Panasonic Projector Pt Ez570u Operating Instructions

							Setting
ENGLISH - 71
Settings
Filter counter
This function is used to set a frequency for the filter 
replacement.
Press ▲▼ to select [Filter counter].1 ) 
Press ► or the  button to 2 ) 
access the submenu items.
Filter counter J
Show the total accumulated time of the filter use timer 
setting.
Filter counter remaining J
The remaining time for the filter counter is displayed 
in units of 10%.
 
This is displayed in red when the remaining time is 10%. z
Filter counter timer J
To set a timer. When the projector reaches the 
selected time the filter warning icon appears on the 
screen.
Press ▲▼ to select [Filter counter 1 ) 
timer] and then press the  
button.
Press ▲▼ to set the timer. 2 ) 
Select from [Off/1000H/2000H/3000H/  z
4 000H/6000H/8000H/9000H/12000H] 
depending on the use environment.
The situation which different icons appear as  z
below shown:
When the remaining time is less 
than 10%.
When the remaining time is 0, the 
filter replacement is necessary.
When the projector reaches 
a time set by user in the timer 
setting.
Filter counter reset J
After replacing the filter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 ) 
reset].
Press the  button. 2 ) 
[Filter counter Reset?] appears. Select [Yes]  z
to continue. Another confirmation dialog 
box appears, select [Yes] to reset the [Filter 
counter].
Test pattern
Results of adjustment of the position , size and other 
factors are not reflected in test patterns. Ensure the 
input signal is displayed before performing various 
kinds of setting.
Press ▲▼ to select [Test pattern].1 ) 
Press ► or the  button to 2 ) 
access the submenu items.
Press ▲▼ to go backwards and 3 ) 
forwards between test patterns as 
below.
[Color], [Gradation 1], [Gradation 2],   z
[Gradation 3], [Gradation 4], [All white], [All 
black] and [Cross].
Note
Even while the test pattern is displayed, the zoom,  z
focus, lens shift, shutter, and power off functions 
take priority.
Factory default
This function returns all setting values except for [PIN 
code lock], [Logo PIN code lock] and [Filter counter] 
to the factory default settings.
Press ▲▼ to select [Factory default].1 ) 
Press the  button.2 ) 
[Return to Factory default?] appears. Select  z
[Yes] to continue. Another confirmation dialog 
box appears, select [Yes] to return to [Factory 
default]. 
						

							72 - ENGLISH
Settings
Information
Select [Information] from the Main Menu (see 
“Navigating through the menu” on page 47), 
then select the item from the sub-menu.
Remote ControlSide Control
Input Source Information 
Display 
The Information Menu is used for checking the status 
of the image signal being projected and the operation 
of the projector.
You can also press the  button on the remote 
control to display the Information menu.
Input J
The selected input source is displayed.
System J
The selected system is displayed.
H-sync freq. J
The selected H-sync freq. is displayed.
The horizontal frequency of the input signal is 
displayed in KHz, or - - - KHz when no signal.
V-sync freq. J
The selected V-sync freq. is displayed.
The vertical frequency of the input signal is displayed 
in Hz, or - - - Hz when no signal. Numbers of Hz 
doubles when during Interlace.
Screen J
The selected Screen size is displayed.
Language J
The selected language is displayed.
Lamp power J
The selected lamp mode is displayed.
Lamp runtime J
The cumulative lamp operating time is displayed.
Filter counter J
The filter using time filter is displayed.
Power management J
[Off] , [Ready] or [Shut down], and [Timer] are 
displayed.
Key lock J
The selected Key lock icon is displayed.
PIN code lock J
[Off], [On 1] or [On 2] is displayed.
Shutter management J*
To display the setting of [Protection] and time.
* (Only for EZ570 series, EW630 series and EX600 
series.)
Simple mode J
To display the configuration of a simple remote control 
mode.
Remote control J
The selected remote control code is displayed.
Serial number J
The serial number of the projector is displayed.
The serial number is used to service the projector. 
						

							ENGLISH - 73
Settings
Network
Select [Network] from the Main Menu (see 
“Navigating through the menu” on page 47), 
then select the item from the sub-menu.
Remote ControlSide Control
Projector name
You can change the projector name to be displayed 
on the network.
Press ▲▼ to select [Projector name].1 ) 
Press the  button.2 ) 
Press ▲▼◄► buttons to set the 3 ) 
[Projector name].
Network setup
You can make detailed wired LAN settings.
Press ▲▼ to select [Network setup], 1 ) 
and press  button.
Press ▲▼ to select an item, and 2 ) 
change the setting according to the 
instructions.
DHCP 
(DHCP client function)
On:  If a DHCP server exists in the 
network to which the projector 
is connected, the IP address 
will automatically be acquired.
Off:   If a DHCP server does not 
exist in the network to which 
the projector is connected, 
additionally set [IP address, 
[Subnet mask] and [ Default 
gateway].
IP address (Display of IP address 
and setting)
Enter the IP address if DHCP 
server is not used.
Subnet mask
(Displaying and 
setting the subnet 
mask)
If not using a DHCP server, 
enter the subnet mask
Default gateway 
(Display of gateway 
address and setting)
Enter the gateway address if DHCP 
server is not used.
DNS1
(Display of Preferred 
DNS ser ver address 
and setting)
Enter the DNS server address if 
DHCP server is not used.
DNS2
(Display of Alternate 
DNS ser ver address 
and setting)
Enter the alternate DNS server 
address if DHCP server is not used.
Press ▲▼◄► to select [Set], and press 3 ) 
 button.
Default wired LAN settings z
            
The following settings are set before the 
projector leaves the factory.
DHCPOff
IP address1 9 2 .1 6 8 .1 0 .1 0 0
Subnet mask255.255.255.0
Default gateway1 9 2 .1 6 8 .1 0 .1
DNS 1/DNS 2NONE
Note
Before using the DHCP server, make sure the DHCP  z
server is already functioning.
For details of IP address, subnet mask, gateway and  z
DNS, ask the network administrator.
Network control
Set when you want to control the projector from a 
computer connected to the network.
Press ▲▼ to select [Network control].1 ) 
Press ► or the  button to 2 ) 
access the submenu items.
Press ▲▼ to select one item and press 3 ) 
◄► to switch the function between 
[On] and [Off].
WEB controlSet to [On] to control with the Web 
browser.
PJLink controlSet to [On] to control with the 
PJLink protocol.
Command 
control
Set to [On] to control with the 
SERIAL IN terminal control 
command format.
AMX D. D.Set to [On] to control with the  
AMX Device Discovery.
RoomViewSet to [On] to control with the 
Crestron RoomView®. 
						

							Network
74 - ENGLISH
Settings
"Crestron RoomView" is a system developed by 
Crestron Electronics, Inc. which collectively manage 
and control multiple system devices connected via 
the network, from a computer. This projector supports 
"Crestron RoomView".
 
For details of "Crestron RoomView", refer to the  z
Crestron Electronics, Inc. website. (Provided only in 
English.).
    URL http://www.crestron.com/.
     For the download of "Crestron RoomView Express", 
refer to the Crestron Electronics, Inc. website. 
(Provided only in English.).
    URL http://www.crestron.com/getroomview.
Note
For more details about the AMX Device Discovery, please  z
visit http://www.amx.com/.
Network status
This function shows the LAN setting environment of 
the currently selected projector.
Press ▲▼ to select [Network status].1 ) 
Press ► or the  button to 2 ) 
show the information of the current 
projector status.
Network factory default
You can reset the network setting to the factory 
default of the projector.
Press ▲▼ to select [Network factory 1 ) 
default].
Press the  button.2 ) 
[Return to Network factory default?] appears.  z
Select [Yes] to continue. Another confirmation 
dialog box appears, select [Yes] to return to 
[Factory default]. 
						

							Network
ENGLISH - 75
Settings
Network connections
The projector has a network fuction, and the following operations are av\
ailable from the computer using the web 
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
Note
A LAN cable is required to use the network function. z
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
A Web browser is required to use this function . Confirm that the Web browser can be used beforehand.  z
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7  
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be  z
used beforehand.
Use shielded LAN cable (STP cable) that is compatible with category 5 or above. z
Use a LAN cable with length of 100m or shorter. z
Name and function of network function parts J
(1)   LAN LINK/ACT lamp (yellow) 
      Lights on when connected. 
Flashes when transmitting/receiving data.
(2)  LAN terminal (10BASE-T/100BASE-TX)
     Used to connect the LAN cable here.
(3) LAN 10/100 lamp (green)
     Lights on when connected to the 100BASE-TX.
Attention
Connect the LAN to the indoor equipment. z
(1)(2)(3) 
						

							Network
76 - ENGLISH
Settings
Accessing from the Web browser
Activate the Web browser in the personal computer.1 ) 
Enter the IP address set by the projector into the URL input field of the Web browser.2 ) 
Enter your “ User name” and “ Password”.3 ) 
  zThe factory default settings are user1 (user privileges)  
or admin1 (administrator privileges) for the use name  
and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector  4 ) 
status page.
  z“Projector status” page is displayed.
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions. z
Change the password first of all. z
Administrator privileges enable the use of all functions. User privileges enable the use of only “Projector  z
status”, “Network status”, “Basic control” and “Change password”.
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On]. z
There are some control items used with the JavaScript function in the setting pages. If the web browser is set  z
not to use this JavaScript function, it may not control the projector properly.  
						

							Network
ENGLISH - 77
Settings
Description of each item  J
1 Page selection tabs
  Click these to switch pages.
2 Monitor information button 
Click this item, and the status of the projector 
is displayed.
3 Projector control button 
Click this item to display the projector control 
page.
4 Detailed set up button 
Click this item to display the advanced 
settings page.
5 Change password button
    Click this button to display the password 
change page.
6 Crestron RoomView button
    Click this button to monitor and control the 
projector through the network.
7  Language switch button
    Click this button to switch language between 
English and Japanese.
Projector status page J
Click [Status], then [Projector status] to display the Status information page.
This page displays the projector statuses established for the items shown below.
1 Displays the type of projector.
2 Displays the firmware version of the projector 
main unit.
3 Displays the power source status.
4 Displays the video mode status.
5 Displays the serial number of the projector.
6 Displays the firmware version of the network.
7 Displays the AV mute status.
8 Displays the volume status.
9 Displays the status of input switch.
10  Displays the intake temperature status of the  
     projector.
11  Displays the the around lamp temperature 
status of the projector. 
12     Displays the optics module temperature 
status of the projector.
13 Displays the use time of the lamp.
14  Displays the self diagnostics information. 
     (Æpage 78)
15 Displays the runtime of the projector.
1
2
3
4
5
6
1
2
3
4
56
7
8
9
10
1112
14
13
7
15 
						

							Network
78 - ENGLISH
Settings
Error information page  J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, 
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.• 
                  When [FAILED] has appeared for an item
ParameterDescription
MAIN CPU BUSTrouble has occurred in the microcomputer circuitry. Consult your dealer.
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPER ATURE
Intake air temperature is high. It could be because it is used in an environment of high 
temperature such as close to a heating device, etc., the air intake is blocked, or the air 
filter is clogged.
AROUND LAMP TEMPER ATUREThe temperature around the lamp is too high. Exhaust may be blocked, or [Fan control] 
mode may be set wrong. See [Fan control] of the Functional Manual. (Æpage 66)
OPTICS MODULE TEMPER ATUREOptics module temperature is high. The exhaust air port maybe blocked or the air filter 
is clogged.
LAMP REMAIN TIMEThe lamp runtime has exceeded the prescribed cumulative time, and it is now time to 
replace the lamp.
LAMP STATUSThe lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
APERTURE(CONTR AST-SHUTTER)Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
SHUTTERThere is a problem with shutter.
AIR FILTERThere is a problem with the air filter unit.
FILTER UNITThe air filter unit is not installed.
Network status page J

Displays the current configuration information of the network.
Displays the configuration details of wired LAN.
OK:      Normal operation
FAILED :     Occurrence of trouble
WARNING: Warning
 
						

							Network
ENGLISH - 79
Settings
Basic control page  J
To move from another page, click [Projector control], then [Basic control].
1 Power standby/on control
2 Use these to select the input signals
3 Switches image mode
4 Turn on or off the Shutter function
Detail control page J
Click [Projector control], then [Advanced control] to display the Detail control page.
1  Execute Auto PC ADJ. function
2 Operations on Image adjust
3  Operations on Screen mode
4  Operations on Rear/Ceiling
1
4
3
2
1
2
3
4 
						

							Network
80 - ENGLISH
Settings
  5 Operations on Keystone function 
  6 Operations on Lens shift
  7 Operations on Zoom
  8 Operations on Focus   
  9 Operations on Test pattern 
10 Return to factory default setting
5
6
7
8
9
10