Panasonic High Speed Scanner Kvs2065l Operating Instructions

41
Replacing Consumables
If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module and retard roller
module at the same time.
1Turn the power off and unplug the
power cord.
2Use your hand to pull towards you the
front door release.
Then open the front door completely.
3Place your finger on the paper feed
roller block shaft and pull it towards
you to remove the paper feed roller
block from the magnet. (1)
Push down the green levers and
remove the paper feed roller...

42
Replacing Consumables
4Open the optional “Roller Exchange
Kit (KV-SS009)”, and take out the
paper feed roller module.
For supplies and accessories: 
Call 1-800-346-4768 (U. S. A. only) or
your dealer.
5Install the new paper feed roller
module with the gear on the left side
and the bearings into the guide
grooves of the side chassis in the
scanner. (1)
Then push up the green levers on both
ends until they click into place. (2)
•
Match the paper feed roller module with
the bearings and guide grooves,...

43
Replacing Consumables
6Push up on the paper feed roller block
and it will magnetically attach to the
chassis.
•
When attaching the paper feed roller
block to the chassis, do not damage the
roller.
•You are now finished attaching the paper
feed roller module.
To continue, replace the retard roller
module according to the following
procedure. (The retard roller module is
located in the conveyor.)
7Pull open the conveyor towards you by
using the indent on the right side.
•
When the conveyor is pulled...

44
Replacing Consumables
9Take out the retard roller module in the
optional “Roller Exchange Kit (KV-
SS009)”.
For supplies and accessories: 
Call 1-800-346-4768 (U. S. A. only) or
your dealer.
10Pull the right side of the shaft in the
direction of the arrow and hold it there.
(1)
Attach the new retard roller module as
shown in the diagram on the right (2)
and then return the right side of the
shaft in the direction of the arrow. (3)
•
Confirm if pin A and pin B are inserted in
their notches correctly....

45
Replacing Consumables
11Hold the conveyor using both hands,
and close the conveyor by pushing it
into the unit.
•
When the conveyor is closed, the click-
stop mechanism will operate.
•If the conveyor is not closed correctly
and the operation in step 12 is done, the
conveyor may break.
12Close the front door.
•
Push both sides of the front door down
slowly until it clicks into place.
•After replacing rollers, clear the “Replace
Roll. Warning”  display.
(Refer to page 28.)
Conveyor
Before closing the...

46
Repacking Instructions
It is highly recommended that you keep the original carton and ALL packing materials. lf you need to transport or
ship your scanner, please follow these instructions.
Please Note :
•
Please use the original carton and all of the original packing materials. If you do not have the original packing
materials, these are available from your Panasonic dealer. Please refer to your service dealer, or call 1-800-833-
9626 (U. S. A. only) or your dealer.
•Improper repacking of the scanner...

 
47 
Specifications 
“Weight in pounds” of paper represents the weight of 500 [17  
a  
22 inches (432  
a  
559mm)] sheets. 
Model No.
Item 
KV-S2065L
KV-S2065W
 
Scanner  
Scanning face Duplex scanning
Scanning methodFront side : CIS (Contact Type Image Sensor)
Back side : CIS (Contact Type Image Sensor)
Readout speedSimplex scanning 
Approx. 62 sheets/min. (Letter, fed lengthwise, 200dpi)
Approx. 60 sheets/min. (A4, fed lengthwise, 200 dpi)
Duplex scanning  
Approx. 58 sheets/min. (Letter, fed...

 
48 
Specifications 
Model No.
Item 
KV-S2065L
KV-S2065W
 
Operating 
Environment  
Operating temperature 
and humidity15°C to 30°C (59°F to 86°F), 30% to 80%RH  
Storage 
Environment  
Storage temperature and 
humidity0°C to 35°C (32°F to 95°F), 10% to 80%RH  
Option  
Roller exchange kit (KV-SS009), lmprinter option (KV-SS010), 
Roller cleaning paper (KV-SS03), Ink cartridge (KV-SS06), 
White roller kit for KV-S2065W (KV-SS048), White roller kit for KV-S2065L (KV-SS071) 

 
49 
Troubleshooting 
If a problem occurs while the unit is being used, first check the following items. If the unit still malfunctions, turn it
OFF, unplug the power cord and call for service. 
Symptom
Possible CauseRemedy
 
The LCD does not display 
when the power switch is 
turned ON.The power cord is not plugged in. Insert the power plug firmly.
A fuse has blown.
Pull out the power plug, then call for 
service. Foreign matter is lodged in the fan, 
preventing it from rotating.
A double feeding...

 
50 
Troubleshooting 
LCD 
Possible CauseRemedy
 
The rollers are dirty.Clean the rollers. 
(See page 36 through 38.)
The rollers need to be 
replaced.Replace the paper feed roller 
module and retard roller module. 
(See pages 41 through 45.)
Multiple sheets were fed into 
the unit.Open the front door and remove 
the jammed paper.
(See page 35.)
The document is jammed.Open the front door and remove 
the jammed paper. 
(See page 35.)
The document is jammed.Open the front door and remove 
the jammed...