Panasonic Dmr Bs850 Operating Instructions Manual

							61
RQT9434
With Other 
Equipment
Recording disc:  [HDD] [BD-RE]  [BD-R] [RAM]  [-R] [-RW‹V›] [+R]  [+RW] 
Recording mode: XP, SP, LP, EP
Preparation
1 Turn off this unit and DV equipment, then connect the equipment 
with the unit’s DV input terminal ( >60).
2 Turn on this unit.
≥ If you record to a disc, insert a disc ( >15).
≥ [BD-RE]  [BD-R] [RAM] If the disc is protected, release protection 
( > 84, Setting the protection).
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >93).
1Turn on the DV equipment, and pause 
play at the point you  want recording to 
start.
The following screen appears.
≥ When the screen is not displayed
2Press [ 3,4] to select “Rec to HDD” 
or “Rec to Blu-ray Disc / DVD” and 
press [OK].
≥ It may take a while for the next screen to display while 
preparing to record. 
3Press [REC MODE] to select the 
recording mode.
≥DR, HG, HX, HE, HL and FR mode cannot be selected. 
4Press [ 2,1] to select “Start” and 
press [OK].
Recording starts.
To stop recording
Press [ ∫].
[Note]
≥ When this unit is in EXT LINK  standby (“EXT-L” is shown on the 
unit’s display), this function does not work.
≥ Only one piece of DV equipment (e.g., Panasonic’s video camera, 
etc.) can be connected to the unit via the DV input terminal.
≥ It is not possible to operate the unit from the connected DV 
equipment.
≥ The DV input on this unit is for use with DV equipment only. (It 
cannot be connected to a computer, etc.)
≥ The DV equipment name may not be shown correctly.
≥ Depending on the DV equipment, the images or audio may not be 
input properly.
≥ The date and time information on the tape of the DV equipment will 
not be recorded.
≥ You cannot record and play simultaneously.
≥ [-R]  [+R]  It may not be able to record after repeating about 30 times 
of step 4 or recording or editing. 
≥ [-R]  [-RW‹V›] After finalising, chapters fo r every 5 minutes will be 
created.
≥ [+R]  After finalising, chapters for every 8 minutes will be created.
≥ [+RW] Regardless of creating top menu, chapters for every 
8 minutes will be created. Recording disc: [HDD]
 [BD-RE] [BD-R] [RAM] [-R]  [-RW‹V›] [+R] [+RW] 
Recording mode: FR
It is possible to record from equipment connected to the AV input 
terminals. 
Preparation
≥ [BD-RE]  [BD-R] [RAM] If the disc is protec ted, release protection 
( > 84, Setting the protection).
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >93).
1While stopped
Press [INPUT SELECT] to select the 
input channel for the equipment you 
have connected.
e.g., If you have connected to AV3 input terminals, select 
“AV3”.
2While stopped
Press [FUNCTION MENU].
3Press [ 3,4] to select “Others” and 
press [OK].
4Press [ 3,4] to select “Flexible 
Recording via AV  input” and press 
[OK].
5Press [ 3,4] to select “Rec to HDD” 
or “Rec to Blu-ray  Disc / DVD” and 
press [OK].
≥ It may take a while for the next screen to display while 
preparing to record. 
6Press [ 2,1] to select “Hour” and 
“Min.” and press [ 3,4] to set the 
recording time.
≥ You cannot record more than maximum recording time.
7Start play on the other equipment.
8When you want to start recording
Press [ 2,1] to select “Start” and 
press [OK].
To exit the screen without recording
Press [RETURN ].
To stop recording partway
Press [ ∫].
To show the remaining time
Press [STATUS ].
[Note]
≥ When this unit is in EXT LINK standby (“EXT-L” is shown on the 
unit’s display), this function does not work.
≥ [-R] [+R]  It may not be able to record after repeating about 30 times 
of step 8 or recording or editing. 
≥ [-R]  [-RW‹V›] After finalising, chapters  for every 5 minutes will be 
created.
≥ [+R]  After finalising, chapters for  every 8 minutes will be created.
≥ [+RW] Regardless of creating top menu, chapters for every 
8 minutes will be created.
DV Automatic Recording
After performing step 1
1 Press [FUNCTION MENU].
2 Press [ 3,4] to select “Others” and press [OK].
3 Press [ 3,4] to select “DV Automatic Recording” and 
press [OK].
>  Go to step 2
If the DV automatic recording function does not work properly, 
check the connections and DV equipment settings, and turn the unit 
off and back on.
If that does not work, follow the instructions for manual 
recording ( >60).
DV Automatic Recording
Rec to Blu-ray Disc/DVDRec to HDD
Record from the DV unit?
OK
RETURN
Flexible Recording via AV input
RETURN
OK
Flexible Recording via AV input
Please set recording time. Record in FR mode.
Maximum recording time
Set recording time
Hour8Min.00StartCancel
8 hour 00 min.
DMRBS850&750EG-RQT9434-L_eng.book  61 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							62
RQT9434
Copy the HD Video (AVCHD format) or the SD Video (MPEG2 format)
It is possible to copy the HD video (AVCHD format) recorded on the Panasonic’s video camera, etc. to the HDD or disc.
∫From an SD card or Discs
1Insert a disc or card.
≥Display items differ depending on what is recorded in each 
media. 
2Press [ 3,4] to select “Copy Video 
( AVCHD )” and press [OK].
3When copying from an SD card
Press [ 3,4] to select “Copy to HDD” 
or “Copy to Blu-ray Disc” and press 
[OK].
4Press [ 3,4] to select the title and 
press the “Red” button.
A check mark is displayed. Repeat this step until you select all 
necessary titles.
≥ Press the “Red” button again to cancel.
(All the recordings on the same date become a title.)
5Press [OK].
6Press [ 2,1] to select “Start” and 
press [OK].
It will automatically format th e unformatted disc, such as new 
disc, when copying.
∫ From a video equipment
1Connect the Panasonic’s video 
camera, etc. to this unit.
2Select the appropriate mode that 
makes the Panasonic’s video camera 
ready for data tran sfer (such as “PC 
CONNECT”) on the Panasonic’s video 
camera, etc.
≥ Refer to the camera’s operating instructions for detail.
≥ Display items differ depending on what is recorded in the 
USB device.
3Press [ 3,4] to select “Copy Video 
( AVCHD )” and press [OK].
4Press [ 3,4] to select “Copy to HDD” 
or “Copy to Blu-r ay Disc” and press 
[OK].
5Press [ 3,4] to select the title and 
press the “Red” button.
A check mark is displayed. Repeat this step until you select all 
necessary titles.
≥ Press the “Red” button again to cancel.
(All the recordings on the same date become a title.)
6Press [OK].
7Press [ 2,1] to select “Start” and 
press [OK].
It will automatically format the unformatted disc, such as new 
disc, when copying.
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [BD-RE]  [RAM] [-R]  [-R]DL] [-RW‹V›]  [+R] [+R]DL]  [+RW]
Press [ 3,4] to select “Blu-ray Disc / DVD” and press [OK].
[SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK]. [Note]
≥
Record, playback, or timer reco rding cannot be executed while 
copying. 
≥ Copy cannot be executed while recording or playback.
≥ An AVCHD title with more than 100 scenes will be divided into titles 
every 99th scene and copied.
≥ Copied video will be displayed as “AVCHD” in the “Channel” 
column of the DIRECT NAVIGATOR screen. 
≥ Depending on the recording condition with the high definition 
camera, scenes recorded on same day might have different titles 
(“-1”, “-2” appended to date). 
≥ See the instructions of the equipment used to record.
≥ After copying AVCHD to HDD, it can be copied to DVDs with 
standard definition quality. It is not recommended to delete original 
AVCHD.
Copying HD Video (AVCHD format)
[AVCHD] (Disc) > [HDD]
[AVCHD] (SD card) >  [HDD] [BD-RE] [BD-R]
HDD
BD-RE   BD-R HDD
e.g., [SD]
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
Copy Video ( AVCHD )
OKRETURNPage 01/01
Time       18:19
Rec time 
                 0:10
Size        120 MBDayDateNo. Channel Time Title Name
OPTION
01.01 01.01 1:35
12:36
1:13
SUN SAT
SAT
SUN
25.05
25.05 12:37
001
002
003
004
HDDSDDestination Capacity:   472583MBSize:         0MB(  0%)Total :     0
Select
HDD of Panasonic’s video camera, etc. 
> [HDD] [BD-RE] [BD-R]
≥ You cannot playback HD Video in  the HDD of Panasonic’s video 
camera, etc. with this unit.
You must copy the files to the HDD or disc.
USB connection cable 
(specified cable such as  accessory of the USB 
equipment)
Preparation
Turn on both this unit and the Panasonic’s video camera, etc.
HDD
BD-RE   BD-R
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
DMRBS850&750EG-RQT9434-L_eng.book  62 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							63
RQT9434
With Other 
Equipment
It is possible to copy the SD video (MPEG2 format) recor ded on the Panasonic video camera, etc. to the HDD or disc.
∫From an SD card
1Insert a card.
≥Display items differ depending on what is recorded in the 
card.
2Press [ 3,4] to select “Copy Video 
( MPEG2 )” and press [OK]. 
3Press [ 3,4] to select “Start 
Copying” and press [OK].
How to copy
Refer to “Copying using  the copying list—Copy” ( >56)
Please set the items in step 3 and 4 as shown below.
Copy Direction:
Source : SD CARD
Copy Mode: 
Format : VIDEO
≥ SD Video on an SD card are automatically registered on the 
copy list.
4Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
∫ From a video equipment
1Connect the Panasonic’s video 
camera, etc. to this unit.
2Select the appropriate mode that 
makes the Panasonic’s video camera, 
etc. ready for data transfer (such as 
“PC CONNECT”) on the Panasonic’s 
video camera, etc.
≥Refer to the camera’s operating instructions for detail.
≥ Display items differ depending on what is recorded in the 
USB device.
3Press [ 3,4] to select “Copy Video 
( MPEG2 )” and press [OK]. 
4Press [ 3,4] to select “Start 
Copying” and press [OK].
How to copy
Refer to “Copying using  the copying list—Copy” ( >56)
Please set the items in step 3 and 4 as shown below.
Copy Direction:
Source : USB
Copy Mode: 
Format : VIDEO
≥ SD Video on the Panasonic’s video camera, etc. are 
automatically registered on the copy list.
5Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK]. [Note]
≥
You cannot playback SD Video on an SD card or in the HDD of the 
Panasonic’s video camera, etc. with this unit. You must copy the 
files to the HDD or a DVD-RAM.
≥ You cannot playback or record while copying SD Video.
Copying SD Video (MPEG2 format)
[SD]  >  [HDD] [RAM]
(All the recordings on the same date become a title.)
HDD
DVD-RAM 
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
HDD of Panasonic’s video camera  > [HDD] [RAM]
(All the recordings on the same date become a title.)
USB connection cable 
(specified cable such as accessory of the USB 
equipment)
Preparation
Turn on both this unit and the camera.
HDD
DVD-RAM
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
DMRBS850&750EG-RQT9434-L_eng.book  63 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							64
RQT9434
Playing still picturesStill pictures
Still pictures
[HDD] [BD-RE]  [RAM] [-R]  [-R]DL] [CD] [USB]  [SD]
≥ You can play still pictures recorded with a computer onto a BD-RE, 
DVD-R, DVD-R DL, CD-R/CD-RW, USB memory and SD card.
≥ You cannot play still pictures  while recording or copying.
1[HDD]
Press [FUNCTION MENU].
[BD-RE] [RAM] [-R]  [-R]DL] [CD]  [USB] [SD]Insert the disc, the SD card or USB memory.The display below automatically appears.
≥Display items differ depending on what is recorded in each 
media.
2Press [ 3,4] to select “Play Pictures 
( JPEG )” and press [OK].
∫ Switching the Picture View appearance[HDD]  [BD-RE]  [RAM]
Still pictures copied from SD cards and USB memories are 
grouped by the shooting date on Pictures by Date screen.
1 Press [OPTION].
2 Press [ 3,4] to select “View Album” or “Pictures by Date” 
and press [OK].
3Press [ 3,4,2,1] to select the 
album of “Album” or date of “Pictures 
by Date” and press [OK].
≥ Picture list screen is displayed.
Picture View screen icons
To show other pages
Press [ :, 9].
4Press [ 3,4,2,1] to select the still 
picture and press [OK].
≥ Press [ 2,1] to display the previous or next still picture.
≥ Useful functions during  still picture play (>65)
To return to previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
If the menu screen ( >left) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [BD-RE]  [RAM] [-R]  [-R]DL] [CD]
Press [ 3,4] to select “Blu-ray Di sc / DVD” and press [OK].
[SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK].
CD
OK
RETURN
 
Slect file type.
Play Video ( DivX )
Play Pictures ( JPEG )
Play / Copy Music ( MP3 )
SD Card
OK RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
USB
OKRETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
[SD]
[USB]Disc
e.g., [CD]
Pictures by Date screen 
04.02.2007
To t a l  9
08.09.2006
To t a l  1 9
RETURN OK
SlideshowOPTIONPress OK to display pictures.
Picture View Pictures by Date
Page 01/01
001 002
Select
Album screen
Picture ViewAlbum
RETURN OKOPTION Slideshow
001002
To t a l  9
To t a l  1 9
Press OK to display pictures.
Page 01/01Select
Picture and Album protected.
[HDD]
Date that has not yet been viewed 
(Only still pictures copied with “Copy All Pictures 
( JPEG )” or “Copy New Pictures ( JPEG )”)
04.02.2007
Picture View
Page 001/001RETURN OKOPTION SlideshowSelect
Pictures by Date
e.g., [HDD]
Picture list screen
DMRBS850&750EG-RQT9434-L_eng.book  64 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							65
RQT9434
Still pictures
§To switch the “Album” or “Pictures by Date” (>64, step 2) 
Useful functions during still picture play
Sta r t  
SlideshowYou can display still pictures one by one at a constant interval.
1 Press [3,4 ,2 ,1] to select the album or date.§
2 Press [ 1](PLAY).
You can also start Slides how with following steps.
After performing step 1 ( >above)
1 Press [OPTION].
2 Press [ 3,4] to select “Start Slideshow” and press [OK].
To end the slide show 
Press [RETURN ].
Slideshow 
Settings1 Press [ 3,4 ,2 ,1] to select the album or date.§
2 Press [OPTION].
3 Press [ 3,4 ] to select “Slideshow Settings” and press [OK].
4 After completing the following settings, press [3, 4,2,1 ] to 
select “Set” and press [OK].
≥ To change the display interval
After performing steps 1–3
1 Press [ 3,4] to select “Display Interval”.
2 Press [ 2,1] to select the desired interval.
≥ To change the transition effect
After performing steps 1–3
1 Press [ 3,4] to select “Transition Effect”.
2 Press [ 2,1] to select the transition effect.
“Fade”: Pictures are changed by fading out and fading in.
“Motion”: Pictures are changed by fading out and fading in , while it is enlarged, reduced, or moved up or down.
“Random”: In addition to the “Motion”, pictures are changed by various methods.
≥ To set repeat play
After performing steps 1–3
1 Press [ 3,4] to select “Repeat Play”.
2 Press [ 2,1] to select “On” or “Off”.
≥ To playback the music
Sample music in this unit or music stored on the HDD (My Favourites or Playlists) ( >71) or the USB can be played 
during the playback of the slideshow.
After performing steps 1–3
1 Press [ 3,4] to select “Soundtrack”.
2 Press [ 2,1] to select “On”.
≥ To change the music to playback
1 Press [ 3,4] to select “Select Soundtrack” and press [OK].
2 Press [ 3,4] to select the storage location and press [OK].
3 Press [ 3,4] to select the music playlist and press [OK].
Rotate RIGHT
Rotate LEFTWhile playing
1 Press [OPTION].
2 Press [ 3,4 ] to select “Rotate RIGHT” or “Rotate LEFT” and press [OK].
≥Rotation information will not be stored in the following cases.
–[-R] [-R]DL]  [CD] [USB]  Still pictures
– When disc or card is protected
– When played on other equipment
– When copying pictures
– When changing date
≥ If you remove the SD card while the Picture View screen is  displayed, picture rotation information may not be properly 
stored. Remove the SD card after you exit the Picture View screen.
Zoom in
Zoom outWhile playing
1 Press [OPTION].
2 Press [ 3,4 ] to select “Zoom in” and press [OK].
≥Press [ 3,4] to select “Zoom out” in step 2 and press [OK] to resume the display size of the still 
picture. 
≥ When zooming in, the picture may be cut off.
≥ The Zoom in information will not be stored.
≥ This function is only available for small-sized still pictures.
PropertiesInformation (e.g., time and date) is shown.
1 Press [ 3,4 ,2 ,1] to select the album or date and press 
[OK].§
2 Press [ 3,4 ,2 ,1] to select the still picture.
3 Press [OPTION].
4 Press [ 3,4 ] to select “Properties” and press [OK].
While playing
Press [STATUS ] twice.
To exit the picture properties screen
Press [STATUS ].
Slideshow SettingsStart Slideshowe.g,
Slideshow SettingsPlease set the following functions.
RETURN
Display IntervalNormal
Repeat PlayOnTransition EffectFade
SoundtrackOff
SetSetCancelSample SoundtrackSelect Soundtrack
RETURN 
OK 
 
Select Soundtrack Please select music playlist for soundtrack. 
Sample Soundtrack
My Favourites 
01
02
03
e.g., [HDD]
Rotate LEFT Rotate RIGHTOKRETURN
e.g,
Zoom inRotate LEFT Rotate RIGHT
OKRETURN
e.g,
RETURN
OK
PropertiesFolder
Name
No.
Date
Image Size
File Size640 X  480
142 KB
Time Picture\DCIM001\

Image0001.JPG
0001
27.05.2009 WED
11 : 0 0
Shooting date
e.g., 
[HDD]
DMRBS850&750EG-RQT9434-L_eng.book  65 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							66
RQT9434
Editing still pictures
[HDD] [BD-RE]  [RAM] [SD]
≥ Editing can be done in units of pictures, albums, or dates. 
≥ You cannot edit still pictures recorded on DVD-R, DVD-R DL, CD-
R/CD-RW and USB memory.
Preparation
≥ Press [DRIVE SELECT] to select the drive.
Select “BD” for any discs. 
≥ [BD-RE]  [RAM] [SD]  Release protection ( >11, 84, Setting the 
protection).
1[HDD]
Press [FUNCTION MENU].
[BD-RE]  [RAM] [SD]Insert the disc or the SD card.The menu is automat ically displayed.
≥ Display items differ depending on what is recorded in each 
media.
2Press [ 3,4] to select “Play Pictures 
( JPEG )” and press [OK].
∫ Switching the Picture View appearance[HDD]  [BD-RE]  [RAM] 
1 Press [OPTION].
2 Press [ 3,4] to select “View Album” or “Pictures by Date” 
and press [OK].
3Editing an album or date:
Select the album or date to be edited 
and press [OPTION].
Editing a still picture:1 Select the album or date which contains the 
still picture to edit and press [OK].
2 Select the still pictures to edit and press 
[OPTION].
To show other pages
Press [ :, 9].
Multiple editing
Select with [ 3,4,2,1] and press the “Red” button. 
(Repeat.)
A check mark appears. Press the “Red” button again to 
cancel.
4Press [ 3,4] to select the operation 
and press [OK].
(e.g.,  [HDD] Pictures by Date)
(e.g.,  [HDD] Album)
(e.g.,  [HDD] Picture list in the Pictures by Date View)
(e.g.,  [SD] Album)
(e.g.,  [SD] Picture list)
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
If the menu screen ( >step 1) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [BD-RE]  [RAM]
Press [ 3,4] to select “Blu-ray Di sc / DVD” and press [OK].
[SD]
Press [ 3,4] to select “SD Card” and press [OK].
Editing still pictures (JPEG)
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
[SD]
Disc
e.g., [RAM]
DVD-RAM
DVD-RAM is inserted.
Play Pictures ( JPEG )
OK RETURN
Play Video
Copy
04.02.2007
To t a l  9
08.09.2006
To t a l  1 9
RETURN OK
SlideshowOPTIONPress OK to display pictures.
Picture View Pictures by Date
Page 01/01
001 002
Select
Pictures by Date screen 
e.g., 
[HDD]
Picture View Album
RETURN OKOPTION Slideshow
001002
To t a l  9
To t a l  1 9
Press OK to display pictures.
Page 01/01Select
e.g., [HDD]
Copy to New Album
Copy to Disc Copy to Album
Slideshow Settings
Copy 
Delete
Change Date Start Slideshow
View Album
Still pictures operation ( >67)
Useful functions dur
ing still picture 
play ( >65)
Still pictures operation ( >67)
Start Slideshow
Slideshow Settings
Copy Album
Edit Album 
Delete Album
Pictures by Date
Enter Album Name
Set up Protection
Cancel Protection
Copy to Album
Copy to New Album
Copy to Disc
Useful functions during still picture 
play ( >65)
Slideshow Settings
Properties
Copy Pictures
Edit Pictures
Delete Pictures
Pictures by Date
Start Slideshow
Change Date
Set up Protection
Cancel Protection
Copy to Album
Copy to New Album
Still pictures operation ( >67)
Useful functions during still picture play 
(
> 65)
Slideshow Settings
Edit Album
Delete Album
Start Slideshow
Set up Protection
Enter Album Name
Cancel Protection
Still pictures operation ( >67)
Useful functions durin
g still picture play 
( > 65)
Slideshow Settings
Properties
Edit Pictures
Delete Pictures
View Album
Start Slideshow
Set up Protection
Cancel Protection
Still pictures operation ( >67)
Useful functions duri
ng still picture play 
( > 65)
DMRBS850&750EG-RQT9434-L_eng.book  66 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							67
RQT9434
Still pictures
After performing steps 1–3 (>66)
§Multiple editing is possible.
[Copy to Album, Copy to New Album, Change Date : Only when the picture list is displayed]
[Note]
≥ Timer recordings do not start when performing “Copy to Album”, “C opy to New Album”, “Change Date”, “Copy to Disc” or “Copy to HDD”.
Still pictures operation
Copy to Album§
[HDD] [BD-RE]  [RAM] Copy the selected album, date, or pictures to an existing album. 1
Press [ 2,1] to select “Start” and press [OK].
2 Press [ 3,4,2,1 ] to select the destination album and press [OK].
≥The destination album with protect setting cannot be copied to. 
≥ After copying, the screen shows the Album screen automatically.
Copy to New Album§
[HDD]  [BD-RE]  [RAM] Copy the selected album, date, or pictures to new album. 1
Press [ 2,1] to select “Start” and press [OK].
2 Press [OK].
3 Press [ 2,1] to select “Yes” or “No”and press [OK].
≥If “Yes” is selected: 
You can give names to albums. ( >80, Entering text)
≥ If “No” is selected: 
Date of the first recorded picture in the  album becomes the album name automatically.
(If there is no information about the recording date, it will become “--.--.----”.)
≥ After copying, the screen shows the Album screen automatically.
Copy to Disc[HDD]  
Copy to HDD[BD-RE]  [RAM]
Press [2, 1] to select “Start” and press [OK].
Change Date§
[HDD] [BD-RE]  [RAM]
(Pictures by Date only) Change the date of a folder and move the picture in it into the folder of the changed date.1
Press [ 2,1] to select the item and press [ 3,4 ] to change.
2 Press [OK].
≥You can also change the date of a picture.
≥ Date folder of the original is maintained even if  all original pictures were deleted after changing 
the date of folder. Delete it if unrequired.
≥ If there is no folder with the changed date, a new folder will be created.
Enter Album Name[HDD]  [BD-RE]  [RAM] [SD]
(Album only) You can give names to albums.
(
> 80, Entering text)
≥ Album names input using this unit ma y not be displayed on other equipment.
Set up Protection§
Cancel Protection§
[HDD] [BD-RE]  [RAM] [SD]
(Album and picture list only) If set, this will protect the still pict
ure or album from accidental deletion.
Press [2,1] to select “Yes” and press [OK].The lock symbol appears when the still picture or album is protected.
≥Even if the protection setting is used by this unit to protect an album, the album may be deleted by 
another unit.
Delete§
Delete Album§
Delete Pictures§
[HDD]  [BD-RE]  [RAM] [SD]
Press [2, 1] to select “Delete” and press [OK].≥Once deleted, the recorded contents are lost and cannot be restored.  Make certain before 
proceeding.
≥ [BD-RE]  [RAM]  [SD] If there is a file other than DCF format or  other folder exists in the date or album, 
only the pictures will be deleted, and the date  or the album itself will not be deleted. 
DMRBS850&750EG-RQT9434-L_eng.book  67 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							68
RQT9434
Copying still pictures
[HDD] [BD-RE]  [RAM] [USB]  [SD]
≥ Pictures copied from SD card a nd USB memory will be categorised 
according to the shooting date. Pi ctures without shooting date will 
be categorised using the creation date. 
≥ The pictures recorded on DVD-R, DVD-R DL, CD-R/CD-RW 
cannot be copied.
≥ If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum ( >116), copying will 
stop partway through.
≥ You cannot copy the information about the picture rotation.
≥ Timer recording will not start  while copying still pictures. 
 
[SD] > [HDD]  
This unit saves information about imported still pictures. Therefore, if 
still pictures are imported from the same SD card, then only new still 
pictures will be imported.
1While stopped
Insert the SD card. The menu is automat ically displayed.
≥ Display items differ depending on what is recorded in the 
card.
2Press [ 3,4] to select “Copy Pictures 
( JPEG )” and press [OK].
3Press [ 2,1] to select “Copy” and 
press [OK].
≥ Protection of the card is 
– Set: Copy will start
– Not set: Go to step 4
4Press [ 2,1] to select “Copy & 
Delete” or “Copy Only” and press 
[OK].
If “Copy & Delete” is selected
Copied pictures in the SD card will be deleted after copying. 
If “Copy Only” is selected
Pictures will not be deleted. 
≥  will be displayed on the Pictures by Date screen of the 
Picture View for the added pictures.
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 Press [ 3,4] to select “SD Card” and press [OK].
[Note]
≥ This unit saves the information on up to 12,000 still pictures and 30 
SD cards. If additional still pictures are imported, then the older 
information will be deleted.
 
[USB]  > [HDD]  
1While stopped
Insert the USB memory.The menu is automatically displayed.
≥Display items differ depending on what is recorded in the 
USB memory. 
2Press [ 3,4] to select “Copy Pictures 
( JPEG )” and press [OK].
3Press [ 2,1] to select “Copy” and 
press [OK].
≥  will be displayed on the Pictures by Date screen of the 
Picture View for the added pictures.
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2Press [ 3,4] to select “USB” and press [OK].
[Note]
≥ The structure of folders on the USB memory may not be the same 
at the copy destination.
[HDD]  ,-. [BD-RE]  [RAM] [SD]  
[SD]  ,-.  [BD-RE]  [RAM] 
[USB]  > [HDD]  [BD-RE]  [RAM] 
1While stopped
Press [FUNCTION MENU].
2Press [3,4] to select “Copy” and 
press [OK].
≥ If you are not going to change each setting (> step 6).
Copying new still pictures on the SD 
card — Copy New Pictures ( JPEG )
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
Copy added pictures ( JPEG ) by date.
CopyCancel
RETURN
OK
Copy from
SD CARD
Copy to HDD
Copy New Pictures ( JPEG )
Copying all the still pictures on the USB 
memory — Copy All Pictures ( JPEG )
Copying using the copying list
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
Copy all pictures ( JPEG ) by date.
CopyCancel
RETURN
OK
Copy from
USB
Copy to HDD
Copy All Pictures ( JPEG )
Copy
SD CARD
HDD1
2
3Source
Destination
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
SD CARD  HDD
PICTURE  High Speed
Select the copy direction.RETURN
0
DMRBS850&750EG-RQT9434-L_eng.book  68 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							69
RQT9434
Still pictures
3Set the copy direction.
≥If you are not going to change the copying direction 
(> step 4).
1 Press [ 3,4] to select “Copy Direction” and press [ 1].
2 Press [ 3,4] to select “Source” and press [OK].
3 Press [ 3,4] to select the drive and press [OK].
4 Press [ 3,4] to select “Destination” and press [OK].
5 Press [ 3,4] to select the drive and press [OK].
The same drive as the copy source cannot be selected. 
6 Press [ 2] to confirm.
4Set the copy mode.
≥If you are not going to change the recording mode 
(> step 5).
1 Press [ 3,4] to select “Copy Mode” and press [ 1].
2 Press [ 3,4] to select “Format” and press [OK].
3 Press [ 3,4] to select “PICTURE” and press [OK].
“Recording Mode” is automatically set to “High Speed”.
4 Press [ 2] to confirm.
5Register still pictures for copy.
≥If you are going to copy a registered list without making any 
changes to it (> step 6).
≥ Pictures from different dates or  albums will not be registered 
to same list. 
1 Press [ 3,4] to select “Create List” and press [ 1].
2 Press [ 3,4] to select “New Item” and press [OK].
3 Press [ 3,4] to select the item and press [OK].
Register with “By Picture ( Date )”/“By Picture ( Album )”/
“Picture” 
1 Press [ 3,4] to select “New item” and press [OK].
2 Press [ 3,4, 2,1] to select the still picture and press the 
“Red” button.
A check mark is displayed. Repeat this step until you 
select all necessary items.
≥ Press the “Red” button again to cancel.
≥ Press [ :, 9 ] to show other pages.
≥ The items will be copied in the order of the copying list. If 
you want to specify the order, repeat selecting one item 
at a time.
≥ To select another “Album” or “Date” ( >right)
3 Press [OK].
≥To edit the copying list ( >right)
4 Press [ 2] to confirm.
Register with “By Date Folder”/“By Album”/“Album” 
1 Press [ 3,4] to select “New item” and press [OK].
2 Press [ 3,4,2, 1] to select the folder and press the 
“Red” button.
A check mark is displayed. Repeat this step until you 
select all necessary items.
≥ Press the “Red” button again to cancel.
≥ Press [ :, 9 ] to show other pages.
≥ The items will be copied in the order of the copying list. If 
you want to specify the order, repeat selecting one item 
at a time.
3 Press [OK].
≥To edit the copying list (
>righ
t)
4

Press [ 2] to confirm.
6Press [ 3,4] to select “Start 
Copying” and press [OK].
≥ [Only when copied with “By Picture ( Album )” from  [HDD] to 
[BD-RE]  [RAM] [SD]  or from [BD-RE] [RAM] to  [HDD] [SD]]
When specifying another al bum as the copying 
destination, select “Album”.
7Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
To return to the previous screen in steps 1 to 7
Press [RETURN ].
To stop copying after step 7
Press and hold [RETURN ] for 3 seconds.
[Note]
≥ The sequence in which the still pict ures are registered on the copy 
list may not be the same at the copy destination.
≥ If still pictures are already cont ained inside the copy destination 
folder, the new still pictures are recorded following the existing still 
pictures.
∫ To edit the copying list
Select the item after step 5–3 ( >left)
1 Press [OPTION].
2 Press [ 3,4] to select the operation and press 
[OK].
Delete All:
Delete all items registered on the copying list.
Press [ 2,1] to select “Yes” and press [OK].
Add:
Add new items to the copying list.
1Press [ 3,4, 2, 1] to select the item and press the “Red” 
button.
A check mark is displayed. Repeat this step until you select all 
necessary items.
≥ Press the “Red” button again to cancel.
2 Press [OK].
Delete:
Delete the selected items.
Press [ 2,1] to select “Yes” and press [OK].
To cancel all registered copying settings and lists
After performing steps 1–2 ( >68, Copying using the copying list)
1Press [ 3,4] to select “Cancel All” and press [OK].
2Press [ 2,1] to select “Yes” and press [OK].
≥ The settings and lists may be cancelle d in the following situations.
– When a title or still picture has been recorded or deleted at the 
copy source
– When steps have been taken, for instance, to turn off the unit,  remove the card, open the tray, change the copy direction, etc.
∫ To select another “Album” or “Date”After performing step 5–2 [ >left, Register with “By Picture ( Date )”/
“By Picture ( Album )”/“Picture”]
1 Press [OPTION].
2 Press [ 3,4] to select “Select Album” or “Select Date” and 
press [OK].
3 Press [ 3,4,2,1] to select “Album” or “Date” and press 
[OK].
≥ The still pictures of different folders cannot be registered on the 
same list.
Copy
1
2
3
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
HDD   BD / DVD
PICTURE  High Speed
Create copy list.
0
OKRETURNOPTIONPage 01/01
Destination Capacity: 4343MBBy Picture ( Date )New ItemNew item (Total=0)No. Size Title
Destination Capacity: 4343MBBy Picture ( Date )New Item
No SizeTitle
By Picture ( Date )By Picture ( Album )By Date FolderBy Album
PictureAlbum 
e.g., [HDD] e.g., [SD]
New album
Ti di i t
Album
Add
Delete Delete All 
DMRBS850&750EG-RQT9434-L_eng.book  69 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							70
RQT9434
Playing musicMusic
Music
[-R] [-R]DL] [CD] [USB]
You can play MP3 files recorded with a computer onto a DVD-R, 
DVD-R DL, CD-R/CD-RW and USB memory.
≥ You cannot play MP3 files on t he USB memory while recording.
1While stopped
Insert a disc or USB memory.
≥Display items differ depending on what is recorded in each media. 
≥ [-R] [-R]DL] [CD] Playback will automat ically start if only MP3 is 
recorded. 
2Press [ 3,4] to select “Play / Copy 
Music ( MP3 )” and press [OK].
≥ Playback will autom atically start.
Playing different track
Press [ 3,4] to select the track and press [OK].
To exit the screen
Press [EXIT].
Playback of track will stop. 
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [-R] [-R]DL]  [CD] 
Press [ 3,4] to select “Blu-ray Disc / DVD” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK].
1While the Track List is displayed
Press [OPTION].
2 Press [ 3,4 ] to select “Select Folder” and press 
[OK].
3 Press [ 3,4,2 ,1 ] to select a folder and press 
[OK].
The Track List for the folder appears.
To return to the previous screen
Press [RETURN ]. [Note]
When this unit is not operated fo
r approximately 5 minutes during 
music playback, the screen saver  is displayed [only when the 
“Screen Saver” in the Setup menu is set to “On” ( >92)]. To return to 
the previous screen, press [RETURN ].
While stopped
Insert a music CD.The unit starts accessing the Gracenote® Database ( >75) and 
searches for the title information.
If search results indicate that multiple titles were found
Press [ 3,4] to select the appropriate title and press 
[OK].
≥ Playback will automatically start.
Playing different track
Press [ 3,4] to select the track and press [OK].
Reacquire the CD title
Press the “Yellow” button.
To exit the screen
Press [EXIT].
Playback of track will stop. 
[Note]
When this unit is not operated fo r approximately 5 minutes during 
music playback, the screen saver  is displayed [only when the 
“Screen Saver” in the Setup menu is set to “On” ( >92).]. To return 
to the previous screen, press [RETURN ].
Playing MP3 files
Using the tree screen  to find a folder
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
e.g.,  [CD] [USB] 
CD
OK
RETURN
 
Slect file type.
Play Video ( DivX )
Play Pictures ( JPEG )
Play / Copy Music ( MP3 )
Music ViewCD ( MP3 ) 0.09
 March Moon
OKRETURN
No. Track Name
Folder: Mexican pops
Artist0001 March MoonDo this flower open?
 Go to there from here
 If eastern wind has gone Good by SAKURA Leon I
Leon I
Leon I
Leon I
Leon I
0002
0003
0004
0005
Track List
OPTION
SlideshowCopy All
to HDD
Playing track
e.g., 
[CD] 
Music ViewCD ( MP3 )Select Folder 0.09March Moon
RETURN
    001 My favorite
        001 Brazilian pops
        002 Chinese pops
        003 Czech pops
        004 Hungarian pops
        005 Liner notes
        006 Japanese pops
        
007 Mexican pops        008 Philippine pops
        009 Swedish pops
            001 Momoko
    002 Standard number
001 Pi l
MP3 musicF  7/27
OK
You cannot select 
folders that contain no 
compatible files.
Selected folder No. /Total folder
If the folder has no track, “– –” is displayed as folder number.
Playing music CD
POWERED BY
Music ViewCD 0.09
 4.30
No.Track Name
Artist01
02
03
04
05
Track List March MoonDo this flower open?
March Moon
Do this flower open?
 Go to there from here
 If eastern wind has gone Good by SAKURA Leon I
Leon I
Leon I
Leon I
Leon I
OKRETURNSlideshowCopy All
to HDD
Retry accessOPTION
Playing track
DMRBS850&750EG-RQT9434-L_eng.book  70 ページ  ２０１０年１月１４日　木曜日　午後４時２１分