Panasonic Ey7546 Operating Instructions Manual

IMPORTANTThis manual contains safety information. Read manual completely before f\
irst using this product and save this 
manual for future use.
IMPORTANTCe mode d’emploi contient des informations sur la sécurité. Lis\
ez-le en entier avant d’utiliser le produit et 
conservez-le pour référence.
IMPORTANTEEste manual contiene información de seguridad. Lea completamente este\
 manual antes de utilizar por primera 
vez este producto, y guárdelo para poder consultarlo en el futuro.
Cordles Impact...

- 2 - 
FUNCTIONAL DESCRIPTION
DESCRIPTION DES FONCTIONS
DESCRIPCIÓN FUNCIONAL
Index/Index/Indice
English: Page 3 Français:  Page 16  Español:  Página 31
 
10.8 V ─ 28.8 V
(Q)
(F)
(O)
(N)(M)
(A)(B)
(C)
(D)
(E)
(G)(K)
(P)
(I)
(J)
(L)
(R)
(S)
(A) 6.35 mm (1/4″ ) hex quick connect chuckMandrin de connexion rapide hexagonal 
de 6,35 mm (1/4″) Mandril hexagonal de conexió
n rápida de   
6,35 mm (1/4″)(A)′ Square drive (ball detent)MandrinPortabroca
(B) Nose protector Protection du becProtector del morro
(C)...

- 3 -  
I.  GENERAL 
SAFETY RULES
 WARNING! Read all instructions
Failure  to  follow  all  instructions  listed 
below  may  result  in  electric  shock,  fire 
and/or  serious  injury.  The  term  “power 
tool”  in  all  of  the  warnings  listed  below 
refers  to  your  mains  operated  (corded) 
p o w e r   t o o l   a n d   b a t t e r y   o p e r a t e d 
(cordless) power tool.
SAVE THESE INSTRUCTIONS
Work Area Safety
1)  Keep work area clean and well lit.Cluttered or dark areas invite accidents....

- 4 - 
5) D o   n o t   o v e r r e a c h .   K e e p   p r o p e r 
footing and balance at all times. 
This enables better control of the power 
tool in unexpected situations.
6)  Dress  properly.  Do  not  wear  loose 
c l o t h i n g   o r   j e w e l l e r y.   K e e p   y o u r 
hair,  clothing  and  gloves  away  from 
moving parts.
Loose clothes, jewellery or long hair can 
be caught in moving parts.
7)  I f   d e v i c e s   a r e   p r o v i d e d   f o r   t h e 
connection  of  dust...

- 5 -  
2)  Be  aware  that  this  tool  is  always  in  an 
operating condition, since it does not have 
to be plugged into an electrical outlet.
3)  Hold  power  tools  by  insulated  grip­
ping  sur  faces  when  performing  an 
operation  where  the  cutting  tool  may 
contact hid  den wiring.
  Contact  with  a  “live”  wire  will  make  ex-
posed  metal  parts  of  the  tool  “live”  and 
shock the operator.
4) If the bit becomes jammed, immediately 
turn  the  trigger  switch  off  to  prevent...

- 6 - 
b. extension  cord  is  properly  wired  and 
in good electrical condition.
c.  wire  size  is  large  enough  for  ampere 
rating of charger as specified below.
RECOMMENDED MINIMUM AWG SIZE OF
EXTENSION CORDS FORBATTERY CHARGERS
AC Input Rating. AmperesAWG Size of Cord
Equal to or 
greater than But less 
than
Length of Cord, 
Feet
25 50 100 150
0 218 18 18 16
8)  Do  not  operate  charger  with  damaged 
cord or plug-replace them immediately.
9)  Do not operate charger if it has received  a...

- 7 -  
• Never  use  other  than  the  dedicated  char-
ger to charge the battery pack. Otherwise, 
t h e   b a t t e r y   m a y   l e a k ,   o v e r h e a t ,   o r 
explode.
•  After  removing  the  battery  pack  from  the 
tool  or  the  charger,  always  reattach  the 
pack  cover.  Otherwise,  the  battery  con-
tacts could be shorted, leading to a risk of 
fire.
•  When  the  Battery  Pack  Has  Deteriorated, 
Replace It with a New One.
  Continued  use  of  a  damaged  battery  pack 
may...

- 8 - 
V. OPERATION WARNING!
•  Do  not  inhale  any  smoke  emitted  from  the 
tool or battery pack as it may be harmful.
[Main Body]
Switch  and  Forward/Reverse 
Lever Operation
Forward Reverse
Switch lock
CAUTION:To  prevent  damage,  do  not  operate 
Forward/Reverse  lever  until  the  bit 
comes to a complete stop.
Forward  Rotation  Switch 
Operation
1.  Push the lever for forward rotation.
2.  Depress  the  trigger  switch  slightly  to  start  the tool slowly.
3.  The  speed  increases  with...

- 9 -  
Control Panel
(1)
(2)
(4) (3)
(1) 
Impact Power Mode Select  Selecting  the  impact  power  among  3 
modes (Soft, Medium, Hard).
Press  the  impact  power  mode  button 
to  set  it.  The  mode  changes  to  hard, 
medium,  or  soft  each  time  the  button  is 
pressed. 
The driver is preset to “hard” impact mode 
setting  when  shipped  from  the  manufac-
turer.
Recommended work guideline tableImpact 
Power mode  Display Recommended Application
H
Jobs requiring a high level 
of torque where...

- 10 - 
pack cover immediately in order to prevent 
dust  or  dirt  from  contaminating  the  battery 
terminals and causing a short circuit.
 
Battery Pack LifeThe  rechargeable  batteries  have  a  lim-
ited  life.  If  the  operation  time  becomes 
extremely  short  after  recharging,  replace 
the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Li­ion Battery PackA  Li-ion  battery  that  is  recyclable  powers  the 
product you have purchased. Please call 1­800­
8­BATTERY  for...