Panasonic Projector PT-RZ970 User Manual

							ENGLISH - 31
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and connections. 
						

							Chapter 2 Getting Started — Setting up
32 - ENGLISH
Setting up
Installation mode
The installation modes of the projector are as follows. Set [FRONT/REAR]/[FLOOR/CEILING] in the 
[PROJECTOR SETUP] menu → [PROJECTION METHOD] (x
  page   119) depending on the installation mode.
Setting on a desk/floor and projecting forward Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Menu itemSetting value Menu itemSetting value
[FRONT/REAR] [FRONT][FRONT/REAR] [REAR]
[FLOOR/CEILING] [AUTO] or [FLOOR] [FLOOR/CEILING][AUTO] or [FLOOR]
Mounting on the ceiling and projecting forward Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu itemSetting value Menu itemSetting value
[FRONT/REAR] [FRONT][FRONT/REAR] [REAR]
[FLOOR/CEILING] [AUTO] or [CEILING] [FLOOR/CEILING][AUTO] or [CEILING]
Portrait setting and projecting forward Portrait setting and projecting from rear
(Using the translucent screen)
Menu itemSetting value Menu itemSetting value
[FRONT/REAR] [FRONT][FRONT/REAR] [REAR]
[FLOOR/CEILING] Set in accordance with the image 
to project. [FLOOR/CEILING]Set in accordance with the image 
to project.
Note
 f
In the portrait setting, the on-screen menu is displayed sideways.
T
o display the on-screen menu vertically, go to the [DISPLAY OPTION] menu  → [ON-SCREEN DISPLAY] (x
  page   110) and change the 
[OSD ROTATION] setting.
 f The projector has a built-in angle sensor

. The attitude of the projector is automatically detected by setting [FLOOR/CEILING] to [AUTO] in 
the [PROJECTOR SETUP] menu → [PROJECTION METHOD].                   
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 33
 rAngle sensor
The range of the installation attitude that is detected by the angle sensor built-in the projector is as follows.
30° 30°
Floor standing installation
Floor standing installation
Projection direction Ceiling mount installation
Parts for installation (optional)
The projector can be installed on the ceiling by combining the optional Ceiling Mount Bracket (Model No.: 
ET
-

PKD120H (for High Ceilings), ET
-
 PKD120S (for Low Ceilings), ET
-
 PKD130H (for High Ceilings, 6-axis 
Adjustment)) and the Ceiling Mount Bracket (Model No.: ET
-

PKD130B (Projector Mount Bracket)).
 fBe sure to use the Ceiling Mount Bracket specified for this projector .
 fRefer to the Installation Instructions of the Ceiling Mount Bracket when installing and setting up the projector .
Attention
 f To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified 
technician.
Projected image and throw distance
Install the projector referring to the projected image size and projection distance. Image size and image position 
can be adjusted in accordance with the screen size and screen position.  The projection relation between the 
screen and the projector differs from that of other lenses, when the Fixed-focus Lens (Model No.: ET
-

DLE030) is 
attached. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
 fFollowing illustration is prepared on the assumption that the projected image size and position have been 
aligned to fit full in the screen.
SD
L (LW/LT) L1
L1
L (LW/LT)
SW SH
H SH
SW
Projected image
Screen
Screen
(Unit: m)
L (LW/LT)*1Projection distance
L1 Lens protrusion dimension
SH Projected image height
SW Projected image width
H Distance from the lens center to the bottom edge of the projected image  
						

							Chapter 2 Getting Started — Setting up
34 - ENGLISH
SDProjected image size
*1 LW: Minimum projection distance when the Zoom Lens is used
LT: Maximum projection distance when the Zoom Lens is used
(Unit: m)
Projection lens Model No. Dimension for L1 (approximate value)
Standard zoom lens 0.043
ET
-

DLE055 0.027
ET
-

DLE085 0.084
ET
-

DLE150 0.044
ET
-

DLE250 0.045
ET
-

DLE350 0.051
ET
-

DLE450 0.095
 rFor the Fixed-focus Lens (Model No.: ET- DLE030)
SH
SW
SD
SH
A1
L3
L4
A2
L1 L2
SW
Projected image Screen
Screen
(Unit: m)
SH Projected image height
SW Projected image width
SD Projected image size
L1 Projection distance (from the screen to the mirror reflection surface
*1)
L2 Distance between the projector and the screen (from the screen to the tip of the lens)
L3 Distance between the projector and the screen (from the screen to the front surface of the projector)
L4 Distance between the projector and the screen (from the screen to the rear surface of the projector)
A1 Distance between the projector and the screen (from the screen bottom edge to the projector top)
A2 Distance between the projector and the screen (from the screen bottom edge to the projector bottom)
*1 The mirror reflection surface cannot be seen from the outside because it is located inside the Fixed-focus Lens.
(Unit: m)
Distance between projector 
and screen Formula
L2 = L1
*1 + 0.023
L3 = L1
*1 - 0.166
L4 = L1
*1 - 0.704
A2 = A1
*1 + 0.200
*1 For details of calculating values, refer to “Formula for calculating the projection distance per projection lens” ( x   page   45).
Attention
 fBefore setting up, read “Precautions for use” ( x   page   17).
Especially when the Fixed-focus Lens (Model No.: ET- DLE030) is used, install the projector so that its back plane is parallel to the screen, 
making the projected image rectangular.
The vertical keystone distortion in moderate range can be corrected with the [POSITION] menu  → [GEOMETRY] → [KEYSTONE] → 
[VERTICAL KEYSTONE] (x
  page   92) even after the projector is installed. For the range that can be corrected, refer to “[GEOMETR Y] 
projection range” ( x
  page   35).
 fThe geometric adjustment function cannot be used when projecting the input signal rotated by 90° while using PT-

RW930 or PT
-
 RX110. 
When installing the projector, follow the following instructions so that distortion does not occur in the projected image.
 g Use a flat screen.  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 35
 gInstall the projector so that the front side of the projector is parallel to the screen. gInstall the projector so that the image can be projected within the range of shift adjustment by moving the lens position.
The 90° rotation of the image can be set in the [DISPLA
Y OPTION] menu → [IMAGE ROTATION].
 fDo not use the projector and the high-powered laser equipment in the same room.  The DLP

 chips can be damaged if a laser beam hits the 
projection lens surface.
[GEOMETRY] projection range
[VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above)
ScreenScreen
Vertical arc correction (viewed from the side) Horizontal arc correction (viewed from above)
ScreenProjection distance
Arc radiusScreen Projection distance
Arc radius
Arc center
Screen
Projection distance
Arc radiusArc centerScreen
Projection distance
Arc radius  
						

							Chapter 2 Getting Started — Setting up
36 - ENGLISH
Standard status
Projection 
lens Model  No. Only [KEYSTONE] used [KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED 
CORRECTION] used
Vertical 
keystone 
correction  angle α (°) Horizontal 
keystone 
correction  angle β (°) Vertical 
keystone 
correction  angle α (°) Horizontal 
keystone 
correction  angle β (°) Min. value of 
R2/L2 Min. value of 
R3/L3 Min. value of 
R2/L2 Min. value of 
R3/L3
Standard 
zoom lens ±40
±15±20±15 0.91.70.5 1
ET
-

DLE030
*1+5 / -0 0 ― ―――――
ET
-

DLE055 ±22 ±15±8±81.7 4.3 12.6
ET
-

DLE085 ±22 ±15±8±81.7 4.3 12.6
ET
-

DLE150 ±40 ±15±20±15 1.12.60.61.5
ET
-

DLE250 ±40 ±15±20±15 0.71.30.40.7
ET
-

DLE350 ±40 ±15±20±15 0.40.80.30.5
ET
-

DLE450 ±40 ±15±20±15 0.30.60.20.3
*1 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
When using the optional Upgrade Kit (Model No.: ET- UK20)
(Only for PT
-
 RZ970)
Projection 
lens Model  No. Only [KEYSTONE] used
*1[KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED 
CORRECTION] used
Vertical 
keystone 
correction  angle α (°) Horizontal 
keystone 
correction  angle β (°) Vertical 
keystone 
correction  angle α (°) Horizontal 
keystone 
correction  angle β (°) Min. value of 
R2/L2 Min. value of 
R3/L3 Min. value of 
R2/L2 Min. value of 
R3/L3
Standard 
zoom lens ±40
±40±20±15 0.71.30.40.7
ET
-

DLE030
*2+5 / -0 0 ― ―――――
ET
-

DLE055 ±22 ±15±8±81.3 3.30.81.9
ET
-

DLE085 ±22 ±15±8±81.3 3.30.81.9
ET
-

DLE150 ±40 ±40±20±15 0.9 20.5 1.1
ET
-

DLE250 ±40 ±40±20±15 0.5 10.3 0.6
ET
-

DLE350 ±45 ±40±20±15 0.30.60.20.4
ET
-

DLE450 ±45 ±40±20±15 0.20.40.20.3
*1 When [VER TICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*2  Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
Note
 f When [GEOMETR Y] is used, the focus of the entire screen may be lost as correction increases. fMake the curved screen a circular arc shape with one part of a perfect circle removed. fAdjustment range of the [GEOMETR

Y] items may not match the listed projection range depending on the projection lens. Use this projector 
within the projection range, otherwise the correction may not work.  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 37
Projection distance of each projection lens
A ±5 % error in listed projection distances may occur.
When [GEOMETR Y] is used, distance is corrected to become smaller than the specified image size.
For PT
-

RZ970
 rWhen the screen aspect ratio is 16:10
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.7-2.4:1 0.38:10.8:1 0.8 - 1.0:1 1.3 - 1.9:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.673 1.077 1.82 2.57 ― ― ― 0.83 0.82 1.04 1.38 2.01
1.52 (60") 0.808 1.292 2.20 3.10 ― ― ― 1.00 1.00 1.25 1.66 2.43
1.78 (70") 0.942 1.508 2.58 3.63 ― ― ― 1.18 1.171.47 1.95 2.84
2.03 (80") 1.077 1.723 2.95 4.16 ― ― ― 1.35 1.351.68 2.23 3.25
2.29 (90") 1.212 1.939 3.334.69 ― ― ― 1.531.52 1.90 2.52 3.66
2.54 (100") 1.346 2.154 3.715.21 0.82 0.11 0.43 1.70 1.70 2.11 2.81 4.08
3.05 (120") 1.615 2.585 4.47 6.27 0.98 0.28 0.53 2.05 2.05 2.55 3.38 4.90
3.81 (150") 2.019 3.231 5.60 7.86 1.23 0.52 0.69 2.58 2.57 3.19 4.24 6.14
5.08 (200") 2.692 4.308 7.50 10.50 1.63 0.93 0.93 3.45 3.44 4.27 5.67 8.20
6.35 (250") 3.365 5.385 9.39 13.14 2.04 1.34 1.18 ― 4.31 5.357.10 10.26
7.62 (300") 4.039 6.462 11.28 15.79 2.45 1.74 1.43 ― 5.18 6.43 8.53 12.33
8.89 (350") 4.712 7.539 13.18 18.43 2.85 2.15 1.69 ― 6.06 7.519.96 14.39
10.16 (400") 5.385 8.616 15.07 21.07 ― ― ― ― 6.93 8.59 11.39 16.45
12.70 (500") 6.731 10.770 18.86 26.36 ― ― ― ― 8.67 10.75 14.25 20.58
15.24 (600") 8.077 12.923 22.64 31.65 ― ― ― ― 10.42 12.91 17.1124.70
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.3-3.6:1 3.6
- 5.4:1 5.4 - 8.6:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.673 1.077 2.42 3.87 3.80 5.81 5.66 9.12 0 - 0.44 0.34
1.52 (60") 0.808 1.292 2.92 4.65 4.59 7.00 6.85 11.01 0 - 0.53 0.40
1.78 (70") 0.942 1.508 3.42 5.44 5.38 8.19 8.04 12.89 0 - 0.62 0.47
2.03 (80") 1.077 1.723 3.92 6.23 6.16 9.38 9.23 14.78 0 - 0.71 0.54
2.29 (90") 1.212 1.939 4.42 7.02 6.95 10.57 10.43 16.66 0 - 0.80 0.61
2.54 (100") 1.346 2.154 4.92 7.81 7.74 11.76 11.62 18.55 0 - 0.89 0.67
3.05 (120") 1.615 2.585 5.91 9.39 9.31 14.14 14.00 22.31 0 - 1.07 0.81
3.81 (150") 2.019 3.231 7.41 11.7511.6817.71 17.58 27.97 0 - 1.33 1.01
5.08 (200") 2.692 4.308 9.91 15.70 15.61 23.66 23.54 37.39 0 - 1.78 1.35
6.35 (250") 3.365 5.385 12.41 19.64 19.55 29.61 29.50 46.81 0 - 2.22 ―
7.62 (300") 4.039 6.462 14.91 23.59 23.49 35.56 35.46 56.24 0 - 2.67 ―
8.89 (350") 4.712 7.539 17.40 27.53 27.42 41.51 41.42 65.66 0 - 3.11 ―
10.16 (400") 5.385 8.616 19.90 31.48 31.36 47.46 47.38 75.08 0 - 3.55 ―
12.70 (500") 6.731 10.770 24.90 39.37 39.23 59.36 59.30 93.93 0 - 4.44 ―
15.24 (600") 8.077 12.923 29.89 47.25 47.11 71.25 71.22 112.77 0 - 5.33 ―
*1 The throw ratio is based on the value during projection of 2.03  m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
38 - ENGLISH
 rWhen the screen aspect ratio is 16:9
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.7-2.4:1 0.38:10.8:1 0.8 - 1.0:1 1.3 - 1.9:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 1.87 2.64 ― ― ― 0.85 0.85 1.07 1.42 2.07
1.52 (60") 0.747 1.328 2.26 3.19 ― ― ― 1.03 1.03 1.29 1.712.49
1.78 (70") 0.872 1.550 2.65 3.73― ― ― 1.21 1.21 1.512.00 2.92
2.03 (80") 0.996 1.7713.04 4.27 ― ― ― 1.39 1.39 1.732.30 3.34
2.29 (90") 1.121 1.992 3.43 4.82 ― ― ― 1.57 1.571.95 2.593.77
2.54 (100") 1.245 2.214 3.82 5.36 0.84 0.14 0.51 1.75 1.752.17 2.89 4.19
3.05 (120") 1.494 2.657 4.60 6.45 1.01 0.30 0.63 2.11 2.10 2.62 3.47 5.04
3.81 (150") 1.868 3.321 5.76 8.08 1.26 0.56 0.81 2.65 2.64 3.28 4.36 6.31
5.08 (200") 2.491 4.428 7.7110.80 1.68 0.97 1.10 3.553.54 4.39 5.82 8.43
6.35 (250") 3.113 5.535 9.6513.51 2.10 1.39 1.39 ― 4.43 5.50 7.29 10.55
7.62 (300") 3.736 6.641 11.60 16.23 2.51 1.81 1.68 ― 5.336.61 8.76 12.67
8.89 (350") 4.358 7.748 13.5518.95 2.93 2.23 1.98 ― 6.23 7.72 10.23 14.79
10.16 (400") 4.981 8.855 15.49 21.66 ― ― ― ― 7.12 8.83 11.70 16.91
12.70 (500") 6.226 11.069 19.38 27.10 ― ― ― ― 8.91 11.05 14.64 21.15
15.24 (600") 7.472 13.283 23.27 32.53 ― ― ― ― 10.71 13.27 17.58 25.39
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.3-3.6:1 3.6
- 5.4:1 5.4 - 8.6:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 2.49 3.97 3.91 5.98 5.82 9.39
-0.06 - 0.46 0.31
1.52 (60") 0.747 1.328 3.00 4.79 4.72 7.20 7.05 11.32-0.07 - 0.55 0.37
1.78 (70") 0.872 1.550 3.515.605.538.43 8.27 13.26-0.09 - 0.64 0.44
2.03 (80") 0.996 1.7714.03 6.41 6.34 9.65 9.50 15.20-0.10 - 0.73 0.50
2.29 (90") 1.121 1.992 4.54 7.22 7.1510.87 10.72 17.13-0.11 - 0.82 0.56
2.54 (100") 1.245 2.214 5.05 8.03 7.96 12.09 11.95 19.07-0.12 - 0.91 0.62
3.05 (120") 1.494 2.657 6.08 9.65 9.58 14.54 14.40 22.94-0.15 - 1.10 0.75
3.81 (150") 1.868 3.321 7.62 12.08 12.00 18.21 18.08 28.75-0.19 - 1.37 0.93
5.08 (200") 2.491 4.428 10.19 16.14 16.05 24.32 24.20 38.44-0.25 - 1.83 1.25
6.35 (250") 3.113 5.535 12.75 20.19 20.10 30.44 30.33 48.12-0.31 - 2.28 ―
7.62 (300") 3.736 6.641 15.32 24.25 24.14 36.55 36.45 57.81-0.37 - 2.74 ―
8.89 (350") 4.358 7.748 17.89 28.30 28.19 42.67 42.58 67.49-0.44 - 3.20 ―
10.16 (400") 4.981 8.855 20.46 32.35 32.24 48.78 48.71 77.18-0.50 - 3.65 ―
12.70 (500") 6.226 11.069 25.59 40.46 40.33 61.01 60.96 96.55-0.62 - 4.57 ―
15.24 (600") 7.472 13.283 30.72 48.57 48.42 73.24 73.21 115.91-0.75 - 5.48 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 39
 rWhen the screen aspect ratio is 4:3
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*12.1-2.9:1 0.46:10.9:1 0.9 - 1.2:1 1.6 - 2.3:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 2.07 2.92 ― ― ― 0.94 0.94 1.18 1.56 2.29
1.52 (60") 0.914 1.219 2.50 3.52 ― ― ― 1.14 1.14 1.42 1.89 2.75
1.78 (70") 1.067 1.422 2.93 4.12 ― ― ― 1.34 1.331.67 2.21 3.22
2.03 (80") 1.219 1.626 3.354.72 ― ― ― 1.54 1.531.91 2.54 3.69
2.29 (90") 1.372 1.829 3.78 5.31― ― ― 1.74 1.732.16 2.86 4.15
2.54 (100") 1.524 2.032 4.21 5.91 0.93 0.22 0.50 1.93 1.93 2.40 3.18 4.62
3.05 (120") 1.829 2.438 5.07 7.11 1.110.41 0.61 2.33 2.32 2.89 3.83 5.55
3.81 (150") 2.286 3.048 6.35 8.91 1.39 0.68 0.78 2.93 2.91 3.62 4.80 6.96
5.08 (200") 3.048 4.064 8.50 11.90 1.85 1.14 1.06 3.92 3.90 4.84 6.42 9.29
6.35 (250") 3.810 5.080 10.64 14.89 2.31 1.60 1.35― 4.89 6.07 8.04 11.63
7.62 (300") 4.572 6.096 12.78 17.88 2.77 2.07 1.63 ― 5.88 7.29 9.66 13.96
8.89 (350") 5.334 7.112 14.93 20.88 3.23 2.53 1.92 ― 6.86 8.51 11.28 16.30
10.16 (400") 6.096 8.128 17.07 23.87 ― ― ― ― 7.85 9.73 12.90 18.63
12.70 (500") 7.620 10.160 21.36 29.85 ― ― ― ― 9.82 12.17 16.13 23.30
15.24 (600") 9.144 12.192 25.64 35.84 ― ― ― ― 11.80 14.62 19.37 27.97
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.7-4.3:1 4.3
- 6.5:1 6.5 - 10.3:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 2.75 4.39 4.32 6.60 6.45 10.37 0 - 0.50 0.38
1.52 (60") 0.914 1.219 3.315.28 5.21 7.95 7.80 12.50 0 - 0.60 0.46
1.78 (70") 1.067 1.422 3.88 6.17 6.10 9.29 9.14 14.63 0 - 0.70 0.53
2.03 (80") 1.219 1.626 4.44 7.07 7.00 10.64 10.49 16.77 0 - 0.80 0.61
2.29 (90") 1.372 1.829 5.01 7.96 7.89 11.99 11.84 18.90 0 - 0.91 0.69
2.54 (100") 1.524 2.032 5.578.85 8.78 13.34 13.19 21.03 0 - 1.01 0.76
3.05 (120") 1.829 2.438 6.71 10.64 10.56 16.03 15.89 25.30 0 - 1.21 0.91
3.81 (150") 2.286 3.048 8.40 13.32 13.24 20.07 19.94 31.70 0 - 1.51 1.14
5.08 (200") 3.048 4.064 11.23 17.78 17.69 26.80 26.69 42.37 0 - 2.01 1.52
6.35 (250") 3.810 5.080 14.06 22.25 22.15 33.54 33.44 53.04 0 - 2.51 ―
7.62 (300") 4.572 6.096 16.88 26.71 26.61 40.27 40.18 63.70 0 - 3.02 ―
8.89 (350") 5.334 7.112 19.71 31.18 31.06 47.01 46.93 74.37 0 - 3.52 ―
10.16 (400") 6.096 8.128 22.54 35.64 35.52 53.74 53.68 85.04 0 - 4.02 ―
12.70 (500") 7.620 10.160 28.19 44.58 44.43 67.21 67.17 106.37 0 - 5.03 ―
15.24 (600") 9.144 12.192 33.85 53.51 53.3580.68 80.67 127.70 0 - 6.04 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
40 - ENGLISH
For PT-RW930
 rWhen the screen aspect ratio is 16:10
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.8-2.5:1 0.40:10.8:1 0.8 - 1.0:1 1.4 - 2.0:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.673 1.077 1.91 2.70 ― ― ― 0.87 0.87 1.09 1.45 2.12
1.52 (60") 0.808 1.292 2.31 3.26 ― ― ― 1.06 1.05 1.32 1.752.55
1.78 (70") 0.942 1.508 2.71 3.81 ― ― ― 1.24 1.23 1.54 2.05 2.98
2.03 (80") 1.077 1.723 3.114.37 ― ― ― 1.42 1.42 1.772.35 3.42
2.29 (90") 1.212 1.939 3.50 4.92 ― ― ― 1.61 1.60 2.00 2.65 3.85
2.54 (100") 1.346 2.154 3.90 5.48 0.86 0.16 0.59 1.79 1.78 2.22 2.95 4.28
3.05 (120") 1.615 2.585 4.70 6.59 1.03 0.33 0.72 2.16 2.15 2.68 3.55 5.15
3.81 (150") 2.019 3.231 5.89 8.25 1.29 0.58 0.92 2.71 2.70 3.36 4.45 6.45
5.08 (200") 2.692 4.308 7.88 11.03 1.711.01 1.25 3.63 3.61 4.49 5.95 8.61
6.35 (250") 3.365 5.385 9.86 13.81 2.14 1.44 1.58 ― 4.53 5.62 7.45 10.78
7.62 (300") 4.039 6.462 11.85 16.58 2.57 1.86 1.91 ― 5.45 6.76 8.95 12.95
8.89 (350") 4.712 7.539 13.84 19.36 3.00 2.29 2.24 ― 6.36 7.89 10.46 15.11
10.16 (400") 5.385 8.616 15.83 22.13 ― ― ― ― 7.28 9.02 11.96 17.28
12.70 (500") 6.731 10.770 19.80 27.68 ― ― ― ― 9.11 11.29 14.96 21.61
15.24 (600") 8.077 12.923 23.78 33.23 ― ― ― ― 10.94 13.5517.96 25.94
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.4-3.8:1 3.8
- 5.7:1 5.6 - 9.0:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.673 1.077 2.54 4.06 4.00 6.11 5.96 9.59
-0.07 - 0.44 0.34
1.52 (60") 0.808 1.292 3.07 4.89 4.83 7.36 7.21 11.57-0.08 - 0.530.40
1.78 (70") 0.942 1.508 3.59 5.72 5.65 8.61 8.46 13.55-0.09 - 0.620.47
2.03 (80") 1.077 1.723 4.12 6.55 6.48 9.86 9.71 15.53-0.11 - 0.710.54
2.29 (90") 1.212 1.939 4.64 7.38 7.3111 . 11 10.96 17.51-0.12 - 0.80 0.61
2.54 (100") 1.346 2.154 5.16 8.20 8.13 12.36 12.21 19.49-0.13 - 0.89 0.67
3.05 (120") 1.615 2.585 6.21 9.86 9.79 14.86 14.72 23.45-0.16 - 1.07 0.81
3.81 (150") 2.019 3.231 7.79 12.35 12.27 18.61 18.47 29.38-0.20 - 1.33 1.01
5.08 (200") 2.692 4.308 10.41 16.49 16.40 24.85 24.73 39.28-0.27 - 1.78 1.35
6.35 (250") 3.365 5.385 13.03 20.63 20.53 31.10 30.99 49.17-0.34 - 2.22 ―
7.62 (300") 4.039 6.462 15.65 24.77 24.67 37.34 37.25 59.06-0.40 - 2.67 ―
8.89 (350") 4.712 7.539 18.28 28.91 28.80 43.59 43.51 68.96-0.47 - 3.11 ―
10.16 (400") 5.385 8.616 20.90 33.05 32.94 49.84 49.76 78.85-0.54 - 3.55 ―
12.70 (500") 6.731 10.770 26.14 41.34 41.20 62.33 62.28 98.64-0.67 - 4.44 ―
15.24 (600") 8.077 12.923 31.39 49.62 49.47 74.82 74.80 118.42-0.81 - 5.33 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.