Panasonic Dmr Bs850 Operating Instructions Manual

							31
RQT9434
Recording
Possible combination for 2 programmes simultaneous recording
To perform 2 programmes simultaneous recording, 1 programme out of the 2 needs to be recorded to the 
HDD in “DR” mode.
During the recording of an encrypted broadcast, you cannot view or record another encrypted broadcast.
[Note]
≥ 2 programmes simultaneous recording is  not possible in following conditions: 
– When “One cable” has been selected in Auto Setup ( >18, 87).
– When a single satellite cable is connected to the unit ( >17)
– 2 programmes from the external input
– While recording from DV input, or executing “Flexible Recording via AV input”
– While high speed copying
– 2 programmes on same channel cannot be recorded simultaneously by pressing [ ¥REC].
Titles recorded using CI Pl us are copyright protected.
2 programmes simultaneous recording
This function can only be used when two  satellite cables are connected to the unit ( >17) and “Two cables ( Same signal )” has been 
selected in Auto Setup ( >18, 87).
To record both programmes 
to the HDD
Digital broadcast(DR mode) and
Digital broadcastor
external input
Types of recording data fo r copyright protected titles
Copying not restricted It can be copied for indefinite generations.
≥There may be a limitation with the types of disc that can be copied to. ( >53)
One generation copy is 
permitted There are limitations with the 
types of disc that can be copied to, and the number of copies. ( >53)
≥ Original data are deleted when the recording mode is converted. ( >50)
Copying is prohibited Copy is not possible.
≥You will not be able to playback after a s pecific period has passed following recording.
≥ Playback limitation can be confirmed with Properties. ( >49)
≥ Editing, other than Delete and Properties, is not possible. ( >48)
≥ Playback/record is not possible when Automatic in Clock is set to Off. ( >95)
HDDHDD
DMRBS850&750EG-RQT9434-L_eng.book  31 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							32
RQT9434
Advanced recording
Important notes for recording
16:9 image such as 
wide broadcasting ≥When the “Rec for High Speed Copy” of the Setup menu is “On”
– Record from external equipment.
– Copy from the finalised disc (DVD-Video) to the HDD 
≥ When recording to  [-R] [-R]DL] [-RW‹V›]
≥ When copying to  [BD-RE] [BD-R] in HG, HX, HE or HL modes
≥ When converting the recording mode from DR mode to HG, HX, HE, HL, XP, SP, LP, EP or FR modes
It will be recorded in accordance to the setting of “Aspect for Recording” ( >90) in the Setup menu. 
≥ In the following cases, even when set to “Automatic” or “16:9”, recordings will be made or copied in 4:3.
– [-R]  [-R]DL]  [-RW‹V›] When the recording mode is set to “EP”  or “FR (recordings 5 hours or longer)” mode.
– When recording or copying to a +R, +R DL and +RW.
High Speed CopySpeed to copy the title recorded on the HDD to a disc  differs depending on the recording mode of the title and the 
disc to copy.
Title in DR mode
[BD-RE]  [BD-R] Title can be copied at high speed.
Title in HG, HX, HE, or HL modes
[BD-RE]  [BD-R] Title can be copied at high speed.
Title in XP, SP, LP, EP, or FR modes
[RAM] Title can be copied at high speed.
[-R]  [-R]DL]  [-RW‹V›] [+R]  [+R]DL] [+RW]
Title can be copied at high speed if “Rec for High Speed C opy” was set to “On” before the programme is recorded 
to HDD from external input. (The default setting is “On”.  >90)
But in the following cases, high speed mode does not work. – [+R]  [+R]DL]  [+RW] Titles recorded in “EP” mode and “FR (recordings 5 hours or longer)” mode
– [+R]  [+R]DL]  [+RW] Titles recorded in 16:9 aspect
– [-R]  [-R]DL]  [-RW‹V›] Titles recorded in 16:9 aspect using “EP” mode or “FR” (recordings 5 hours or longer) mode
DR File Conversion“DR File Conversion” is a function that converts the titles in DR mode to other recording modes.
In general, Data size of a title will be sm aller than the original title after conversion.
You can save HDD capacity by deleting the original title after conversion.
Playing the disc on 
other players[BD-RE]  [BD-R] Titles may not playback on other Blu-ray Disc player. ( >8)
[-R]  [-R]DL]  [-RW‹V›] [+R]  [+R]DL]
The disc must be finalised ( >86).
It is necessary to finalise DVD-R, etc. on this unit after re cording or copying titles to them. You can then play them 
as a commercially sold DVD-Video. Ho wever, the discs become play-only and you can no longer record or copy.
§
§
You can record and copy again if you format DVD-RW. (> 85)
[+RW]  If the disc failed to play on other equipment, we recommend you create top menu ( >86).
Recording an 
encrypted 
broadcastTo view or record an encrypted broadcast, insert the CAM  (Conditional Access Module) with Smart Card valid for 
the broadcast in the CI slot in the rear panel of the unit, and set the CI. (> 16, 19)
≥ During the recording of an encrypted broadcast, you ca nnot view or record another encrypted broadcast.
Title DR
Title DR
Title HL
Title HL Available disc space
Available disc space
Available disc space
Converting to other mode
Deleting the original data
C HG  
S
EARCH EN TER OFF MENU RE
TURN 
T 
OP MEN
 U  D
IS
PL A
 
Y
 V 
O  L ON
 A.S UR R OU N 
D MONI  T OR MOD  E 
P I
CTURE MODE  REPE 
A T OPEN D
C  IN 
9V
 
  /I  
 CD SEQUENTIAL DISC DOUBLE RE-MASTER 



 / 
 
 / 
DISC EXCHANGE  DISC SKIP 
OPEN  / CLOSE 1 2 3 4 5 Finalise
Play on other DVD equipment
Record to DVD-R, etc.
DMRBS850&750EG-RQT9434-L_eng.book  32 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							33
RQT9434
Recording
Chasing playback
Playback from the beginning of the title in the HDD, while the title is 
being recorded to the HDD.
Simultaneous rec and play
Playback the previously recorded  title while recording onto the HDD 
or timer recording onto the disc. 
1Press [DRIVE SELECT ] to select the 
HDD or BD drive.
≥ Select “BD” for any discs.
2Press [DIRECT NAVIGATOR] during 
recording.
“[” is displayed on the recording programme. 
3Press [ 3,4] to select a title and 
press [OK].
To stop play
Press [ ∫].
To exit the DIRECT NAVIGATOR screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1 Press [DIRECT NAVIGATOR] to exit the screen.
2 Press [ ∫].
[Note]
≥ “Chasing playback” and “Simultaneou s rec and play” can only be 
used with programmes of the same encoding system (PAL/NTSC).
≥ Depending on the state of the unit, playback may not be possible. 
(> 104)
Playing while you are recording
Time Remaining 45:54 (DR)HDD
Page 001/001Delete TitleEdit Title
(Grouped Titles) 
OPTION
20.03(Thu)
04.10(Sat)
04.10(Sat)29.10(Wed)
29.10(Wed) Start Time 22:46 Rec time0:01(DR)
PLAY
RETURN
Select
Social/EconomiSports Video (AVCHD)
Movie
Not ViewedAllDIRECT NAVIGATOR
Berge und Flüsse
Ausgebildet in der Antarktis
Die Rückkehr der Zombies
Soccer Digest
ZDF
KiKa
ZDFdokuk
3 sat
ZDFHelicopter Informationen
DMRBS850&750EG-RQT9434-L_eng.book  33 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							34
RQT9434
Advanced recording
§This function can only be used when two satellite cables are 
connected to the unit ( >17) and “Two cables ( Same signal )” 
has been selected in Auto Setup ( >18, 87).
Operation during Recording
Check the 
recording 
programme Press [STATUS ].
e.g., while 2 programmes simultaneous 
recording
Switch the 
input
Press [INPUT SELECT].
Switch to 
other 
channel
§
Press [
WXCH].
≥Other operation ( >20)
≥ During the recording of an encrypted 
broadcast, you cannot view or record another 
encrypted broadcast. ( >22)
Display the 
recording 
programme 
on the TV 
screenIt is necessary to display the recording 
programme onto the TV screen to perform 
operations such as pause.
≥If the input was switched:
Press [INPUT SELECT]. 
≥ If the channel was switched:
Press [ WXCH].
≥ If the drive was switched:
Press [DRIVE SELECT].
To  s t o p  
recordingIt is necessary to display the programme you 
want to stop on the TV screen. ( >above)
Press [ ∫].
≥From the start to the end of the recording is 
called one title.
To  p a u s e  
recordingIt is necessary to display the programme you 
want to pause on the TV screen. ( >above)
Press [ ;].
≥Press again to restart recording.
You can also press [ ¥REC] to restart.
(Title is not split into separate titles.)
≥ If paused while recording in DR mode, the 
paused part may become a still picture for a 
moment during playback of that programme.
Perform 2 
programmes 
simultaneous 
recording
§
Record other programme with 
steps 1–3 on page 22.
≥One of the 2 programmes needs to be digital 
broadcasting recorded with DR mode.
≥ Channel switch / input switch while performing 
2 programmes simultaneous recording will 
switch between the 2 recording programmes.
Recording programme 
displayed on the TV screen
3  KiKa  REC2
ZDF1
REC1 D
DH
Recording programme not 
displayed on the TV screen
“REC1” and “REC2” will light 
REC1 
REC2 
Unit’s display
DMRBS850&750EG-RQT9434-L_eng.book  34 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							35
RQT9434
Recording
Advanced timer recording
Timer recording of the broadcast
Recording disc: [HDD]
Recording mode: DR
Timer recording from the external equipment connected to AV1, AV2 
or AV3
Recording disc:  [HDD]
Recording mode: XP, SP, LP, EP, FR
Selection of channel is made easy by creating a Favourite of the 
channels you watch often. ( >87, Favourites Edit)
≥ You can enter up to 64 programmes up to a month in advance. 
(Each daily or weekly programme  is counted as one programme.)
Preparation
≥ Turn on the television and select the appropriate video input to suit 
the connections to this unit.
≥ Turn on this unit.
≥ Make sure that the clock settings are correct ( >95).
1Press [PROG/CHECK].
2Press [ 3,4] to select “New Timer 
Programme” and press [OK].
3Press [ 2,1] to select the items and 
change the items with [ 3,4].
≥Channel
Select the channel to record.
You can press the “Red” button (Category/AV) to change 
“AV input”, “All DVB Channels”, “Free Channels”, “Radio” or 
“Favourites1”, etc.
You can perform this operation when you select the box of 
“Channel”.
You can also select channel with the numbered buttons.
≥ Day/Date
You can select current date up to one month later minus one 
day. You can select “Date” or “Weekly” by pressing the 
“Green” button only when “Day/Date” is selected. Titles 
recorded using the same daily  or weekly timer are bundled 
and displayed as a “group” in the DIRECT NAVIGATOR 
screen ( >41) except when using Auto Renewal Recording. 
≥ Start/Stop
Press and hold [ 3,4] to alter the Start (Start time) and Stop 
(Finish time) in 15-minute increments. ≥
Mode
Recording modes and recording contents ( >29)
“XP”, “SP”, “LP”, “EP”, “FR” can be selected when “Channel” 
is selected in “AV input”.
It will be fixed to DR mode if  anything else is selected.
≥ Renew (Auto Renewal Recording)  (> 36)
≥ Input Name
Press [OK]. ( >80, Entering text)
4Press [OK].
The timer programme is stored and the timer icon (red) is 
displayed.
“F” lights on the unit’s display to indicate timer recording 
standby has been activated.
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
∫ Timer Recording using the TV Guide system 
(> 23)
∫ To release the unit from timer recording standby 
(> 36)
∫ To cancel recording wh en timer recording has 
already begun ( >36)
∫ About 2 programmes recorded simultaneously 
(> 22)
∫ Notes on timer  recording (>37)
[Note]
≥To record an encrypted broadcast, a CAM (Conditional Access 
Module) with Smart Card vali d for the broadcast is required.
Manually programming timer recording
CHDEL
Channel Name
ScheduleDrive/Mode Space
OK
RETURNPage Up
Page Down
Turn
Timer Off
Total  0/64
Timer Recording
30:30 DR
HDD FRI 23.01.2009 8:59
  Delete
New Timer Programme
Timer Recording
SAT 10.01 2009 19:10
30:24 DR
Channel 1 SAT 10.01 Day/Date
--
Stop
23:10 Start
RETURNCategory/
AV
Date/
Weekly
Input NameHDD
Drive
DR
Mode
All DVB Channels
[Prog.Name]
ZDF
HDDCategory/AV
Channel Name Schedule
Drive/Mode Space
Timer Recording
30:30 DR
HDD
FRI 23.01.2009 8:59
New Timer Programme
OKZDFHunter.\*Episode 5\* FRI  27.03
22:20 - 22:30HDD
DR
Check for available space on HDD, etc., when the “!” is 
displayed. ( >37)
Timer icon (red)
DMRBS850&750EG-RQT9434-L_eng.book  35 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							36
RQT9434
Advanced timer recording
Even when the unit is turned off, you can display the timer recording 
list by pressing [PROG/CHECK].
1Press [PROG/CHECK].
2Press [3,4] to select the programme 
and press the “Red” button.
≥ The timer icon “ F” ( > 37) will change from red to grey. 
≥ You cannot cancel timer reco rding standby mode as long as 
even one timer icon “ F” (red) remains in the timer recording 
list.
≥ Press the “Red” button again to activate timer recording 
standby. (The timer icon “ F” will change to red.)
[HDD]
If you record a programme onto HDD repeatedly everyday or every 
week using timer recording, the unit will record the new programme 
over the old one.
This function can be used only when weekly recording or daily 
recording is selected.
1Press [PROG/CHECK].
2Press [ 3,4] to select the programme 
and press [OK].
3Press [ 2,1] to select “Renew” 
column.
4Press [ 3,4] to select “ON” and press 
[OK].
[Note]
≥ If a programme set for Auto Renewal Recording is protected or 
while playback is taking place from the HDD, or while copying, the 
programme will not be overwritten. Instead the programme set for 
recording will be saved as a separate programme, and this 
programme will be the one to be overwritten when the next Auto 
Renewal Recording takes place.
≥ When there is not enough space on the HDD, the programme may 
not be recorded completely. Press [INPUT SELECT] or [
WXCH] to display the programme that 
you want to stop recording on the TV screen while 2 programmes 
are simultaneously recording.
1Press [ ∫].
e.g., 
2Press [ 2,1] to select “Yes” and 
press [OK].
≥ If you stop a timer recording, it will be cancelled. However, if 
you have already set a weekly,  daily timer recording, the 
recording will start at the next scheduled time.
To release the unit from timer recording 
standby
Auto Renewal Recording
To cancel recording when timer 
recording has already begun
Stop Recording
Ye s No
Recording [ ZDF 1 ]
OK
RETURN
Timer recording of this programme in progress.
Stop this timer recording ?
DMRBS850&750EG-RQT9434-L_eng.book  36 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							37
RQT9434
Recording
Even when the unit is turned off, you can display the timer recording 
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
∫To change a programme
Press [ 3,4] to select the programme and press [OK]. ( >35, 
step 3)
∫ To delete a programmePress [ 3,4] to select the programme and press [DEL].
∫To exit the timer recording listPress [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer 
recording list at 4 a.m. two days later. ≥
Only 1 programme can be set to timer recording on the disc.
≥ Timer recording will not be perf ormed if the clock is not set.
≥ If the “TV System” ( >93) in the Setup menu was modified to 
playback a disc or a title while  on timer recording standby, return 
the setting to original before the recording is started. 
≥ Timer recordings are activated regardless of whether the unit is 
turned on/off.
≥ Timer recordings begin when the set time is reached even when 
playing. Depending on the state  of the unit, playback may stop 
when recording begins.
≥ Timer recordings do not begin while copying in normal speed 
mode.
≥ The timer recording starts, whether the unit is turned on or off. 
When the recording starts with the unit turned on, if you should turn 
the unit off the recording status is not affected.
≥ When you programme successive timer recordings to start 
immediately one after the other, last 1 minute of earlier programme 
will not be recorded unless it can perform 2 programmes 
simultaneous recording. 
≥ If timer recordings overlap around the same time, some 
programmes will not be recorded depending on the set timer 
recordings. As for programmes wi th “ ” displayed on the timer 
recording list screen, some portion or all of the programmes cannot 
be recorded. Press [PROG/CHECK] to confirm. ( >left)
≥ It is not possible to simultaneously record multiple programmes 
from encrypted broadcasts.
Starting of the timer recording while executing other operation 
( > 104)
Check, change or delete a programme
F Red: Timer recording standby is activated.
Grey: Timer recording standby is not activated.
[ This programme is currently recording.
Part or all of the programme will not be recorded since 
the programme is overlapping. 
The disc was full so the programme failed to record.
The programme was copy-protected so it was not 
recorded.
The programme did not complete recording because of 
some reason.
Timer programmes set to Auto Renewal Recording 
(> 36).
The timer recording of the encrypted broadcast is 
overlapping another programme.
OK: Displayed if the recording can fit in the remaining space.
>  (Date): For recordings made daily or weekly, the display will 
show until when recordings can be made (up to a 
maximum of one month from the present time) based on 
the time remaining on the disc.
! :  It may not be possible to record because:
≥there is not enough space left.
≥ the number of possible titles  has reached its maximum. 
( > 29)
≥ programmes are deactivated.
Channel Name Schedule Drive/Mode Space
New Timer Programme
OK
RETURNPage Up
Page DownCHTurn
Timer OffTotal  4/64
Timer Recording 75:15 DR
HDD
OK
OK
FRI 27.03.2009 21:41
DEL  Delete
KiKa
   Factory Tour
ZDF
   Bruder
ZDFdokuk
   Bowling Biographie
ZDF
   Duell des Nachmittags WED  27.05
22:20 - 23:45
FRI  27.03
10:40 - 12:00
FRI
22:30 - 23:25
FRI  27.03
21:30 - 23:30HDD
DR
HDD DR
HDD DR
-->24.04
HDD DR



Notes on timer recording
Not recordedProgramme
Recorded Recorded Programme
DMRBS850&750EG-RQT9434-L_eng.book  37 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							38
RQT9434
Advanced timer recording
Press [GUIDE] to switch between Landscape view and Portrait 
view.This function lets you display a TV Guide list sorted by programme 
type (e.g. Movie, Sport) or Category (e.g. TV, Radio).
1From the desired programme type
Press the “Yellow” button to display 
the list of pr
ogramme type.
From the desired Category
Press the “Blue” button to display the 
list of category.
2Press [3,4] to select the desired 
item.
3Press [OK].
≥ A list appears with all programmes of the selected item.
≥ When you select the Landscape view, the unit displays 
programmes in grey that do not belong to the selected 
programme type.
[Note]
The broadcasters allocate indi vidual programmes to topic areas. 
This function does not work proper ly unless the information which 
distinguishes the programme type  and profiles sent from broadcast 
stations is correct.
4Press [ 3,4,2,1] to select the 
programme.
To return to the previous TV Guide list before you have selected 
the programme type or Category
Select “All Types” of the programme type or “All DVB Channels” of 
the Category in step 2. ( >above)
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
≥ TV Guide data is downloaded automat ically while the unit is turned 
on.
If the unit is turned off at the spec ified time, the TV Guide data is 
downloaded automatically. ( >95)
≥ Depending on the state of the unit, data is not downloaded during 
2 programmes simultaneous recording and the like.
≥ You cannot download TV Guide data during recording when “One 
cable” has been selected in Auto Setup ( >18, 87).
Operations in the TV Guide system
Basic operations
Landscape view
Portrait view
To change channels Landscape view Press [3,4] to select a channel.
Portrait view
Press [ 2,1] to select a channel.
The TV Guide list appears for this channel.
To view a programme 
list for another day ≥
Jump ahead 24 hours
Press the “Green” button to jump ahead 
by one day.
≥ Jump back 24 hours
Press the “Red” button.
You can only jump back to the current 
date. Past information cannot be viewed.
When jumping, the selected time period 
may deviate.
To browse through 
the TV Guide list Press [
WXCH].
To see programme 
information
(Programmes with the   symbol) Press [STATUS ].
Additional information (programme name, 
programme duration, broadcast time, 
description) is available for these 
programmes.
Press [
3,4] to scroll up and down.
To show other pages
Press [CH W] (Previous) or [ XCH] (Next).
Press [STATUS ] again to return to the 
programme list.
Landscape
WED, 27.05.2009  WED 27.05.2009 14:54
All  DVB Channels
All Types
OPTIONPage Down Page Up+24 hours
-24 hoursProg. TypeCategory
Time: 23:00 23:30 0:00 0:30 1:00
1 ZDF
2 3 sat
3 KiKa
3 KiKa
5 ZDFdokuk
7 DKULTUR 6 ZDFtheat 4 ZDFinfok Factory Tour
Unser Auto
Ökosystem Savanne
PLATINUM/MARS Hier ist die Familie
Planète insolite
Kontakt mit der Polizei 24 Stunden
Sonderberichte
GUIDECH
Hunter. \*Episode 5\*
Frankfurt
Valley News Bruder
23:00-23:45  Factory Tour
Wandern im Wald
InfoSelect Channel
Select Programme OK
RETURNChange display mode
Portrait
WED, 27.05.2009  WED 27.05.2009 14:54
All  DVB Channels
All Types
OPTIONPage Down Page Up+24 hours
-24 hoursProg. TypeCategoryGUIDECHInfoSelect Programme 
Select Channel
OK
RETURNChange display mode
ZDFtheat
ZDFdokuk
KiKa23:00-23:45
23:45-01:30
01:30-02:00
02:00-03:45
03:45-05:30
05:30-06:00
06:00-08:00ZDFinfokFactory Tour
Unser Auto
News
Healing Raum
Mythologie
News
Brot-Fabrik
08:00-10:15 Solar System3 sat
Selecting the programme from the desired 
programme type or Category
TV Guide data download
All TypesMovie
EntertainmentNews
SportChildren’sMusicArt/CultureSocial/EconomicEducationLifestyle
All TypesProg.Type
All DVB ChannelsFree ChannelsPay ChannelsTVRadioFavourites1Favourites2Favourites3Favourites4
All DVB ChannelsCategory
Landscape
WED, 27.05.2009  WED 27.05.2009 14:54
All  DVB Channels
News
OPTIONPage Down Page Up+24 hours
-24 hoursProg. TypeCategory
Time: 23:00 23:30 0:00 0:30 1:00
1 ZDF
2 3 sat
3 KiKa
5 ZDFdokuk
5 ZDFdokuk
7 DKULTUR 6 ZDFtheat 4 ZDFinfok Factory Tour
Unser Auto
Ökosystem Savanne
PLATINUM/MARS Hier ist die Familie
Planète insolite
Kontakt mit der Polizei 24 Stunden
Sonderberichte
GUIDECH
Hunter. \*Episode 5\*
Frankfurt
ValleyNews
Bruder
23:50-3:00  
Sonderberichte
Wandern im Wald
InfoSelect Channel
Select Programme OK
RETURNChange display mode
e.g., 
Programme type, 
“News” is selected in 
step 2 of Landscape 
view.
DMRBS850&750EG-RQT9434-L_eng.book  38 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							39
RQT9434
Playing back
Advanced playbackPlaying back
[Note]
≥ When playing back a title recorded on the HDD, BD-RE or BD-R, ensure that you match the “TV System” setting to the recorded tit le (>93).
≥ A disc or title with different “TV System” ( >93) may not be able to playback while recording or on standby for the timer recording. You will be 
able to playback by changing the “TV System” settings in that case, but to prevent failure of the timer recording, change back  the settings before 
the recording starts.
≥ Depending on the disc, it may take time for the menu screen, pictures, sound, etc. to start.
≥ The producer of the disc can control how discs are played. So yo u may not always be able to control play as described in these operating 
instructions. Read the disc’s instructions carefully.
≥ Discs continue to rotate while menus are displayed. Press [ ∫] when you have finished playback to protect the unit’s motor, your television 
screen and so on.
[HDD]  [BD-RE]  [BD-R] [BD-V]  [RAM] [-R] [-R]DL]  [-RW‹V›] [+R]  [+R]DL]  [+RW] [-RW‹VR›]  [DVD-V] [AVCHD]  DivX
≥ Depending on the media, some operations may not be possible.
≥
Refer to page 44 for playing DivX.
≥ Refer to page 64 for playing still pictures.
≥ Refer to page 70 for playing music.
Operation during play
StopPress [ ∫].The stopped position is memorized.
Resume play function
Press [ 1] (PLAY) to restart from this position.
≥ [BD-V]  On BD-Video discs including BD-J ( >118), the resume play function does not work.
Stopped position
≥ [HDD]  : Stopped position for each title is memorized.
≥ Discs: Only previous stopped position is memorized.
The position is cleared if the tray is opened.
≥ [AVCHD] (SD card),  DivX: Only previous stopped position is memorized.
The position is cleared if the unit is turned off.
PausePress [ ;].Press [;] again or [ 1] (PLAY) to restart play.
SearchPress [6] or [ 5].≥The speed increases up to 5 steps. ( [+R] [+R]DL]  [+RW] up to 3 steps)
≥ Press [ 1] (PLAY) to restart play.
≥ Audio is heard during firs t level search forward.
DivX : Audio is not heard during all levels search.
≥ [BD-V]  Only primary video is played wh ile performing this operation. 
Skip During play or while paused, press [ :] or [ 9].Skip to the title or chapter you want to play.
≥It will skip to the beginning of chapters ( >51) if the title contains chapters.
≥ [HDD] It will not skip the title. But the title in  the grouped titles during the “Grouped Playback” ( >42) will be 
skipped. 
≥ DivX : Press [ :] to return to the beginning of  the title currently playing.
Starting from a 
selected title
[BD-V] [DVD-V] [AVCHD]
Press the numbered buttons.Play starts from the selected title or chapter.
≥[BD-V]  [AVCHD]
Input a 3-digit number
e.g.,
5: [0]  > [0]  > [5]
15: [0]  > [1]  > [5]
≥ [DVD-V]
Input a 2-digit number
e.g.,
5: [0]  > [5]
15: [1]  > [5]
≥ While stopped (the screen on the right is disp layed on the television), the title is 
designated. While playing,  the chapter is designated.
Quick ViewExcept
[-RW‹V›] (It will not work even if it 
is finalised)
[-RW‹VR›], DivX
Press and hold [1](PLAY/ a1.3).Play speed is quicker than normal.
≥Press again to return to normal speed.
≥ Image may not be played back smoothly in case  of DR, HG, HX, HE, HL mode titles or [BD-V] [AVCHD]. 
≥ [BD-V]  Only primary video is played wh ile performing this operation. 
Slow-motionExcept DivX
While paused, press [ 6] or [5 ].The speed increases up to 5 steps.
≥Press [ 1] (PLAY) to restart play.
≥ [BD-V] [AVCHD]
Forward direction [ 5] only.
≥ The unit will pause if slow-motion play is continued for approximately 5 minutes 
(excluding  [BD-V] [DVD-V]  [AVCHD] ).
≥ [BD-V]  Only primary video is played wh ile performing this operation. 
≥ You cannot perform this operation when you playback the radio programme.
Recording
DMRBS850&750EG-RQT9434-L_eng.book  39 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							40
RQT9434
Advanced playback
[HDD] [BD-RE]  [BD-R] [BD-V]  [RAM] [-RW‹VR›]  [DVD-V]  [AVCHD]  DivX
Press [AUDIO].
It will switch depending on the cont ents recorded every time it is 
pressed. 
e.g.,  [HDD]  “Audio LR, deu” is selected.
[BD-V] [DVD-V]  [AVCHD]
You can change the audio channel number each time you press the 
button. This allows you to change things like the soundtrack 
language ( >81, Soundtrack). [HDD]
 [BD-RE] [BD-R]  
It is possible to display the subt itles during the playback if the 
programme with subtitle is recorded with DR mode.Press [STTL  ].
≥ It will switch between On/Off every time it is pressed.
[BD-V]  [DVD-V] [AVCHD]  DivX
Display with “Subtitles” in the Disc menu (> 81).
[HDD]  [BD-RE] [BD-R]  
It is possible to display the Teletext during the playback if the 
programme with Teletext is recorded with DR mode.
Press [TEXT ].
≥ It will switch between On/Off every time it is pressed.
[Note]
≥ List mode cannot be used. ( >28)
≥ Teletext cannot be displayed when the subtitle is On. ( >above)
≥ You cannot use “Skipping the spec ified time (Time Slip)”, “Manual 
Skip” or “Create Chapter” when Teletext is being displayed.
Frame-by-frameExcept  DivX
While paused, press [ 2] (2; ) or [ 1] (;1 ).Each press shows the next frame.
≥Press and hold to change in succession forward or backward.
≥ Press [ 1] (PLAY) to restart play.
≥ [BD-V] [AVCHD] Forward direction [ 1] (;1 ) only.
≥ [BD-V]  Only primary video is played  while performing this operation. 
≥ You cannot perform this operation when you playback the radio programme.
Skipping the 
specified time 
(Time Slip)
Except [BD-V] [DVD-V]  [AVCHD], 
DivX
1 Press [TIME SLIP].
2 Press [ 3,4] to select the time and press [OK].
Play skips the specified time.
≥ Each time you press [ 3,4], the time increases [ 3] or decreases [4] by 1 minute intervals. (Press and 
hold for 10-minute intervals.)
Manual SkipExcept [BD-V], DivX
Press [MANUAL SKIP].Each time you press, play restarts approximately 1 minute later.
AspectSwitch the aspect ratio of the screen ( >83)
Create Chapter[HDD]  [BD-RE]  [BD-R] [RAM] Chapters are divided at the point pressed. (
>51)
-5min.This automatically disappears after  approximately 5 seconds. To show the 
screen again press [TIME SLIP] again.
Changing audio during play
Audio LR
deu
PLAY DDH
Soundtrack1 ENGDigital  3/2.1ch
e.g., English is selected.
Display the subt
itle during play
Display the Teletext during play
When playing DVD-R DL (Dual Layer, single-sided) and 
+R DL (Double Layer, single-sided)
DVD-R DL (Dual Layer, single-sided) and +R DL (Double Layer, single-
sided) discs have two writable laye rs on one side. If there is not enough 
space on the first layer to record a programme, the remainder is recorded 
on the second layer. When playing a ti tle recorded on both layers, the unit 
automatically switches between layers  and plays the title in the same way 
as a normal programme. However, video and audio may momentarily cut 
out when the unit is switching layers.
DVD-R DL
+R DL
(Inner section of the disc) (Outer section of the disc) The available space
Title 1 Title 2
Playback direction
Second recordable layer
When switching layers:
Video and audio may momentarily cut
First recordable layer
DMRBS850&750EG-RQT9434-L_eng.book  40 ページ  ２０１０年１月１４日　木曜日　午後４時２１分