Panasonic Kx Taw848 Programing Manual

							2.9 [3] Group
PC Programming Manual 241
Feature Manual References
1.6.6 FWD (Call Forwarding)
VM DTMF Command—Recording Message
Specifies the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or 
transferred to the VPS, so that the caller can leave a message in a certain mailbox.
Default
H
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Command—Listening Message
Specifies the DTMF command the PBX sends to the VPS when an extension user answers a 
message waiting notification from the VPS, so that the extension user can retrieve a new message in 
a certain mailbox without having to dial the mailbox number manually.
Default
*H
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
VM DTMF Command—Switching to AA
Specifies the DTMF command the PBX sends to the VPS to switch from VM Service Mode to AA 
Service Mode. 
						

							2.9 [3] Group
242 PC Programming Manual
Default
#8
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Command—Switching to VM
Specifies the DTMF command the PBX sends to the VPS to switch from AA Service Mode to VM 
Service Mode.
Default
#6
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Timing—DTMF Length for VM
Specifies the length of DTMF signals the PBX sends to the VPS.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings 
						

							2.9 [3] Group
PC Programming Manual 243
Programming Manual References
None
Feature Manual References
None
Timing—Inter-digit Time
Specifies the length of pause time between DTMF signals the PBX sends to the VPS.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Timing—Waiting Time before Sending Follow on ID
Specifies the length of time that the PBX waits before sending the Follow on ID to the VPS after the 
VPS has answered a call.
Default
1.5 s
Value Range
0.5 s, 1.0 s, 1.5 s, 2.0 s
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None 
						

							2.9 [3] Group
244 PC Programming Manual
Timing—Waiting Time before Sending VM DTMF Status Signal
Specifies the length of time that the PBX waits before sending the DTMF status signal to the VPS 
after the VPS has finished dialing.
Default
1.5 s
Value Range
0.5 s, 1.0 s, 1.5 s, 2.0 s
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
Others—Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DTMF) group are busy. (Call Waiting 
tone is not sent to any VM port.)
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.9.5 ICD Group Features—Queuing
Others—FWD to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to the 
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also 
possible to send no DTMF signal to the VPS.
Default
Answer by Mailbox 
						

							2.9 [3] Group
PC Programming Manual 245
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Others—Intercept Routing to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is intercepted to the 
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also 
possible to send no DTMF signal to the VPS.
Default
None
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.9.9 Intercept Routing
Others—Mailbox for Extension
Specifies whether the mailboxes use the same numbers as the extensions and incoming call 
distribution groups, or use different numbers as programmed for each extension or incoming call 
distribution group.
Default
Extension Number
Value Range
Extension Number, Programmed Mailbox Number
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings 
						

							2.9 [3] Group
246 PC Programming Manual
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—Programmed 
Mailbox No.
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No.
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No.
Feature Manual References
None
Others—Message Waiting Lamp Control
Specifies whether the PBX or VPS cancels the Message Waiting feature (e.g., turning off the 
MESSAGE button light) when an extension user answers the message waiting notification from the 
VPS.
Default
By PBX
Value Range
By PBX, By VM
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
A VM (DTMF) group has a floating extension number, and can be assigned as the destination for 
redirected calls and incoming calls.
To assign members to the group, click Member List. To view a list of all programmed extension 
numbers and types, click Extension List View.
Floating Ext. No.
Specifies the floating extension number of the VM (DTMF) group.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9) 
						

							2.9 [3] Group
PC Programming Manual 247
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
Group Name
Specifies the name of the VM (DTMF) group, which will be shown on the display of extensions that 
call the VM (DTMF) group.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
Ty p e
Specifies the initial service mode in which the VPS answers calls.
Default
AA
Value Range
AA, VM
Maintenance Console Location
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.5 Voice Mail DTMF Integration 
						

							2.9 [3] Group
248 PC Programming Manual
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Select the group to program from the VM(DTMF) Group Number list.
To assign members to the group, enter directly or click Extension Number Setting (see 2.1.6 
Extension Number Setting). To copy members to another group, click Member List Copy, select 
the group, and click OK.
Extension Number of the SLT Port Connected to VM
Specifies the extension number assigned to the SLT port that is connected to the VPS.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Programming Manual References
2.7.4 [1-1] Slot—Extension Port—Extension Number
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.5 Voice Mail DTMF Integration
Extension Name
Indicates the name of the extension (reference only).
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Member List
Programming Manual References
2.7.4 [1-1] Slot—Extension Port—Extension Name
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.5 Voice Mail DTMF Integration 
						

							2.9 [3] Group
PC Programming Manual 249
2.9.21 [3-9] PS Ring Group
A PS ring group is a group of PS extensions that receives incoming calls. Each group has a floating 
extension number and name. One PS can belong to multiple PS ring groups. A maximum of 32 PS 
ring groups can be programmed, each containing up to 28 PS extensions.
To add PSs to the PS Ring Group, click Member List.
Floating Extension Number
Specifies the floating extension number of the PS ring group.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.21 [3-9] PS Ring Group
Programming Manual References
None
Feature Manual References
1.13.14 PS Ring Group
Group Name
Specifies the name of the PS ring group, which will be shown on the display of extensions that call 
the PS ring group when Incoming Trunk Call Information Display on this screen is set to Called 
Number.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.21 [3-9] PS Ring Group
Programming Manual References
None
Feature Manual References
1.13.14 PS Ring Group 
						

							2.9 [3] Group
250 PC Programming Manual
Incoming Trunk Call Information Display
Specifies the information of the incoming CO line call to be shown on the displays of the PSs that 
belong to the PS ring group. If the callers name or called partys name is not recognized, the 
telephone number will be shown.
Default
Caller ID
Value Range
Caller ID, Called Number
Maintenance Console Location
2.9.21 [3-9] PS Ring Group
Programming Manual References
None
Feature Manual References
1.13.14 PS Ring Group
2.9.22 [3-9] PS Ring Group—Member List
Each PS Ring Group can have up to 28 PS extensions assigned. Select the group to program from 
the PS Ring Group Number list.
To assign members to the PS Ring Group, enter directly or click Extension Number Setting (see 
2.1.6 Extension Number Setting). To copy members to another group, click Member List Copy, 
select the group, and click OK.
Extension Number
Specifies the extension number of the PS assigned to the PS Ring Group.
Default
Not stored.
Value Range
Max. 4 digits
Maintenance Console Location
2.9.22 [3-9] PS Ring Group—Member List
Programming Manual References
2.9.21 [3-9] PS Ring Group
2.7.12 [1-2] Portable Station—Extension No.
Feature Manual References
1.13.14 PS Ring Group