Panasonic Kx Taw848 Programing Manual

							2.10 [4] Extension
PC Programming Manual 341
FWD Mode for Call from CO
Indicates the forwarding type of incoming CO line calls (reference only).
Default
None
Value Range
None, FWD All, FWD Busy, FWD N/A, FWD Busy N/A
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
FWD Destination for Call from CO
Indicates the forwarding destination of incoming CO line calls (reference only).
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
FWD Set for Call from Extension
Indicates the current FWD status for incoming intercom calls (reference only).
Default
Off
Value Range
Off, On 
						

							2.10 [4] Extension
342 PC Programming Manual
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
DND Set for Call from Extension
Indicates the current DND status for incoming intercom calls (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.4.8 DND (Do Not Disturb)
FWD Mode for Call from Extension
Indicates the forwarding type of incoming intercom calls (reference only).
Default
None
Value Range
None, FWD All, FWD Busy, FWD N/A, FWD Busy N/A
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding) 
						

							2.10 [4] Extension
PC Programming Manual 343
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
FWD No Answer Time
Indicates the length of time that an incoming call rings at the PS before the call is forwarded (reference 
only).
Default
15 s
Value Range
0–120 s
Maintenance Console Location
2.10.8 [4-2-1] Portable Station—Extension Settings
Programming Manual References
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
2.10.9 [4-2-2] Portable Station—FWD / DND
For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be 
programmed for incoming intercom and CO line calls. Select the desired PS from the Extension 
Number / Name list.
Call from CO—Present Button Status
Specifies the status of the FWD/DND—External button. 
						

							2.10 [4] Extension
344 PC Programming Manual
Default
Current status
Value Range
OFF, FWD, DND
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.7 FWD/DND Button, Group FWD Button
Call from CO—FWD Status Availability
Enables or disables the FWD feature for incoming CO line calls.
Default
OFF
Value Range
OFF: Enables extensions to switch to FWD mode by pressing the FWD/DND button, if forward 
settings have been programmed.
ON: Prevents extensions from switching to FWD mode by pressing the FWD/DND button.
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Call from CO—DND Status Availability
Enables or disables the DND feature for incoming CO line calls.
Default
OFF
Value Range
OFF: Enables extensions to switch to DND mode by pressing the FWD/DND button.
ON: Prevents extensions from switching to DND mode by pressing the FWD/DND button. 
						

							2.10 [4] Extension
PC Programming Manual 345
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.4.8 DND (Do Not Disturb)
Call from CO—FWD Mode
Specifies the circumstances when incoming CO line calls are forwarded.
Default
None
Value Range
None, FWD All, FWD Busy, FWD N/A, FWD Busy N/A
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding) 
						

							2.10 [4] Extension
346 PC Programming Manual
Call from Extension—Present Button Status
Specifies the status of the FWD/DND—Internal button.
Default
Current status
Value Range
OFF, FWD, DND
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.7 FWD/DND Button, Group FWD Button
Call from Extension—FWD Status Availability
Enables or disables the FWD feature for incoming intercom calls.
Default
OFF
Value Range
OFF: Enables extensions to switch to FWD mode by pressing the FWD/DND button, if forward 
settings have been programmed.
ON: Prevents extensions from switching to FWD mode by pressing the FWD/DND button.
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Call from Extension—DND Status Availability
Enables or disables the DND feature for incoming intercom calls.
Default
OFF 
						

							2.10 [4] Extension
PC Programming Manual 347
Value Range
OFF: Enables extensions to switch to DND mode by pressing the FWD/DND button.
ON: Prevents extensions from switching to DND mode by pressing the FWD/DND button.
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.4.8 DND (Do Not Disturb)
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Default
None
Value Range
None, FWD All, FWD Busy, FWD N/A, FWD Busy N/A
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None 
						

							2.10 [4] Extension
348 PC Programming Manual
Feature Manual References
1.6.6 FWD (Call Forwarding)
FWD No Answer Timer
Specifies the length of time that an incoming call rings at the PS before the call is forwarded.
Default
15 s
Value Range
0–120 s
Maintenance Console Location
2.10.9 [4-2-2] Portable Station—FWD / DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
2.10.10 [4-2-3] Portable Station—Flexible Button
Each flexible CO button can be customized to allow one-touch access to a certain feature. A 
maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from the 
Extension Number / Name list.
To copy values from one location to another, click the Copy to button.
For more information on flexible buttons, see 1.6.3 Flexible Buttons in the Feature Manual.
Ty p e
Specifies the feature to be assigned to the flexible button.
Default
Key Location 1–8: Single CO
Ley Location 9–12: Not Stored
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), 
Group Fwd (Internal), Account, Conference, Terminate, EFA, Call Park, Log-in/Log-out, Hurry-up, 
Wrap-up, Time Service, TRS Level Change, Time Service - Automatic/Manual, Two-way Record, 
Two-way Transfer, LCS, Voice Mail Transfer
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button 
						

							2.10 [4] Extension
PC Programming Manual 349
Programming Manual References
2.10.11 [4-2-3] Portable Station—Flexible Button—Flexible Button Data Copy
Feature Manual References
1.6.3 Flexible Buttons
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Default
1
Value Range
1–64
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking zone. 
						

							2.10 [4] Extension
350 PC Programming Manual
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.5 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged in to or logged out 
from.
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the PS belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
Value Range
All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night