Home > Panasonic > Projector > Panasonic Projector PT-RZ970 User Manual

Panasonic Projector PT-RZ970 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Projector PT-RZ970 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Thank you for purchasing this Panasonic product.
     ■The Operating Instructions correspond to the firmware’
    
    s main version 2.00 and higher.
     ■This manual is common to all the models regardless of suffixes of the Model No.
     zfor Taiwan
    BT: Black model, the standard zoom lens supplied
     z for India
    BD: Black model, the standard zoom lens supplied   L
    BD: Black model, the lens sold separately
    WD: White model, the standard zoom lens supplied   LWD: White model, the lens sold separately
     zfor 
    
    Asia (except for Taiwan, India, Korea) / Oceania / Africa
    BA /B: Black model, the standard zoom lens supplied   L BA /LB: Black model, the lens sold separately
    WA /W: White model, the standard zoom lens supplied   LWA /LW: White model, the lens sold separately
     zfor other countries or regions
    B
    
    : Black model, the standard zoom lens supplied    
    L
     B: Black model, the lens sold separately
    W: White model, the standard zoom lens supplied  
     
    L
     W: White model, the lens sold separately
     ■Before operating this product, please read the instructions carefully and save this manual 
    for future use.
     ■Before using this product, be sure to read “Read this first!” (
    x 
    
    pages   5   to   13).
    DPQP1026ZB
    DLP™ Projector  Commercial Use
    Operating Instructions
    Functional Manual
    ENGLISH
    Model No. PT-RZ970
    	 PT-RW930
    	 PT-RX110 
    						
    							2 - ENGLISH
    Contents
    Contents
    Read this first!    5
    Chapter 1
     
    Preparation
    Precautions for use      17
    Cautions when transporting
        
     17
    Cautions when installing
        
     17
    Security
        
     2 0
    DIGIT
    AL LINK
        
     2 0
    Art-Net
        
     2 1
    Early W
    arning Software
        
     2 1
    Disposal
        
     2 1
    Cautions on use
        
     2 1
    Accessories
        
     2 3
    Optional accessories
        
     2 4
    About your projector
        
     25
    Remote control
        
     2 5
    Projector body
        
     2 7
    Preparing the remote control
        
     30
    Inserting and removing the batteries
        
     3 0
    When using the multiple projectors
        
     3 0
    Connecting the remote control to the projector  with a cable
        
     3 0
    Chapter 2 Getting Started
    Setting up    32
    Installation mode
        
     3 2
    Parts for installation (optional)
        
     33
    Projected image and throw distance
        
     33
    Adjusting adjustable feet
        
     4 7
    Removing/attaching the projection lens
        
     48
    Removing the projection lens
        
     4 8
    Attaching the projection lens
        
     4 9
    Connecting
        
     50
    Before connecting
        
     5 0
    Connecting example: 
    AV equipment
        
     51
    Connecting example: Computers
        
     5 2
    Connecting example using DIGIT
    AL LINK
        
     53
    Connecting example when using the  contrast synchronization function/shutter 
    synchronization function
        
     5 4
    Chapter 3 Basic Operations
    Switching on/off the projector    57
    Connecting the power cord
     
       57
    Power indicator
     
       57
    Switching on the projector
     
       5 8
    When the initial setting screen is displayed
        
     5 9
    Making adjustments and selections
        
     6 6
    Switching of
    f the projector
     
       6 7
    Projecting
     
       68
    Selecting the input signal
     
       6 8
    Adjusting the focus, zoom, and shift
        
     6 9
    Adjusting the lens position and focus when the  Fixed-focus Lens (Model No.: ET
    -
    
    DLE030) is 
    used
     
       6 9
    Setting the lens position
     
       7 0
    Adjustment range by the lens position shift  (optical shift)
     
       71
    Operating with the remote control
        
     72
    Using the shutter function
     
       7 2
    Using the on-screen display function
        
     7 2
    Using the automatic setup function
        
     73
    Using the function button
     
       73
    Displaying internal test pattern
     
       73
    Using the status function
     
       7 4
    Setting ID number of the remote control
        
     7 4
    Chapter 4 Settings
    Menu navigation    76
    Navigating through the menu
     
       7 6
    Main menu
     
       77
    Sub-menu
     
       7 8
    [PICTURE] menu
     
       81
    [PICTURE MODE]
     
       8 1
    [CONTRAST]
     
       8 1
    [BRIGHTNESS]
     
       8 1
    [COLOR]
     
       8 2
    [TINT]
     
       8 2
    [COLOR 
    TEMPERATURE]
     
       8 2
    [WHITE GAIN]
     
       8 4
    [GAMMA]
     
       8 4
    [SYSTEM DA
    YLIGHT VIEW]
     
       8 5
    [SHARPNESS]
     
       8 5
    [NOISE REDUCTION]
     
       8 6
    [DYNAMIC CONTRAST]
     
       8 6
    [SYSTEM SELECT
    OR]
     
       8 7
    sRGB-compliant video
     
       8 8  
    						
    							ENGLISH - 3
    Contents
    [POSITION] menu
        
     89
    [SHIFT]
        
     8 9
    [ASPECT]
        
     8 9
    [ZOOM]
        
     9 0
    [CLOCK PHASE]
        
     9 1
    [GEOMETR
    Y]
        
     9 1
    [ADV
    ANCED MENU] menu
        
     94
    [DIGIT
    AL CINEMA REALITY]
        
     9 4
    [BLANKING]
        
     9 4
    [INPUT
     RESOLUTION]
        
     9 5
    [CLAMP
     POSITION]
        
     9 5
    [EDGE BLENDING]
        
     9 5
    [FRAME RESPONSE]
        
     9 7
    [RASTER POSITION]
        
     9 8
    [DISPLA
    Y LANGUAGE] menu
        
     99
    Changing the display language
        
     9 9
    [DISPLA
    Y OPTION] menu
        
     100
    [COLOR MA
    TCHING]
        
     100
    [COLOR CORRECTION]
        
     101
    [SCREEN SETTING]
        
     101
    [AUT
    O SIGNAL]
        
     102
    [AUT
    O SETUP]
        
     102
    [BACKUP
     INPUT SETTING]
        
     103
    [RGB IN]
        
     104
    [DVI-D IN]
        
     105
    [HDMI IN]
        
     107
    [DIGIT
    AL LINK IN]
        
     108
    [SDI IN]
        
     109
    [ON-SCREEN DISPLA
    Y]
        
     11 0
    [CLOSED CAPTION SETTING] (only when  NTSC or 480/60i 
    YC
    BCR signal is input)     11 2
    [IMAGE ROT
    ATION]
        
     11 3
    [BACK COLOR]
        
     11 3
    [ST
    ARTUP LOGO]
        
     11 3
    [UNIFORMITY]
        
     11 4
    [SHUTTER SETTING]
        
     11 5
    [FREEZE]
        
     11 6
    [W
    AVEFORM MONITOR]
        
     11 6
    [CUT
     OFF]
        
     11 8 [PROJECT OR SETUP] menu  
       11 9
    [PROJECT
    OR ID]
     
       11 9
    [PROJECTION METHOD]
     
       11 9
    [OPERA
    TION SETTING]
     
       120
    [LIGHT
     OUTPUT]
     
       124
    [BRIGHTNESS CONTROL]
     
       125
    [ST
    ANDBY MODE]
     
       129
    [QUICK ST
    ARTUP]
     
       129
    [NO SIGNAL
     SHUT-OFF]
     
       130
    [NO SIGNAL
     LIGHTS-OUT]
     
       130
    [INITIAL
     STARTUP]
     
       130
    [ST
    ARTUP INPUT SELECT]
        
     130
    [DA
    TE AND TIME]
     
       131
    [SCHEDULE]
     
       132
    [MUL
    TI PROJECTOR SYNC]
        
     134
    [RS-232C]
     
       135
    [REMOTE2 MODE]
     
       137
    [FUNCTION BUTT
    ON]
     
       137
    [LENS CALIBRA
    TION]
     
       138
    [ST
    ATUS]
     
       138
    [SA
    VE ALL USER DATA]
     
       139
    [LOAD 
    ALL USER DATA]
     
       139
    [INITIALIZE]
     
       140
    [SER
    VICE PASSWORD]
     
       140
    [P
     IN P] menu
     
       141
    Using the P
     IN P function
     
       141
    [TEST P
    ATTERN] menu
     
       143
    [TEST
     PATTERN]
     
       143
    [SIGNAL
     LIST] menu
     
       144
    Registering new signals
     
       144
    Renaming the registered signal
        
     144
    Deleting the registered signal
        
     144
    Protecting the registered signal
        
     145
    Expanding signal lock-in range
        
     145
    Sub memory
     
       146
    [SECURITY] menu
     
       147
    [SECURITY
     PASSWORD]
     
       147
    [SECURITY
     PASSWORD CHANGE]
        
     147
    [DISPLA
    Y SETTING]
     
       147
    [TEXT
     CHANGE]
     
       148
    [CONTROL
     DEVICE SETUP]
        
     148
    [CONTROL
     DEVICE PASSWORD CHANGE]
     
       149  
    						
    							4 - ENGLISH
    Contents
    [NETWORK] menu     151
    [DIGIT
    AL LINK MODE]
        
     151
    [DIGIT
    AL LINK STATUS]
        
     151
    [NETWORK SETUP]
        
     152
    [NETWORK CONTROL]
        
     152
    [NETWORK ST
    ATUS]
        
     153
    [DIGIT
    AL LINK MENU]
        
     153
    [Art-Net SETUP]
        
     153
    [Art-Net CHANNEL
     SETTING]
        
     154
    [Art-Net ST
    ATUS]
        
     154
    Chapter 5 Operations
    Network connection     156
    Connecting to the network
        
     156
    W
    eb control function
        
     159
    Computer that can be used for setting
        
     159
    Accessing from the web browser
        
     159
    Chapter 6 Maintenance
    Light source/temperature indicators     177
    When an indicator lights up
        
     177
    Maintenance
        
     179
    Before maintaining the projector
        
     179
    Maintenance
        
     179
    T
    roubleshooting
        
     180
    [SELF TEST] indications
        
     182
    Chapter 7 Appendix
    Technical information     185
    PJLink protocol
        
     185
    Using 
    Art-Net function
        
     186
    Control commands via LAN
        
     190
    / terminals
        
     193
     terminal
        
     197
    T
    wo-window display combination list
        
     198
    Control device password
        
     198
    Upgrade Kit
        
     199
    List of compatible signals
        
     200
    Specifications
        
     204
    Dimensions
        
     208
    Precautions for attaching the Ceiling Mount  Bracket
        
     209
    Index
        
     210  
    						
    							ENGLISH - 5
    Read this first!
    Read this first!
    WARNING:  THIS  APPARATUS MUST BE EARTHED.
    WARNING:  T o prevent damage which may result in fire or shock hazard, do not expose this appliance to rain 
    or moisture.
       This device is n
    
    ot intended for use in the direct field of view at visual display workplaces. To avoid 
    incommoding reflexions at visual display workplaces this device must not be placed in the direct 
    field of view.
       The equipment
    
     is not intended for used at a video workstation in compliance BildscharbV.
    The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
    WARNING:
    1.  
    Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
    2.
    
     
    T
     o prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified 
    service personnel.
    3.
     
    Do not remove the earthing pin on the mains plug. 
     This apparatus is equipped with a three prong earthing-
    type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are 
    unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the 
    earthing plug.
    WARNING:
    This equipment is compliant with Class A of CISPR32.
    In a residential environment this equipment may cause radio interference.
    CAUTION:   T o assure continued compliance, follow the attached installation instructions. This includes using 
    the provided power cord and shielded interface cables when connecting to computer or peripheral 
    devices. Also, any unauthorized changes or modifications to this equipment could void the user’s 
    authority to operate this device.
    This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a 
    domestic environment. Directive 2009/125/EC
    WARNING:  T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 
    TO RAIN OR MOISTURE.
    WARNING:   RISK OF ELECTRIC SHOCK. DON’T  OPEN
    Indicated on the projector
    The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
    user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may 
    be of sufficient magnitude to constitute a risk of electric shock to persons.
    The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
    important operating and maintenance (servicing) instructions in the literature accompanying the 
    product.  
    						
    							6 - ENGLISH
    Read this first!
    Notice on laser
    (for USA and Canada)
    This projector is the Class 3R laser product that complies with IEC 60825-1:2007.
    529
    %125;
    For North America 
    “Complies with 21 CFR Parts 1040.10 and 1040.11
    except for deviations pursuant to Laser Notice
    No.50 dated june 24.2007”
    IEC 60825-1:2007
    LASER RADIATION
    AVOID DIRECT EYE EXPOSURE
    CLASS 3R LASER PRODUCT
    WAVE LENGTH:448-462nm
    MAXIMUM OUTPUT:248mW
    PULSE DURATION:1.1ms
    IEC 60825-1:2007
    RAYONNEMENT LASER
    EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
    APPAREIL À LASER DE CLASSE 3R
    LONGUEURS DONDES:448-462nm
    MAXIMALE DU RAYONNEMENT:248mW
    DUR¬E DE LIMPULSION:1.1ms
    130
     (Inside of product)
    (for India)
    This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.
    529
    (for other countries or regions)
    This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.
    529  
    						
    							ENGLISH - 7
    Read this first!
    CAUTION (North/Middle/South America/Taiwan)
    Power Supply:This Projector is designed to operate on 100   V - 240   V, 50   Hz/60   Hz AC, house current only.
    CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for 
    power supplies up to 125
      V. If you need to use higher voltages than this, you will need to obtain a 
    separate 250
      V power cord. If you use the accessory cord in such situations, fire may result.
    CAUTION (North/Middle/South America/Taiwan)
    This equipment is equipped with a three-pin grounding-type power plug. Do not 
    remove the grounding pin on the power plug. This plug will only fit a grounding-type 
    power outlet. This is a safety feature. If you are unable to insert the plug into the 
    outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
    Do not remove
    WARNING (USA and Canada)
     fNot for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data 
    Processing Equipment, 
    ANSI/NFPA 75.
     fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the 
    building installation wiring.
     fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 
    accessible.
    NOTIFICATION (Canada)
    This class A digital apparatus complies with Canadian ICES-003.
    For USA-California Only
    This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling 
    may apply.
    See www.dtsc.ca.gov/hazardouswaste/perchlorate
    FCC NOTICE (USA)
    Verification
    Model Number: 
     
    PT
     -RZ970B / PT-RZ970W / PT-RZ970LB / PT-RZ970LW / PT-RW930B / PT-RW930W /
     PT
    
    -RW930LB / PT-RW930LW / PT-RX110B / PT-RX110W / PT-RX110LB / PT-RX110LW
    Trade Name: 
     
    Panasonic
    Responsible Party: 
    
     
    Panasonic Corporation of North 
     America
    Address:
     
    T
     wo Riverfront Plaza, Newark, NJ 07102-5490
    General Contact: 
     
    http://www
     .panasonic.com/support
    Projector Contact: 
     
    http://panasonic.net/avc/projector/
    This device complies with Part 15 of the FCC Rules.
    Operation is subject to the following two conditions:
    (1) 
    
    This device may not cause harmful interference, and (2) this device must accept any interference received, 
    including interference that may cause undesired operation.
    Caution:
    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 
    15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
    when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate 
    radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
    harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause 
    harmful interference in which case the user will be required to correct the interference at his own expense.
    FCC Warning:
    To assure continued compliance, follow the attached installation instructions. This includes using the provided 
    power cord and shielded interface cables when connecting to computer or peripheral devices.  Also, any 
    unauthorized changes or modifications to this equipment could void the user ’s authority to operate this device.  
    						
    							8 - ENGLISH
    Read this first!
    IMPORTANT: THE MOLDED PLUG
    FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
    This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse 
    is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating 
    of 13 amps and that it is approved by ASTA or BSI to BS1362.
    Check for the ASTA mark 
     or the BSI mark  on the body of the fuse.
    If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you 
    lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover 
    can be purchased from an Authorized Service Center.
    If the fitted molded plug is unsuitable for the mains socket in your home, then the fuse should be 
    removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the 
    cut off plug is inserted into any 13 amp socket.
    If a new plug is to be fitted, please observe the wiring code as shown below .
    If in any doubt, please consult a qualified electrician.
    WARNING: THIS APPLIANCE MUST BE EARTHED.
    IMPORTANT:The wires in this mains lead are colored in accordance with the following code:
    Green - and - Yellow:  
    Earth
    Blue:
    
     
    Neutral
    Brown:
    
     
    Live
    As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings 
    identifying the terminals in your plug, proceed as follows. The wire which is colored GREEN - 
    
    AND - YELLOW must be connected to the terminal in the plug 
    which is marked with the letter E or by the Earth symbol 
     or colored GREEN or GREEN - AND - 
    YELLOW.
    The wire which is colored BLUE must be connected to the terminal in the plug which is marked 
    with the letter N or colored BLACK.
    The wire which is colored BROWN must be connected to the terminal in the plug which is marked 
    with the letter L or colored RED.
    How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
    (for PT- RZ970BA / PT- RZ970WA / PT- RZ970LBA / PT- RZ970LWA / PT- RW930BA /  
    PT
    -
     RW930WA / PT
    -
     RW930LBA / PT
    -
     RW930LWA / PT
    -
     RX110BA / PT
    -
     RX110WA / 
    PT
    -
    
    RX110LBA / PT
    -
     RX110LWA)
    Declaration of Conformity (DoC)
    This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
    Customers can download a copy of the original DoC for this product from our DoC server: http://www .ptc.panasonic.de
    Contact in the EU: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, 
    Germany
    Importer’s name and address within the European Union
    Panasonic Marketing Europe GmbH
    Panasonic Testing Centre
    Winsbergring 15, 22525 Hamburg, Germany  
    						
    							ENGLISH - 9
    Read this first!
    WARNING:
     rPOWER
    The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible 
    when problems occur. If the following problems occur, cut off the power supply immediately.
    Continued use of the projector in these conditions will result in fire or electric shock, or will cause visual 
    impairment.
     fIf foreign objects or water get inside the projector
    
    , cut off the power supply.
     fIf the projector is dropped or the cabinet is broken, cut of
    
    f the power supply.
     fIf you notice smoke, strange smells or noise coming from the projector
    , cut of
    
    f the power supply.
    Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
    During a thunderstorm, do not touch the projector or the cable.
    Electric shocks can result.
    Do not do anything that might damage the power cord or the power plug.
    If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
     f Do not damage the power cord, make any modifications to it, place it near any hot objects, bend it 
    excessively
    
    , twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
    Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
    Do not use anything other than the provided power cord.
    Failure to observe this will result in electric shocks or fire. Please note that if you do not use the provided power 
    cord to ground the device on the side of the outlet, this may result in electric shocks.
    Completely insert the power plug into the wall outlet and the power conn\
    ector into the projector terminal.
    If the plug is not inserted correctly, electric shocks or overheating will result.
     f Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
    Do not handle the power plug and power connector with wet hands.
    Failure to observe this will result in electric shocks.
    Do not overload the wall outlet.
    If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
    Clean the power plug regularly to prevent it from becoming covered in du\
    st.
    Failure to observe this will cause a fire.
     f If dust builds up on the power plug, the resulting humidity can damage the insulation.
     fIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
    Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly .
     rON USE/INSTALLATION
    Do not place the projector on soft materials such as carpets or sponge m\
    ats.
    Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector
    .
    Do not set up the projector in humid or dusty places or in places where \
    the projector may come into 
    contact with oily smoke or steam.
    Using the projector under such conditions will result in fire, electric shocks or deterioration of components. 
    Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the 
    ceiling to fall down.
    Do not install this projector in a place which is not strong enough to t\
    ake the full weight of the projector 
    or on top of a surface which is sloped or unstable.
    Failure to observe this will cause projector to fall down or tip over the projector , and severe injury or damage 
    could result.
    Do not cover the air intake/exhaust ports or place anything within 500 m\
    m (19-11/16") of them.
    Doing so will cause the projector to overheat, which can cause fire or damage to the projector .
     fDo not place the projector in narrow
    
    , badly ventilated places.
     fDo not place the projector on cloth or papers, as these materials could be drawn into the air intake port.  
    						
    							10 - ENGLISH
    Read this first!
    WARNING:
    Do not look at or place your skin into the light emitted from the lens w\
    hile the projector is being used.
    Do not enter the projection luminous flux using an optical device (such as magnifier or mirror).
    Doing so can cause burns or loss of sight.
     fStrong light is emitted from the projector
    
    ’s lens. Do not look at or place your hands directly into this light.
     fBe especially careful not to let young children look into the lens. In addition, turn of
    f the power and switch 
    of
    
    f the main power when you are away from the projector.
    Do not project an image with the lens cover attached.
    Doing so can cause fire.
    Never attempt to remodel or disassemble the projector.
    High voltages can cause fire or electric shocks.
     f For any inspection, adjustment and repair work, please contact an 
    Authorized Service Center
    
    .
    Doing so may cause exposure to dangerous laser radiation.
     f The laser module is built in this projector
    
    . Follow procedures specified in the Operating Instructions to make 
    operations and adjustments.
    Do not allow metal objects, flammable objects, or liquids to enter inside of the projector . Do not allow 
    the projector to get wet.
    Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the 
    projector.
     f Do not place containers of liquid or metal objects near the projector
    .
     fIf liquid enters inside of the projector
    
    , consult your dealer.
     fParticular attention must be paid to children.
    Use the ceiling mount bracket specified by Panasonic.
    Using the ceiling mount bracket other than the specified one will result in falling accidents.
     f Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
    Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
    If installation is not carried out and secured correctly
    
    , it can cause injury or accidents, such as electric shocks.
     fBe sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the 
    projector from falling down. (Install in a dif
    
    ferent location to the ceiling mount bracket.)
     rACCESSORIES
    Do not use or handle the batteries improperly, and refer to the following.
    Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
     fDo not use unspecified batteries.
     fDo not charge dry cell batteries.
     fDo not disassemble dry cell batteries.
     fDo not heat the batteries or place them into water or fire.
     fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as 
    necklaces or hairpins.
     fDo not store or carry batteries together with metallic objects.
     fStore the batteries in a plastic bag and keep them away from metallic objects.
     fMake sure the polarities (+ and –) are correct when inserting the batteries.
     fDo not use a new battery together with an old battery or mix dif
    ferent types of batteries.
     fDo not use batteries with the outer cover peeling away or removed.
    If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary .
     fBattery fluid on your skin or clothing could result in skin inflammation or injury
    .
    Rinse with clean water and seek medical advice immediately
    
    .
     fBattery fluid coming in contact with your eyes could result in loss of sight.
    In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately
    .
    Do not allow children to reach the batteries.
    Accidentally swallowing them can cause physical harm. 
     f If swallowed, seek medical advice immediately
    
    .
    Remove the depleted batteries from the remote control promptly.
     f Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.  
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Projector PT-RZ970 User Manual