Panasonic Kx Taw848 Programing Manual

							2.10 [4] Extension
PC Programming Manual 361
Value Range
None, Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.5.7 Extension Port Configuration
Ty p e
Specifies the feature to be assigned to the flexible DSS button.
Default
Not Stored
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), 
Group Fwd (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out, 
Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, Time 
Service - Automatic/Manual, Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.10.14 [4-3] DSS Console—Flexible Button—Flexible button Data Copy
Feature Manual References
1.6.3 Flexible Buttons
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
362 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Default
1
Value Range
1–64
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.5 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are logged in 
to or logged out from. 
						

							2.10 [4] Extension
PC Programming Manual 363
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the paired extension belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
Value Range
All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Default
1
Value Range
1–7
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
364 PC Programming Manual
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—TRS
2.13 [7] TRS
Feature Manual References
1.4.4 Dial Tone Transfer
1.17.5 TRS (Toll Restriction)
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Ext. No. / Floating Ext. No. (for DSS)
Specifies the number of an extension to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
None 
						

							2.10 [4] Extension
PC Programming Manual 365
Ext. No. / Floating Ext. No. (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.1 ICD GROUP FEATURES
Ext. No. / Floating Ext. No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution 
group for which messages are checked. If this cell is left empty, the paired extension will check its own 
messages only.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
Ext. No. / Floating Ext. No. (for Group Fwd (Both))
Specifies the floating extension number of an incoming call distribution group for which both intercom 
and CO line calls are forwarded.
Default
Not stored. 
						

							2.10 [4] Extension
366 PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group Fwd (External))
Specifies the floating extension number of an incoming call distribution group for which CO line calls 
are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group Fwd (Internal))
Specifies the floating extension number of an incoming call distribution group for which intercom calls 
are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD 
						

							2.10 [4] Extension
PC Programming Manual 367
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Call Log)
Specifies the paired extensions number or the floating extension number of an incoming call 
distribution group for which call log information is displayed. If the cell is left empty, the paired 
extension will display its own call log information.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Ext. No. / Floating Ext. No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-out 
from.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Ext. No. / Floating Ext. No. (for Hurry-up)
Specifies the floating extension number of the incoming call distribution group whose longest waiting 
call will be redirected (Manual Queue Redirection). 
						

							2.10 [4] Extension
368 PC Programming Manual
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer
Feature Manual References
1.9.5 ICD Group Features—Queuing
Ext. No. / Floating Ext. No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the paired extensions 
mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button 
						

							2.10 [4] Extension
PC Programming Manual 369
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
1.19.5 Voice Mail DTMF Integration
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 One-touch Dialing buttons 
for extensions and DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.12.2 One-touch Dialing 
						

							2.10 [4] Extension
370 PC Programming Manual
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked in when a Call Park button with 
Parameter Selection (for Call Park) on this screen set to Specific is pressed.
Default
0
Value Range
0–99
Maintenance Console Location
2.10.13 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.5 Call Park
Ext. No. of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record conversations using One-
touch Two-way Transfer. (For example, a secretary can record a conversation into the mailbox of a 
boss.) If the cell is left empty, the extension user must specify the number of an extension each time.
Default
Not stored.