Panasonic Dmr Bs850 Operating Instructions Manual

							11
RQT9434
Quick Start Guide
USB memory and card information
USB memories can only be used for play back or copy to HDD or discs.
≥ Despite meeting the conditions mentioned above, there ma y be USB memories that cannot be used for this unit.
[Note]
≥ This unit’s USB port does not support bus-powered USB device.
SD cards can be used for playback, copy to  HDD or discs or copy from HDD or discs.
≥ When using SD cards 4 GB or larger, only SD  cards that display the SDHC logo can be used.
≥ Useable memory is slightly less than the card capacity.
≥ Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ If the SD card is formatted on other equipment, the time necessary for recording may be longer. Also, if the SD card is formatt ed on a PC, you 
may not be able to use it on this unit. In these cases, format the card on this unit ( >85, 118).
≥ This unit is compatible with SD Memory Cards that meet SD Card  Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in 
FAT32 format.
≥ SDHC Memory Cards used for recording with this unit can only be us ed with other SDHC Memory Card-compatible equipment. SDHC Mem ory 
Cards cannot be used with equipment that is only compatible with SD Memory Cards.
≥ We recommend using a Panasonic SD card.
≥ Keep the Memory Card out of reach of children to prevent swallowing.
∫ Setting the protectionSwitch the write-protect switch to the “LOCK” position.
USB memories you can use on this unit
Compatible USB memoriesUSB memories which are defined as USB mass storage class and digital camera that use PTP 
protocol:
– USB memories that support USB 1.0/1.1 and USB 2.0 Full Speed/High Speed.
≥ USB memories of up to 128 GB can be used.
≥ USB memories that support bulk only transfer.
CBI (Control/Bulk/Interrupt) is not supported.
≥ Digital Cameras which require additional programme  installation when connected to a PC are not 
supported.
≥ MTP (Media Transport Protocol) device is not supported.
≥ A multi-port USB card reader is not supported.
Format FAT16 and FAT32 file systems are supported.
≥UDF/NTFS/exFAT file system is not supported.
≥ Depending on the sector size, some files may not work.
≥ Only the first partition on USB memories with multi-partition is supported.
Indicated in these instructions 
by [USB]
Data that can be played
DivX, MP3, Still pictures (JPEG)
Data that can be copiedMP3
≥It can be copied to HDD.
Still pictures (JPEG)
≥ It can be copied to HDD, BD-RE or DVD-RAM.
Standard Definition (SD) Video (MPEG2 format)
High Definition (HD) Video (AVCHD format)
≥ SD Video shot with a Panasonic’s video camera,  etc. can be copied to the HDD or DVD-RAM. (>63)
≥ HD Video shot with a Panasonic’s video camera, etc. can be copied to the HDD, BD-RE or BD-R. ( >62)
Cards you can use on this unit
Ty p eSD Memory Card§1 (from 8 MB to 2 GB)
SDHC Memory Card§ 2 (from 4 GB to 32 GB)§1Including miniSD Card and microSD Card§2Including miniSDHC Card and microSDHC Card
The card types mentioned above will be referred to  as “SD card” in these operating instructions.
Indicated in these instructions 
by[SD]
Data that can be played
Still pictures (JPEG)
HD Video (AVCHD format)
Data that can be copiedStill pictures (JPEG)
≥It can be copied to/from HDD, BD-RE or DVD-RAM.
Standard Definition (SD) Video (MPEG2 format)
High Definition (HD) Video (AVCHD format)
≥ SD Video shot with a Panasonic’s video camera, et c. can be copied to the HDD or DVD-RAM. (>63)
≥ HD Video shot with a Panasonic’s video camera, etc. can be copied to the HDD, BD-RE or BD-R. (> 62)
InstructionsYou can insert directly into the SD card slot.
≥A miniSD Card, a miniSDHC Card, a microSD Card  and microSDHC Card must be used with the adaptor 
that comes with the card.
Suitable SD cards
LOCK
DMRBS850&750EG-RQT9434-L_eng.book  11 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							12
RQT9434
Control reference guide
Instructions for operations are generally described using the remote control.1Turn the unit on or off ( >18)
2 Select drive (HDD, BD or SD) ( >21)
Drive changes each time yo u press [DRIVE SELECT].
3 Select channels and title numbers, etc./Enter numbers or 
characters (The character buttons may be used when operating 
VIERA CAST contents.)
4 To delete unwanted recorded titles, timer programmes, still 
pictures or music (> 25, 37)
5 Basic operations for recording and play
6 Show digital channel information ( >27)/Programme information 
within TV Guide screen (> 38)/Show status messages ( >83)
7 Selection/OK, Select station from Channel List ( >20)/Frame-by-
frame ( >40)
8 Show DIRECT NAVIGATOR, Top menu, Pop-up Menu ( >21)
9 Show OPTION menu ( >48, 66, 73)
This menu is used when playing or editing titles and still pictures, 
etc.
: Skip the specified time ( >40)
; Colour buttons
Use in accordance with in struction on the screen. 
< Recording functions
≥ [¥ REC] Start recording ( >22)
≥ [REC MODE] Change recording mode ( >59)
= Show teletext ( >28, 40)
> Show subtitles (Subtitles can be viewed if the digital broadcast 
programme has subtitles.) ( >27)
? Transmit the remote control signal
@ Television operations ( >99)
A Channel select/Change pages in the TV Guide system 
(> 22, 38)
B Show VIERA CAST ( >78)
C Input select (TV, AV1, AV2, AV3 or DV) ( >20, 22, 59, 60)
D Show Timer Recording screen ( >35)
E Exit the menu screen
F Show  the TV Guide scr
een (

>20, 38)
G Show FUNCTION MENU window ( >13)
By using the FUNCTION MENU  window you may access the 
main functions (playback, re cording, etc.) quickly and easily.
H Return to previous screen
I Create chapter (> 51)
J Skip approx. 1 minute forward ( >40)
K Direct TV Recording (> 76)
L EXT LINK function ( >59)
M Show on-screen menu ( >81) 
N Select audio ( >27, 40)
1 Standby/on switch ( Í/I) ( >18)
Press to switch the unit from on to standby mode or vice versa. In 
standby mode, the unit is still consuming a small amount of 
power.
2 Disc tray ( >15)
3 Connection for digital video (DV) camcorder ( >60)
4 Blue LED
≥It is possible to set the LED to turn on/off. (> 92)
5 Display ( >13)
6 Recording indicator
7 Remote control signal sensor 8
Connection for VCR, Panasonic’s video camera, etc. ( >60)
9 Open/close disc tray ( >15)
: SD card slot ( >15)
; USB port ( >15)
< Channel select (> 20)
= Start recording ( >22)/Specify a time to stop recording ( >22)
> Stop ( >22, 39)
? Start play
R ear p
a

nel terminals ( >17, 100–103)
Remote control
TIME SLIP
DISPLAY
STATUS
DIRECT TV REC
AUDIO
REC MODE EXT LINKREC
TEXT STTL
CREATE
CHAPTER
FUNCTION MENU DIRECT NAVIGATOR 
 GUIDE 
RETURN
PLAY/x1.3PAUSESTOP
SLOW/SEARCHSKIP
PROG/CHECK
CH
PAGE
SELECT INPUT
CH
AV

TV
 DRIVE
SELECT

DEL
MANUAL SKIP
EXIT
OK
OPTION
VOL
0 2
abc
5jkl
8tuv
1
4
ghi
7qrs p
3def
6mno
9xyzw




 
\b
 
 \f













 
 


Main unit





Pull to flip down the front 
panel.
DMRBS850&750EG-RQT9434-L_eng.book  12 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							13
RQT9434
Quick Start Guide
1 SD card slot indicator
This indicator lights up when an SD card is inserted.
2 Linked timer recordings with  external equipment indicator
3 Copying indicator
4 Disc indicator
This indicator lights up when a disc is inserted.
5 Drive (HDD, BD or SD) indicator
Select “BD” for any discs. BD indicator will light up. 6
Remote control signal indicator
This flashes when it is operated by the remote control.
7 Main display section indicator
Current time/playback counter, various messages
8 Playback indicator
9 USB port indicator
This indicator lights up when a USB memory is inserted.
: Timer recording indicator
This indicator lights up when t he timer recording standby is 
activated.
You can access the main function quickly and easily.
Press [FUNCTION MENU].
≥ The FUNCTION MENU is displayed.
≥There are operations that cannot be performed when recording or 
when there is no media inserted. Those items are disabled for 
selection in such cases.
The unit’s display
PLAY 
EXT-L  COPY
SD USBHDDSD
BD



 
Easy access to various functions — FUNCTION MENU display
SD
TV Guide Play Video ( AVCHD )
Play Pictures ( JPEG )
Play Music
Copy
Others Play all Video
FUNCTION MENU
Blu-ray Disc / DVD
SD Card
USB
OK
RETURN
Play Video
Playlists BD-RE
Play Pictures ( JPEG )
Blu-ray Disc Management
Select for playback of disc and formatting of disc etc.
Blu-ray
OKOK
View
Select an item. Press [OK].
≥You can access the main functions via either the above 
operations or repetition of the above operations.
Play all Video ( >21)
Play Video ( AVCHD ) ( >41)
Play Pictures ( JPEG ) ( >64)
Play Music ( >71)
TV Guide ( >23)
Copy ( >26)
View ( >20)
≥“View” is displayed when this unit  is connected with the TV that 
supports “ HDAVI Control 2” or later. (> 76)
Others
Timer Recording (>35)
Ext Link Standby ( >59)
Flexible Recording via AV input ( >61)
DV Automatic Recording ( >61)
Network ( >78)
Setup ( >87)
Blu-ray Disc / DVD
SD Card
USB
Select an operation that can be executed with media such as 
discs, SD cards, or USB devices.
DMRBS850&750EG-RQT9434-L_eng.book  13 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							14
RQT9434
HDD (Hard disk drive) handling care
The HDD is a high precision recording inst rument and because of its long recording capability and high speed operation it is a  very special device 
that is easily susceptible to damage.
As a basic rule, save important content to a disc as backup.
∫ The HDD is a device that is not buil t to withstand vibration/shock or dustDepending on the setup environment and handling of the HDD some  content may become damaged and play and recording may no longer  be 
possible. Especially during operati on, do not subject the unit to any vibration, shock, or remove the AC mains lead from the ho usehold mains 
socket. In the event of a power failure during recording or play, the content may be damaged.
∫ The HDD is a temporary storage deviceThe HDD is not an everlasting storage device for recorded content.  Use the HDD as a temporary storage place for one-off viewing, editing, or 
copying. It is recommended to save the recorded content on a disc or  to keep the original data or CDs that they were copied from.
∫Immediately save (backup) all content as soon as you feel there may be a problem with the HDDIf there is an irregularity within the HDD, repetitive strange s ounds or problems with picture (block noise, etc.) may result.  Using the HDD in this 
condition may worsen the problem and in the worst case the HDD may no longer be usable. As soon as  you notice this type of problem, copy all 
content to disc and request service. Recorded content ( data) on a HDD that has become unusable is unrecoverable.
≥ When the unit is turned on or off, there may be an unexpected s ound. This does not indicate a problem with this unit.
The precision parts in this unit are readily affected by the 
environment, especially temperature, humidity, and dust. 
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
Observe the following points to ensure continued listening and 
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it 
impossible to record or play discs. 
Use the  Lens cleaner  (not included) about once every year, 
depending on frequency of use and the operating environment. 
Carefully read the lens cleaner’s instructions before use. [Note]
Do not obstruct the rear panel’s internal cooling fan.
∫
Setup precautions≥Do not place in an enclosed area where the rear cooling fan 
and the cooling vents on the side are covered up.
≥ Place the unit on a surface that is flat and not subject to 
vibration or impact.
≥ Do not place on anything that 
generates heat like a video cassette 
recorder, etc.
≥ Do not place in an area often subject to 
temperature changes.
≥ Place in an area where condensation 
does not occur. Condensation is a 
phenomenon where moisture forms on a 
cold surface when there is an extreme 
change in temperature. Condensation may cause internal 
damage to the unit.
≥ Conditions where condensation may occur
– When there is an extreme change in temperature (moving from 
a very hot location to a very cold location, or vice versa, or when 
subjected to an air conditioner or when cooled air directly 
impacts the unit). When the HDD (warms during operation) is 
subjected to cold air, condensation may form on the inside of the 
HDD and may cause damage to the HDD heads, etc.
– When there is high humidity or a lot of steam in the room.
– During the rainy season.
In the above situation,  without turning the unit on , let the unit 
adjust to the room temperature and wait 2–3 hours until 
condensation is gone.∫ Cigarette smoke etc. causes malfunction or 
breakdown
The unit may breakdown if cigarette smoke or bug spray/vapor, etc. 
gets inside the unit.
∫While operating≥Do not move the unit or subject to vibration or impact. (The HDD 
may become damaged.)
≥ Do not remove the AC mains lead from the household mains 
socket, or flip the power breaker switch.
While the unit is on, the HDD is rotating at high speed. Sound or 
movement due to rotation is normal.
∫ When moving the unit1 Turn the unit off. (Wait until “BYE” disappears from the display.)
2 Remove the AC mains lead from the household mains socket.
3 Move only after the unit has come to a complete stop (approx. 
2 minutes) in order to avoid s ubjecting to vibration and shock. 
(Even after turning the unit off, the HDD continues operating for 
a short time.)
∫ Indemnity concerning recorded contentPanasonic does not accept any responsibility  for damages directly or indirectly due to any type of problems that result in loss of recording or 
edited content (data), and does not guarantee any content if reco rding or editing does not work properly. Likewise, the above also applies in a 
case where any type of repair is made to the unit (including any other non-HDD related component).
Unit care
This unit
VCR
DO NOT
Lens cleaner: RP-CL720E
≥ This lens cleaner may not be for sale depending on the region.Before moving the unit, ensure the disc tray is 
empty.
Failure to do so will risk severely damaging the disc and the 
unit.
Do not place the unit on 
amplifiers or equipment 
that may become hot.
The heat can damage the unit.
DO NOT  
DMRBS850&750EG-RQT9434-L_eng.book  14 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							15
RQT9434
Quick Start Guide
Media handling (Disc/USB memory/SD card)
1 Press [ 
						

							16
RQT9434
STEP1Inserting the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding broadcaster.
1Insert the certified Smart Card into the comme rcially available CAM (Conditional Access Module). 
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥ You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
∫ PIN queryWhen you turn the unit on after inserting the card,  depending on the card provider, a PIN may be demanded. 
Enter the 4-digit code with the numbered buttons.
[Note]
≥ Be sure to insert the CAM horizontally into the slot.
≥ Do not insert the CAM and Smart Card upside down.
≥ For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥ The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥ Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
10BASE-T/
100BASE-TXLNBLNBIN 1IN 1LNBLNBIN 2IN 2OPTICALCOAXIALDIGITAL AUDIO OUT (PCM/BITSTREAM)AC IN COMPONENT VIDEO OUTOUTAUDIOOUT
VIDEOLR
Y
RPBPAV 1(TV)VIDEORGB/S VIDEO
AV 2  (EXT)VIDEORGB/S VIDEO
1
2
COMMON INTERFACE
13V/18V
400mA max.
CI (Common Interface) slot
CAM (Conditional Access Module)
 Smart Card
This unit’s rear panel
Adjust the position marks. Label facing upwards
DMRBS850&750EG-RQT9434-L_eng.book  16 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							17
RQT9434
Quick Start Guide
STEP  2Connection
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥ Refer to “Additional connections” ( >100) for connection using other terminals and connection with other equipment.
≥ Refer to “Network connection” ( >103) for connection network.
≥ Confirm connections not listed below with your dealer.
≥ Even when your television does not have an HDMI input terminal, y ou still can view only with the 21-pin Scart cable connection (5 ) (However, 
functions such as the “HDAVI Control
TM” function  cannot be used.)
Using a HDMI cableWhen connected to an HDMI compatible unit, an uncompressed digi tal audio and video signal is transmitted. You can enjoy high quality, digital 
video and audio with just one cord. When connecting to an HDMI-comp atible HDTV (High Definition Television), the output can be switched to 
1080p, 1080i or 720p HD video. 
≥ This unit incorporates HDMI
TM (V.1.3a with Deep Colour, x.v.ColourTM, High Bit Rate Audio) technology ( >118, 119).
≥ Video sources converted to 1920 k1080 resolution, while of high quality, will exhibit so mewhat lower subjective image resolution than true, 
native 1080p full-HD sources. See dealer for details.
≥ Please use High Speed HDMI Cables that have  the HDMI logo (as shown on the cover).
≥ When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
[Note]
≥ If you are connecting to a TV that is only compatible with  2 channel audio output, audio with 3 channels or more will be down mixed (>118) and 
output as 2 channels, even if connecting with an  HDMI cable. (Some discs cannot be down mixed.)
≥ You cannot connect this unit to DVI devic es that are incompatible with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content  Protection) copyright protection that are equipped with a digital DVI input 
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at al l when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
Using a 21-pin Scart cableYou can use a variety of Q Link functions by connecting the unit to a Q Link compatible television ( >76).
You can enjoy high-quality viewing [standard definition (SD) qualit y] by connecting the unit to an RGB compatible television (>119).
≥ Set “AV1 Output” in the Setup menu ( >94)
If the 21-pin Scart cable is connected with a Panasoni c TV (VIERA), the following functions are available.
≥ Direct TV Recording ( >76)
≥ Pause Live TV programme (> 77)
Satellite cable
≥Connect both satellite terminals (LNB IN 1 and LNB IN 2) to the sate llite dish when you want to record 2 programmes simultaneously or view 
TV during recording.
≥ Connect LNB IN 1 terminal to the satellite dish when you use only one terminal. (You cannot view if  you connect only LNB IN 2 terminal.) In 
this case, you cannot record 2 programmes simultaneously or view TV during recording.
≥ Supply power from another device when you use  2 or more devices to receive satellite broadcast, because this unit does not supp ly power 
when it is turned in standby.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This  unit consumes a small amount of power, even when it is turned of f 
[approx. 0.3 W (
“Power Save” is set to “On”)]
Regarding VIERA Link “HDAVI ControlTM” functionWhen connecting with a Panasonic TV  (VIERA) or a receiver equipped with the “HDAVI  Control” function, linked operations would be possible. 
[> 76, Linked operations with the TV (VIERA Link “HDAVI ControlTM”/Q Link)]
≥ Non-HDMI-compliant cables cannot be utilised.
≥ It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
10BASE-T/
100BASE-TX
LNB LNBIN 1
IN 1LNB
LNBIN 2
IN 2OPTICALCOAXIALDIGITAL AUDIO OUT (PCM/BITSTREAM)
13V/18V
400mA max.AC IN COMPONENT VIDEO OUT OUTAUDIOOUT
VIDEO
L
R
Y
RP
BPAV 1(TV)VIDEORGB/S VIDEO
AV 2  (EXT)VIDEORGB/S VIDEO
1
2
COMMON INTERFACE
LNB INAVHDMI IN 
3
6
4
5  
12
Television’s rear panel
Satellite cable
≥Connect the satellite 
cable if your television 
has a built-in digital 
satellite tuner. (It is not 
possible to connect the 
satellite cable directly to 
this unit.)
To household mains socket
(AC 220 to 240 V, 50 Hz)
Fully wired 21-pinScart cable
(> below)
Cooling fan
AC mains lead
(included)
Connect only after 
all other 
connections are 
complete.
HDMI cable
(
> below)
Common Interface (CI) slot
In order to view or record TV 
services, refer to “STEP 1 Inserting 
the CAM (Conditional Access 
Module) and Smart Card” ( >16).
Satellite dish
This unit’s rear panel
[Required^setting]  
≥ Set “HDMI Video Mode” and “HDMI Audio 
Output” to “On” ( >93).
(The default setting is “On”.) Satellite cable 
(
> above)
DMRBS850&750EG-RQT9434-L_eng.book  17 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							18
RQT9434
STEP 3Channel reception settings and TV aspect settings
1Turn on the television and select the 
appropriate AV input to suit the 
connections to this unit.
2Press [ Í] to turn the unit on.
Language setting screen appears on the television.
3Press [3,4] to select the language 
and press [OK].
Country setting screen appears on the television.
4Press [ 3,4] to select the country and 
press [OK].
Dish Setup screen appears on the television.
5Press [ 3,4] to select the number of 
cables to connect and press [OK].
( > 22, About 2 programmes recorded simultaneously)
≥ Two cables ( Same signal ):
Select this item when connecting two cables outputting 
same signal to both LNB IN 1 and LNB IN 2.
≥ One cable:
Select this item when connecting only one cable to 
LNB IN 1.
Search Mode screen appears on the television.
6Press [ 2,1] to select the Search 
Mode.
≥ All Channels:
Search for all channels.
≥ Free Channels:
Search for free channels only.
7Press [OK].
Auto Setup starts.
Searching Satellite  # Searching Channels
≥ These operations may take some time.
After Auto Setup is complete, the time information can be 
obtained and Power Save setting screen appears.
8Press [ 3,4] to select “On” or “Off” 
and press [OK].
≥ On:
It will go into the Power Save mode when the power is 
turned off. 
≥ Off:
It is possible to start qui ckly from standby mode. 
The features of the power save function when the unit is in 
standby mode are as follows.
§ 1“Unit’s Display” is fixed to “Automatic” in the Setup menu. 
(> 92)
§2“Unit’s Display” is changed to “Bright” in the Setup menu.§3It is possible to startup and start recording within several 
seconds.
– Depending on the type of TV or the connected terminal, it 
may take time to display the screen.
After Power Save setting is complete, TV aspect setting 
screen appears.
TIME SLIP
DISPLAY
STATUS
DIRECT TV REC
AUDIO
REC MODE EXT LINKREC
TEXT STTL
CREATE
CHAPTER
FUNCTION MENU DIRECT NAVIGATOR  GUIDE 
RETURN
PLAY/x1.3PAUSESTOP
SLOW/SEARCHSKIP
PROG/CHECK
CH
PAGE
SELECT INPUT
CHAV
TV
 DRIVE
SELECT
DEL
MANUAL SKIP
EXIT
OK
OPTION
VOL
0 2
abc
5jkl
8tuv
1
4
ghi
7qrs p
3def
6mno
9xyzw
RETURN
EXIT
FUNCTION 
MENU

,,, OK
Power SaveOn§1Off§2
Power 
consumption Approx. 0.3 W Approx. 7 W
Start up time Not Quick Quick
§3
Auto Setup
RETURN
SatelliteProgress 0% 100%
This will take up to 40 minutes.Checking LNB1
Satellite LNB in 1 LNB in 2
Press RETURN to skip Satellite installation Searching SatelliteChecking... Checking...
OK
RETURN
Power SaveOnOffOn: Minimises standby power consumption,
disables Quick Start function. Unit’s Display
is set to Automatic.
Off: Enables Quick Start function.
DMRBS850&750EG-RQT9434-L_eng.book  18 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							19
RQT9434
Quick Start Guide
9Press [ 3,4] to select the TV aspect 
and press [OK].
To  s t o p  pa r t w a y
Press [RETURN ].
1Press [FUNCTION MENU].
2Press [ 3,4] to select “Other s” and press [OK].
3Press [3,4] to select “Setup” and press [OK].
4Press [ 3,4] to select “Connect ion” and press [OK].
5Press [3,4] to select “Common Inte rface” and press [OK].
6Press [3,4] to select “Slot 1:” or  “Slot 2:” and press [OK].
The features that appear on screen are dependent on the contents of the inserted CAM and Smart Card.
Follow the on-screen instructions.
≥On-screen instructions may not correspond to the remote control buttons.
To return to the previous screen
Press [RETURN  ].
To exit the screen
Press [EXIT].
≥For more information about TV service,  please contact your service provider.
[Note]
≥ Other settings on the card, e.g. changing the pa ssword, can be adjusted in the Setup menu. (> 94)
≥ Depending on the card, in some cases its use together  with this unit may be limited or not possible.
≥
16:9 :
When connected to a 16:9 widescreen 
television
≥ Pan & Scan:
When connected to a 4: 3 aspect television, 
side picture is trimmed for 16:9 picture.
This setting may not work and the pictures 
may be shown in the letterbox style 
depending on the content.
≥ Letterbox:
When connected to a 4: 3 aspect television. 
16:9 picture is shown in the letterbox style.
When television picture appears, set up is complete.
16:9
Pan & Scan
Letterbox
4:3 TV
TV Aspect16:9 WIDE TV
OK
RETURN
∫If the clock setting menu appears (> 95, Clock)
∫ To confirm that stations have been tuned 
correctly ( >87, Channel List)
∫ To restart set up ( >87, Auto Setup)
STEP 4 Setting the CI or CI Plus (Common Interface)
Connection
OK
RETURN
TV AspectAspect for 4:3 VideoTV SystemHDMI ConnectionComponent ResolutionAV1 OutputAV2 SettingsCommon InterfaceAccess
Video
576i/480i PA L
4:3
16:9
DMRBS850&750EG-RQT9434-L_eng.book  19 ページ  ２０１０年１月１４日　木曜日　午後４時２１分 
						

							20
RQT9434
Watching digital broadcastsBasic 
operations
Refer to “Advanced watching digital broadcasts” 
(> 27).
This unit has the tuner which allows  it to directly receive and record 
digital satellite channels.
1Turn on the television and select the 
appropriate AV input to suit the 
connections to this unit.
2Press [ Í] to turn the unit on.
3Press [INPUT SELECT] a few times 
and select “TV”.
≥It will switch when the display disappears.
(It will switch faster by pressing [OK])
4Press [ WXCH] to select the channel.
Everytime you change the station, digital channel information 
appears automatically.
The length of time the digital  channel information is displayed 
can be changed. ( >92, On-Screen Messages)
Unit’s display;
≥ You can also select the channel with the numbered buttons.
∫ Select the station from Channel ListSelection of channel is made easy  by creating a Favourite of the 
channels you watch often. ( >87, Favourites Edit)
After performing steps 1–3 ( >left)
1Press [OK].Channel List is displayed.
≥Press the “Red” button to select the “Category”.
≥ Press the “Blue” button to change the sorting mode.
2Press [ 3,4 ] to select the station and press 
[OK].
∫ Select the programme to view using the TV 
Guide
Selection of channel is made easy  by creating a Favourite of the 
channels you watch often. ( >87, Favourites Edit)
After performing steps 1–3 ( >left)
1 Press [GUIDE].
≥Some digital broadcast may not send programme information.
To select channel in Category.
1 Press the “Blue” button to display the list of category.
2 Press [ 3,4] to select the desired item and press [OK].
Operations in the TV Guide system ( >38)
2Press [ 3,4 ,2, 1] to select the programme to 
view and press [OK]. 
≥ This is displayed only when the programme currently 
broadcasting is selected. 
3Press [ 3,4 ] to select “View” and press [OK].
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
e.g., 5: [0]  > [0]  > [0]  > [5]
15: [0]  > [0]  > [1]  > [5]
115: [0]  > [1]  > [1]  > [5]
1115: [1]  > [1]  > [1]  > [5]
TIME SLIP
STATUS
DIRECT TV RECREC MODE EXT LINKREC
CREATE
CHAPTER
FUNCTION MENU DIRECT NAVIGATOR  GUIDE 
RETURN
PLAY/x1.3PAUSESTOP
SLOW/SEARCHSKIP
PROG/CHECK
CH
PAGE
SELECT INPUT
CHAV
TV
 DRIVE
SELECT
DEL
MANUAL SKIP
EXIT
OK
OPTION
VOL
0 2
abc
5jkl
8tuv
1
4
ghi
7qrs p
3def
6mno
9xyzw
CH
\b
INPUT SELECT
EXIT
GUIDE
,,, OK
RETURN
Numbered
buttons
“Red” “Blue”
AV 3DVTV AV 2
AV 1
Input Selection
RETURN
Change
Select
EXIT
All DVB Channels
Sorting 1 2 3...
RETURN
Select
7 DKULTUR6 ZDFtheat5 ZDFdokuk4 ZDFinfok3 KiKa
Category
123/ABC
2 3 sat 1 ZDF
Landscape
WED, 27.05.2009  WED 27.05.2009 14:54
All  DVB Channels
All Types
OPTIONPage Down Page Up+24 hours
-24 hoursProg. TypeCategory
Time: 23:00 23:30 0:00 0:30 1:00
1 ZDF
2 3 sat
3 KiKa
3 KiKa
5 ZDFdokuk
7 DKULTUR 6 ZDFtheat 4 ZDFinfok Factory Tour
Unser Auto
Ökosystem Savanne
PLATINUM/MARS Hier ist die Familie
Planète insolite
Kontakt mit der Polizei 24 Stunden
Sonderberichte
GUIDECH
Hunter. \*Episode 5\*
Frankfurt
Valley News Bruder
23:00-23:45  Factory Tour
Wandern im Wald
InfoSelect Channel
Select Programme OK
RETURNChange display mode
Timer Rec Set
Timer Rec Edit
Timer Rec Cancel
View
Menu
DMRBS850&750EG-RQT9434-L_eng.book  20 ページ  ２０１０年１月１４日　木曜日　午後４時２１分