
AV2 SettingsSet to match the connected equipment.
≥ Press [OK] to show the following settings.
AV2 InputSet to “RGB / Video” or “RGB” when receiving or recording RGB 
output from external equipment.
[RGB / Video
] [RGB] [Video] [S Video]
Ext LinkThis setting cannot be made when the “TV System” is set to 
“NTSC” ( >93).
[Ext Link 1] When a Set Top Box etc. which transmits a special  control signal recordings  via the 21-pin Scart cable 
is connected.
Start and stop timings of recording are controlled 
by the control signal.
[Ext Link 2
] When external equipment with a timer function is  connected.
When it turns on, recording starts.
When it turns off, recording stops.
Common Interface
Access to software contained on Common Interface (CI) modules. 
(> 16, 19) Follow the on-screen instructions.
Network Settings
IP Address / DNS Settings (>96)
≥ Press [OK] to show the following settings.
Connection Test
IP Address Auto-assignment
[On][Off]
IP Address
Subnet Mask
 
Gateway Address
DNS-IP Auto-assignment
[On][Off]
Primary DNS 
Secondary DNS 
Connection Speed Auto-configure
[On][Off]
Connection Speed SettingThis is enabled only when “Connecti on Speed Auto-configure” is 
turned “Off”.
[10BASE half duplex] [10BASE full duplex]
[100BASE half duplex] [100BASE full duplex]
Proxy Server Settings (> 97)
≥ Press [OK] to show the following settings.
Initialize
Set the setting of the “Proxy Server Settings” back. 
Proxy Address
(The initial setting is blank.)
Proxy Port Number
(The initial setting is “0”.)
Connection Test
Internet Content Settings ( >97)
≥Press [OK] to show the following settings.
LockYou can restrict using VIERA CAST.
Follow the on-screen instructions . Enter a 4-digit PIN with the 
numbered buttons when the PIN setting screen is shown. It will be 
the common PIN for “DVD-Video Ratings”, “BD-Video Ratings”, 
and “Lock”.
Do not forget your PIN.
[On] [Off
]
Automatic Volume Control
[On]
[Off] Select “Off” when  the audio is warped while 
using VIERA CAST.
Home Network ( DLNA ) Settings ( >97)
You will be able to access this unit from Panasonic DLNA 
compatible equipment on the network by registering them to this 
unit.
It is also possible to change t he name of this unit on the network.
Server ( DLNA ) Settings (>97)
By allowing access from n on-Panasonic DLNA compatible 
equipment on the network, it allows them to access this unit.
DMRBS850&750EG-RQT9434-L_eng.book  94 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							95
RQT9434
Convenient functions
(All factory default settings ar e indicated with underlined text.)
Others
Automatic StandbySelect how long the unit remains on when it is not being used.
[2 hours] [4 hours
] [6 hours] [Off]
Remote ControlChange the remote control code on the main unit and the remote 
control (the two must match) if you place other Panasonic products 
close together.
[BD 1
][BD 2][ BD 3]
Use “BD 1”, the factory set code, under normal circumstances.
1 Press [ 3,4] to select the code (“BD 1”, “BD 2” or “BD 3”) 
and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button 
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
∫When the following indicator appears on the 
unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s 
( > step 2).
[Note]
Executing “Shipping Condition” in the Setup menu returns the main 
unit code to “BD 1”. Change the remote control code to 1
( > step 2).
ClockThis unit usually obtains time an d date information from digital 
broadcasts and automatically corrects the time several times a day. 
However, if the time is not set correctly, use the settings listed in the 
method below.
1 Press [ 3,4] to select “Off” of “Automatic” and press [OK].
When you select “Off”
2 Press [ 2,1] to select the item you want to change.
The items change as follows:
Hour !#Minute !#Second !#Day!# Month !#Ye a r
     ^-----------------------------------------------------------------------------------------J
3 Press [ 3,4] to change the setting.
4 Press [OK] when you have finished the settings.
The clock starts.
∫To change the Time Zone When the time is not correct, set “Time Zone” (GMT -6 to + 6).
1Press [ 3,4] to select “On” of “Automatic” and press [OK] in 
step 1. 
Auto clock setting starts. This takes a few minutes. 
“Automatic clock setting completed.” screen is displayed.
2Press [ 1].
3Press [ 3,4] to select the correct time zone and press [OK].
4 Press [RETURN ].
Clock
Time Automatic Time ZoneDate
Automatic
Please set the clock.
OK:  access     RETURN:  leaveOK
RETURN
15 453927 52009
Off
Time Zone  >below
PIN Entry
This PIN will be used for following controlling
– BD-Video playback
– DVD-Video playback
– Using VIERA CAST
≥Make a note of PIN in case you forget it.
1 Press  [3, 4] to select the number, then press [ 1].
≥ You can also use the numbered buttons.
2 Repeat step  1 for enter 4-digit PIN.
3 Press [OK] to confirm.
Power Save
[On] Power consumption is minimiz ed when the unit is turned to 
standby ( >115).
[Off] It is possible to start quickly from standby mode.
≥ “Unit’s Display” ( >92) is fixed with “Automatic” when “Power 
Save” is set to “On”, and is changed to “Bright” when “Power 
Save” is set to “Off”.
≥ This function cannot be enabled  when the DLNA function is 
enabled in Home Network ( DLNA ) Settings or Server ( DLNA ) 
Settings. (> 94)
System Update (> 98)In order to update this unit’s software (firmware) and to support 
system changes made by broadcasts, this unit periodically 
performs software (firmware) updates.
Press [OK] to show the following settings.
Software Update in Standby
[0:00 to 23:00]§When you set this unit to standby mode, 
software (firmware) updates and TV Guide 
data are downloaded automatically at the 
specified time.
[Off]
§ Default setting is “3:00”.
Software LicenceInformation about the software licence is displayed.
DivX RegistrationYou need this registration code to purchase and play DivX Video-
on-Demand (VOD) content ( >45).
Initialize≥Press [OK] to show the following settings.
Shipping ConditionAll the settings except for the ratings level and ratings PIN return 
to the factory preset. The timer recording programmes are also 
cancelled.
[Yes] [No
]
Default SettingsAll the settings other than the  tuning settings, clock settings, 
language settings, disc language settings, ratings level, ratings 
PIN, remote control code, network settings etc. return to the 
factory presets.
[Yes] [No
]
OK
Remember the PIN.
PIN Entry
0000
DMRBS850&750EG-RQT9434-L_eng.book  95 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							96
RQT9434
Changing the unit’s settings
These settings are used if you will connect this unit to a network.
The connection to the Internet may take time or the internet may not 
be connected depending on the connection environment.
It is recommended that you use a broadband connection.
∫ Testing the connectionAlways test the connection when a LAN cable is connected or when 
new “IP Address / DNS Settings” have been made.
1 Press [FUNCTION MENU].
2 Press [ 3,4] to select “Others” and press [OK].
3 Press [ 3,4] to select “Setup” and press [OK].
4 Press [ 3,4] to select “Netwo rk Settings” and 
press [OK].
5 Press [ 3,4] to select “IP Address / DNS 
Settings” and press [OK].
6 Press [ 3,4] to select “Connection Test” and 
press [OK].
“Testing”: The test is in progress.
“OK”: The connection is completed.
“Failed”: Please check  the connection and settings.
[Note]
≥ Perform the “Connection Test” also when any change was made to 
the “IP Address / DNS Settings”.
≥If the connection test fails, it may be necessary to set the MAC 
address of this unit at the router side. The MAC address can be 
displayed by selecting “Network Settings” and “IP Address / DNS 
Settings” in steps 1–5 ( >above).
∫Setting the IP addressIn most cases, default settings can normally be used without making 
any changes.
Set the IP address only when the router has no DHCP server 
functions or when the router’s  DHCP server function is disabled.
After performing steps 1–5 ( >left)
6Press [ 3,4 ] to select “IP Address Auto-
assignment” and press [ 2,1] to select “Off”.
7Press  [ 3 ,4 ] to select “IP Address”, “Subnet 
Mask” or “Gateway Address” and press [OK].
8 Enter numbers with the numbered buttons and  press [OK].
≥After checking the specificat ions for your broadband router, 
enter each number.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable. Assign a different number  from those of other devices for 
the “IP Address” and the same number for others.
≥ If a wrong number is entered, then press [DEL].
9Press [ 2,1 ] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
∫ Setting the DNS-IPIn most cases, default settings can normally be used without making 
any changes.
When setting an assigned DNS server from your internet service 
provider, perform the following settings. 
After performing steps 1–5 ( >left)
6Press  [ 3 ,4 ] to select “DNS-IP Auto-
assignment” and press [ 2,1] to select “Off”.
7Press  [ 3 ,4 ] to select “Primary DNS” or 
“Secondary DNS”and press [OK].
8 Enter numbers with the numbered buttons and  press [OK].
≥Follow the instructions given by your internet service provider 
and enter the numbers.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable and assign the same number.
≥ If a wrong number is entered, then press [DEL].
9Press [ 2,1 ] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
∫ Setting the connection speedWhen the connection test results in “Failed” after the IP and DNS-IP 
addresses are assigned, perform the following settings.
After performing steps 1–5 ( >left)
6Press  [ 3, 4] to select “Connection Speed Auto-
configure” and press [ 2,1 ] to select “Off”.
7Press  [ 3 ,4 ] to select “Connection Speed 
Setting” and press [ 2,1] to select a 
connection speed.
≥ Select a connection speed in  accordance with the environment 
of the network connected.
≥ When the settings are changed,  the network connection may be 
disabled depending on the device.
Network Settings
Preparation
Connect to the network. ( >103)
RETURN
OK
IP Address / DNS Settings
Connection Test
BíBí BíBí
On
On
On On
On On
:„:„:„:…:w:„:„:„:…:w:„:„:„:…:w:„:„:„
:
						

							97
RQT9434
Convenient functions
∫ Setting the proxy serverIn most cases, default settings  can normally be used without making 
any changes.
Please use this setting when instruct ed to by your Internet service 
provider.
≥ Set the proxy server only after the connection test is completed 
properly.
After performing steps 1–4 ( >96, Testing the connection)
5 Press [ 3,4] to select “Proxy Server Settings” 
and press [OK].
6 Press [ 3,4] to select “Connection Test” and 
press [OK].
7 Press [ 3,4] to select “Proxy Address” and 
press [OK].
( > 80, Entering text)
After the input of “Proxy Address” is completed
8 Press [ 3,4] to select “Proxy Port Number” and 
press [OK].
9 Enter numbers with the numbered buttons and  press [OK].
10Press [2, 1] to select “Yes” and press [OK].
To set back to default setting 
After performing step 5 ( >above)
1 Press [ 3,4] to select “Initialize” and press [OK].
2 Press [ 2,1] to select “Yes” and press [OK].
∫ Setting the internet  content (VIERA CAST)After performing steps 1–4 ( >96, Testing the connection)5 Press [ 3,4] to select “Internet Content 
Settings” and press [OK].
≥ Lock ( >94)
≥ Automatic Volume Control
Select “On”, the volume is contro lled by this unit automatically. If 
you want to enjoy the original volume, set it to “Off”.
∫ Register the DLNA compatible equipment to this 
unit
After performing steps 1–4 ( >96, Testing the connection)
“Testing”: The test is in progress.
“OK”: The connection is completed.
Press [RETURN ] to exit.
“Failed”: Please check t he connection and settings.
RETURN
Proxy Server SettingsInitializeProxy AddressProxy Port Number
OK
0Connection Test----
0
Proxy Port Number
Please input HTTP Proxy Server Port Number 
and press “OK”. The number will be set to “0” 
by pressing “OK” when there is no number 
input. 
Press “DEL” button if a wrong number
is entered.
0 - Number9
RETURN
Internet Content Settings
Automatic Volume Control
OK
On Off
Lock
≥
When connecting Panasonic DLNA compatible equipment
5 Select “Home Network ( DLNA ) Settings” and 
press [OK].
6 Select “On” and press [OK].
7 Select “Yes” and press [OK].
Access this unit from the connected DLNA compatible 
equipment within 10 minutes.
≥ Up to 4 devices can be registered.
≥ Even if it is Panasonic DLNA compatible equipment, you may not 
be able to register from Home Network ( DLNA ) Settings.
In such a case, register the equipment from Server ( DLNA ) 
Settings ( >below)
≥
When connecting non-Panasonic DLNA compatible equipment
5 Select “Server ( DLNA ) Settings” and press  [OK].
≥Up to 4 devices can be registered.
6 Select the MAC Address for the connected 
equipment and press [OK].
≥Up to 12 devices can display the MAC Address.
7 Select “Yes” and press [OK].
∫ Viewing video in this unit via the registered 
equipment ( >79, DLNA feature)
RETURN
Home Network ( DLNA ) Settings
Registered devices list
Set unit name
OK
Off
Home Network ( DLNA )
RETURN
Server ( DLNA ) Settings
MAC Address
OK
Off
Server ( DLNA ) function
DMRBS850&750EG-RQT9434-L_eng.book  97 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							98
RQT9434
Software (firmware) Update
Software (firmware) of this unit can be updated automatically by 
following method. 
≥From broadcasts
≥ From Internet [network connection and setting is required. ( >96, 
103)] 
Update of the software (firmware) is done when it is in standby 
mode. 
Once the new software (firmware) is found, it will start the download 
of the software (firmware), and then the upload.
Download of the software (firmware) will start automatically when the 
power of this unit is turned off or when the set time comes ( >95)
≥ The time it takes to update depends on the connection.
– For Broadcast: About 2 to 4 hours
– For Internet: About 1 hour
(It may take longer than specified above to download because 
the download time differs depending on the network 
environment. It is recommended to be used in a broadband 
environment.) 
Time to start the download of the software (firmware) can be set 
arbitrarily. If you do not want to perform the software (firmware) 
update during the standby mode, set the Software Update in 
Standby in the Setup menu to Off. (> 95)
∫The unit’s display during the update
e.g., 
≥“SW-DL ” : Software (firmware) is downloading.
Download will stop when the power is turned on, or the timer 
recording starts.
≥ “START ” : Update of the software (firmware) will start once the 
download is completed.
≥ “UPD  / ” : Software (firmware) is updating.
≥ “FINISH ” : Updated of the software (firmware) has completed.
[Note]
≥If the timer recording is scheduled within the following time at the 
start of the download, the download will not be executed.
– For broadcast: Within 4 hours
– For Internet: Within 1 hour
≥ If downloading on this unit fails or  this unit is not connected to the 
Internet, then you can download the latest software (firmware) from 
the following website and burn it to a CD-R to update the software 
(firmware).
http://panasonic.jp/support/global/cs/ ≥
Software (firmware) of CAM (compatible CI Plus) can be updated 
automatically from broadcasts.
≥ Availability of software (firmware) update is detected while viewing 
the programmes compatible with CI Plus.
Notification is displayed on the screen if available.
≥ Notice is not displayed in the following cases:
– When recording a programme
– When scheduled recording and update occur simultaneously
– When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.
Follow the on-screen instructions when updating.
∫ The unit’s display during the update
e.g., 
≥ If you did not update or if the notice for update did not display on 
the screen, you will be notified on the Digital Channel Information 
of the channel where the update for CAM was detected.
To perform an update, press the Red” button and follow the on-
screen instructions.
[Note]
≥Operations such as view, playback, or record cannot be performed 
while updating the CAM.
If you press the [ Í] on the remote control while updating the CAM, 
the power of this unit will turn off automatically after the update.
≥ For details, refer to your CAM’s  operating instructions or consult 
your dealer.
You cannot operate the unit until the update is complete. 
Removing the AC mains lead while the update is in progress 
may damage the unit. Don’t remove the AC mains lead during 
the update.
Update software (firmware) of this unit
CI Plus compatib
le CAM (Conditional 
Access Module) soft ware (firmware) 
update
 1 ZDFAll DVB Channels12:55Change categoryCAM Upgrade InfoBruder0:50 - 2:30NowDolby D
EncryptedMULTI
/
DMRBS850&750EG-RQT9434-L_eng.book  98 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							99
RQT9434
Convenient functions
Other Settings
You can configure the remote control TV operation buttons to turn 
the television on/off, change the television input mode, select the 
television channel and change the television volume.
1Point the remote control at the 
television
While pressing [ ÍTV], enter the code 
with the numbered buttons.
Manufacturer and Code No.
2Test by turning on  the television and 
changing channels.
≥ Repeat the procedure until you find the code that allows 
correct operation.
≥ If your television brand is not li sted or if the code listed for 
your television does not allow control of your television, this 
remote control is not compatible with your television.
[Note]
≥ If your television brand has more than one code listed, select the 
one that allows correct operation.
The HOLD function deactivates al l buttons on the unit and remote 
control. Use it to prevent other people from operating the unit.
Press and hold [OK] and 
[RETURN ] 
simultaneously until “X 
HOLD” appears on the unit’s display.
If you press a button while the HO LD function is on, “X HOLD” 
appears on the unit’s display and operation is impossible.
To cancel the HOLD function
Press and hold [OK] and [RETURN ] simultaneously until “X 
HOLD” disappears.
Television operation
e.g., 01: [0] > [1] 10: [1]  > [0]
CH
PAGE
CHAV
TV
 DRIVE
SELECTVOL
2abc
5jkl
8
1
4
ghi
7p
3def
6mno
9w
Turn TV on/off
Input select Vo l u m eChannel 
Select
AIWA
35MITSUBISHI 05/19/20/47
BEJING 33 NEC36
BENQ 58/59 NOKIA 25/26/27/60/61
BRANDT 10/15 OLEVIA 45
CENTREX 66 ORION 05
CURTIS 05 PHILCO 41/48/64
DESMET 05 PHONOLA 05
ELEMIS 05 PROVIEW 52
FINLUX 61 RADIOLA 05
FUJITSU 53 SALORA 26
GOLDSTAR 05/50/51 SANSUI 05
GRADIENTE 36 SCHNEIDER 05/29/30
HIKONA 52 SELECO 05/25
INNO HIT 05 SIEMENS 09
ITT 25SONY 08
JVC 17/30/39/70 TELEFUNKEN 10/11/12/13/14
KOLIN 45 TEX ONDA 52
LG 05/50/51 TOSHIBA 16/57
MAG 52YAMAHA 18/41
Brand Code Brand Code
05
LOEWE 
WHITE 
WESTINGHOUSE07/46
Panasonic 01/02/03/04 METZ
05/28
AKAI 27/30 MIVAR 24
BEKO 05/71/72/73/74 NOBLEX 33
BP 09NORDMENDE 10
BUSH 05 ONWA 30/39/70
CHANGHONG 69 PEONY 49/69
DAEWOO 64/65 PHILIPS 05/06/46
DUAL 05PIONEER 37/38
FERGUSON 10/34 PYE 05
FUNAI 32/42/43/65/68
63/67 SAMSUNG
FISHER 21
SABA10
GOODMANS 05SANYO 21/54/55/56
GRUNDIG
05/69/75/76/77/7809 SEG
IRRADIO 30SINUDYNE 05
JINGXING 31/33/66/67/69
49 TCL
KDS 52TEVION 52
KONKA 62 THOMSON 10/15/44
HITACHI
05/22/23/40/41 SHARP 18
HOLD function
DMRBS850&750EG-RQT9434-L_eng.book  99 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							100
RQT9434
Additional connections
≥Connect to terminals of the same colour.
≥ Connect to terminals of the same colour.
COMPONENT VIDEO terminals can be used for either interlace or 
progressive output ( >119) and provide a purer picture than the 
VIDEO OUT terminal.
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some flickering, even if it is 
progressive compatible. Set the “Component Resolution” in Setup 
menu to “576i/480i” if you are concerned about it ( >94). This is the 
same for multi system televisions using PAL mode. ≥
Connect to terminals of the same colour.
Connecting a televi sion with AUDIO/
VIDEO terminals
Connecting a television with 
COMPONENT VIDEO terminals
[Required^setting]
“Component Resolution” setting in the Setup menu ( >94)
OPTICALCOAXIALL AUDIO OUT (PCM/BITSTREAM)COMPONENT
VIDEO OUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO IN
R         L VIDEO 
IN
Audio/Video cable
Television’s rear panel
This unit’s rear panel
OPTICALCOAXIALL AUDIO OUT (PCM/BITSTREAM)COMPONENTVIDEO OUTOUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO INR         LPRPBYCOMPONENT VIDEO IN
Component
video cable
Audio cable Television’s rear panel
This unit’s rear panel
DO NOT  
Progressive output
This unit
CRT
Connecting a stereo amplifier
OPTICALCOAXIALL AUDIO OUT (PCM/BITSTREAM)COMPONENT VIDEO OUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO IN
R         L
Audio cable
This unit’s rear panel
Amplifier’s rear panel
DMRBS850&750EG-RQT9434-L_eng.book  100 ページ  ２０１０年１月１４日　木曜日　午後４時２１分