Panasonic Kx Tge463 Operating Instructions Manual

Setting up
Connections
RIf you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
n  Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a...

Battery charging
Charge for about 7 hours.
RConfirm  “Charging ” is displayed (
).
R When the batteries are fully charged,
“Fully charged ” is displayed.
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Controls
Handset
Ringer indicator
Message indicator
Belt clip holesSpeakerMjN/MkN  (VOL.: Volume up/down)MN (TALK)Dial keypad ( *: TONE)Headset jackMZ N (SP-PHONE: Speakerphone)M FLASH N M CALL WAIT NMicrophoneReceiver
DisplayMOFF N ()MCALL BLOCK N ()Charge contacts
n Control type
 Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
M CELL N is displayed.
 Navigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through...

MN (PLAY/STOP)
Message indicator
M LOCATES CELL NMHANDSET LOCATOR NMjN/MkN  (VOL.: Volume up/down)MERASE NMCELL 1 N (For pairing)
MN  (Skip)MCELL 2 N (For pairing)
MN  (Repeat)
n  KX-TGE470 series: page 4
Charge contactsSpeakerMHOLD N M CONF NMREDIAL N M PAUSE NMFLASH N M CALL WAIT NMZ N (SP-PHONE: Speakerphone)
SP-PHONE indicator
HEADSET indicatorCELL 1 indicator
CELL 2 indicator
Message counterMN  (PLAY/STOP)
Message indicator
M ANSWER ON/OFF NMLOCATES CELL NMLOCATOR N M INTERCOM NMjN/MkN  (VOL.:...

ItemMeaning
Ringer volume is off.*3
(page 22, 40, 42)
Silent mode is on. (page 47)
Call sharing mode is off.
(page 44)
Alarm is on. (page 46)
Handset number
Battery level
Blocked call (page 32)
Clarity booster is on. *2
(page 23)
Baby monitor is activated.
The name/number displayed
next to the icon indicates the
monitoring unit. (page 47)
In useAnswering system is being
used by another handset or
the base unit.
Cell1 in
useSomeone is using the
corresponding line.
Cell2 in
use
C1&C2 in
use
Line in
use
*1...

StatusMeaning
Light off– A Bluetooth headset is notpaired to the base unit.
– The Bluetooth headset is not connected to the base
unit.
Language settings
Display language
1 MMENU N#110
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
Voice announcement language
You can select the language used for the
following features.
– Answering system guidance
– Talking Caller ID
– Application (App) alert announcement
– Text message (SMS) alert announcement
1 MMENU N#112
2 Mb N: Select the desired setting....

Link to cell featureYou can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular phone is in your pocket or bag.
– enjoy cordless cellular calls even if your cellular...

2Mb N:  “Yes ” a  M SELECT N
R When the cellular phone is unpaired,
the CELL indicator is turned off.
3 MOFF N
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When  “All ” is
selected, all handsets and the base unit ring.
1 For CELL 1:  MMENU N#6271
For CELL 2:  MMENU N#6272
2 Mb N: Select the desired handset or  “All ”.
a  M SAVE N a  M OFF N
Note:
R When you select a specific handset to
receive calls for a...

unit range. You can set the interval. The
default setting is “1 min ”.
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone...

When you use the landline again
Before connecting the telephone line to the
base unit, select “Off ” in step 2, “Cellular line
only mode (If you do not use the landline)”,
page 19.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press  MCELL N on the handset.
– you press  M
N or  MZ N on the handset
while the cellular line only mode is turned
on.
– you press  MZ N on the base unit while the
cellular line only mode is turned on....