Panasonic Kx Tge463 Operating Instructions Manual

Your voice will be heard using the
speakers of the base unit*1
 and all
handsets, until a paged party answers
your page or until you press  MOFF N.
After the other party answers, the
speakerphone mode is turned on.
3 When you finish talking, press  MOFF N.
*1 KX-TGE470 series: page 4
Note:
R You can also use the  MINTERCOM N soft
key, if displayed, to make intercom calls.
R You cannot use voice paging if other units
are in use.
R Voice paging is not available when a range
extender (KX-TGA405) is...

Call blockYou can press the  MCALL BLOCK N button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1 Press  MCALL BLOCK N under the
situations shown above.
2 Confirm the call block...

“Call block ” a  M SELECT N a
Go to step 4.
3 MCALL BLOCK N
4 Mb N:  “Yes ” a  M SELECT N
5 Edit the phone number if necessary
(24 digits max.).  a M SAVE N a  M OFF N
Adding call blocked numbers
manually
1 MCALL BLOCK N
2 Mb N:  “Block a single number ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4 Enter the phone number (24 digits max.).
a M SAVE N a  M OFF N
Storing a range of number
1 MCALL BLOCK N
2 Mb N:  “Block range of numbers ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4...

PhonebookYou can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 35). The
following groups are available:
– Group 1:  “Home ”*1
 (default)
– Group 2:  “Cell 1 ”*1
– Group 3:  “Cell 2 ”*1
– Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a...

3MSAVE N
4 Mb N:  “Phonebook ” a  M SELECT N
5 Continue from step 3, “Editing entries”,
page 36.
n When a cellular phone is not paired:
1 MC N CID
2 Mb N: Select the desired entry.  a
M MENU N
R To edit the number:
Mb N:  “Edit ” a  M SELECT N
Press  MEDIT N repeatedly until the
phone number is shown in the
desired format.  a M SAVE N a  M b N:
“ Phonebook ” a  M SELECT N a
Go to step 4.
3 Mb N:  “Save phonebook ” a
M SELECT N
4 Continue from step 3, “Editing entries”,
page 36.
Groups
Groups can help...

Editing entries
1Find the desired entry (page 35).
2 MMENU N a  M b N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N
5 Mb N: Select the desired group (page 35).
a  M SELECT N 2 times  a M OFF N
Erasing entries
Erasing an entry
1 Find the desired entry (page 35).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Erasing all entries
1 MF N W  a  M MENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N: Select...

Erasing an entry
1Press and hold the desired speed dial key
(1  to  9). a  M MENU N
2 Mb N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Viewing an entry/Making a call
nUsing a cellular line:
1 Press and hold the desired speed dial
key ( 1 to  9).
2 MCELL N
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 20).
3 Mb N: Select the desired cellular phone.
a  M SELECT N
n Using a...

Menu list
To access the features, there are 2 methods.
nScrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R To exit the operation, press...

Sub-menu 1Sub-menu 2SettingsCode
New message
alert*1Outgoing call
–
On/OffOn
#33860
Outgoing call
–Notification to–
Outgoing call
–Remote codeActivate

Base unit beepOn
#33960
SettingsRing count *1Toll saver
2-7 rings
<
4 rings >#21163
Recording time *1<
3 min >
1 min
Greeting only *2#30563
Remote code*1<
111 >#30662
Screen call
–Handset
Off#31063
Screen call
– Base unit *1,
 *3<
On >
Off# G 310
Answer on *1––#32758
Answer off *1––#32858
Main menu:  “
Voicemail access ”*4
OperationCode
Listening to...

Main menu:  “Bluetooth ”
Sub-menu 1Sub-menu 2SettingsCode
Link to cell
–1:Add new
device *5
(for CELL 1)
– 2:Add new
device *5
(for CELL 2)Connect *1
/
Disconnect *1–#6251*619
#6252*7
Ringer volume
–
HandsetOff –6 #6281 *622
#6282*7
Ringer volume
–
Base unit *1Off
–6 #G 6281 *628
#
G 6282 *7
Ringer tone *8<
Tone 2 >*6
< Tone 4 >*7#6291 *6–
#6292*7
Select unit to
ring*1<
All >
Handset 1-6#6271 *618
#6272*7
Ring as cell
(limited) *1<
On (with
Talking CID) >
On (without
Talking CID)
Off#6141 *618
#6142*7...