Panasonic Kx Tge463 Operating Instructions Manual

Sub-menu 1Sub-menu 2SettingsCode
SettingsAuto connect*1Off
<
1 min >
3 min
5 min
10 min#63218
Cell area code *1–#63320
Cell line only
mode*1On
<
Off >#15719
Cell line select
–Handset
Cellphone 1 *5
Cellphone 2 *5#63420
Cell line select
–
Base unit *1
, *3<
Cellphone 1 >*5
Cellphone 2 *5#
G 634
Set PIN *1<
0000 >#61920
International
code *1–#11753
Country code *1–#118
Trunk prefix*1–#119
Main menu:  “
Set date & time ”
Sub-menu 1Sub-menu 2SettingsCode
Date and time*1––#10116
Memo alarmAlarm1–3<
Off >...

Main menu:  “Settings ”
Sub-menu 1Sub-menu 2SettingsCode
Ring adjustmentsRinger volume
– Handset *4Off
–6 #160–
Ringer volume
– Base unit *1,
 *4Off
–6 #G 160–
Ringer tone *4, *8, *11
(Handset)< Tone 1 >#161–
Interrupt tone
–Handset *12<
On >
Off#20125
Interrupt tone
– Base unit *1, *3,
 *12<
On >
Off# G 20129
Silent mode
– HandsetOn/Off
–On
– < Off>#23847
Start/End
– < 11:00 PM/
06:00 AM >#23747
Select group
Home
Cell 1
Cell 2
Group 4-9#24147
Silent mode
–Base unit *1, *3On/Off
–
On
– < Off>#G 23847...

Sub-menu 1Sub-menu 2SettingsCode
Talking caller IDHandset
Off#16251
Base unit *1On
<
Off >#G 162
Key detector
setting *13
– 1:Add new device
(for  Detector1 )*14
– 2:Add new device
(for  Detector2 )
– 3:Add new device
(for  Detector3 )
– 4:Add new device
(for  Detector4 )Change name *1Detector1#6561–
Detector2*15#6562*15
Detector3 *15#6563*15
Detector4 *15#6564*15
Registration–#6571–
#6572*15
#6573*15
#6574*15
Deregistration–#6581–
#6582*15
#6583*15
#6584*15
Call block *1Block a single
number–#21732...

Sub-menu 1Sub-menu 2SettingsCode
Auto intercomHandsetOn
#27331
Base unit *1,
 *3On
<
Off >#G 273
Key tone–
Off#165–
Caller ID edit
(Caller ID number auto edit)–< On >
Off#21452
Auto talk *16–On
<
Off >#20022
Set tel line *4Set dial mode *1<
Tone >
Pulse#12016
Set flash time *1, *1780 ms
90 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
<
700 ms >
900 ms#12123
Set line mode *1, *18A
 < B>#122–
Call sharing *1–<
On >
Off#19424, 29
RegistrationRegister handset–#13049
Deregistration *2–#13150...

Main menu:  “Baby monitor ”
Sub-menu 1Sub-menu 2SettingsCode
On/Off–On
#26847
Sensitivity level–Low

High#26948
Main menu:  “Key detector ”*13
Sub-menu 1Sub-menu 2SettingsCode
Search––#655–
Battery check––
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 KX-TGE470 series: page 4
*4 When the cellular line only mode is...

*18 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Set
the line mode to  “A ” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3...

RIf you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 For handset setting:  M MENU N#238
For base unit setting (using a
handset) *1
: M MENU N#*238
2 Mb N: Select the desired setting.  a
M SAVE N
R If you select  “Off ”, press  MOFF N to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select  “AM ” or  “PM ”.  a  M OK N
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select  “AM ” or  “PM ”.
7...

3Mb N: Select the desired unit’s number to
monitor with.  a M SAVE N
R “Baby monitor ” will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset or
the base unit can hear the monitored
handset by making an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
This...

3Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
Answering the baby monitor
nWhen monitoring with a unit:
Handset:  Press M
N to answer a call.
Base unit:  Press MZ N to answer a call. *1
*1 KX-TGE470 series: page 4
If you want to respond from the monitoring
unit, press  MMUTE N.
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to  “On ” (page 31).
Note:
R If you receive an outside call when
communicating with the monitored
handset, the interrupt tone...

Deregistering a handsetA handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1 MMENU N#131
R All handsets registered to the base unit
are displayed.
2 Mb N: Select the handset you want to
cancel.  a M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
50For assistance, please visit http://shop.panasonic.com/support
Programming

TGE46x47x(en)_1117_ver061.pdf   502015/11/17...