Pioneer Rvd Xg10 Projector Specifications
Have a look at the manual Pioneer Rvd Xg10 Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Pioneer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
2.2.10 AI Command
----------------------------------------------------------------------------------------------------------------
Function: Audio input setting.
----------------------------------------------------------------------------------------------------------------
Syntax: AIL[CR], AIV[CR], AI1[CR], AI2[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: AUDIO INPUT setup in the ADDITIONAL SET UP menu (when a...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-25.png "Page 26
2.2.10 AI Command
----------------------------------------------------------------------------------------------------------------
Function: Audio input setting.
----------------------------------------------------------------------------------------------------------------
Syntax: AIL[CR], AIV[CR], AI1[CR], AI2[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: AUDIO INPUT setup in the ADDITIONAL SET UP menu (when a...")
![Page 27
2.2.11 SZT/SZE Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture size setting.
----------------------------------------------------------------------------------------------------------------
Syntax: SZT[CR], SZE[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [RESIZE] * Cyclic selection
Main unit: [RESIZE] *...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-26.png "Page 27
2.2.11 SZT/SZE Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture size setting.
----------------------------------------------------------------------------------------------------------------
Syntax: SZT[CR], SZE[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [RESIZE] * Cyclic selection
Main unit: [RESIZE] *...")
![Page 28
2.2.12 DZ Command
----------------------------------------------------------------------------------------------------------------
Function: Digital zooming setting.
----------------------------------------------------------------------------------------------------------------
Syntax: DZON[CR], DZOF[CR], DZMU[CR], DZMD[CR], DZPU[CR], DZPD[CR], DZPL[CR], DZPR[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote:...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-27.png "Page 28
2.2.12 DZ Command
----------------------------------------------------------------------------------------------------------------
Function: Digital zooming setting.
----------------------------------------------------------------------------------------------------------------
Syntax: DZON[CR], DZOF[CR], DZMU[CR], DZMD[CR], DZPU[CR], DZPD[CR], DZPL[CR], DZPR[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote:...")
![Page 30
2.3.1 ZUP/ZDW Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture projection size adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: ZUP[CR], ZDW[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: Undefined (because the motor driving the lens tube is a...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-29.png "Page 30
2.3.1 ZUP/ZDW Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture projection size adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: ZUP[CR], ZDW[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: Undefined (because the motor driving the lens tube is a...")
![Page 31
2.3.2 FUP/FDW Commands
----------------------------------------------------------------------------------------------------------------
Function: Projected picture focus adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FUP[CR], FDW[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: Undefined (because the motor driving the lens tube is a...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-30.png "Page 31
2.3.2 FUP/FDW Commands
----------------------------------------------------------------------------------------------------------------
Function: Projected picture focus adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FUP[CR], FDW[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: Undefined (because the motor driving the lens tube is a...")
![Page 32
2.3.3 VOL Command
----------------------------------------------------------------------------------------------------------------
Function: Volume adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: VOLdd[CR], VOL-[CR], VOL+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 0 to 60 (Default: 10)...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-31.png "Page 32
2.3.3 VOL Command
----------------------------------------------------------------------------------------------------------------
Function: Volume adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: VOLdd[CR], VOL-[CR], VOL+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 0 to 60 (Default: 10)...")
![Page 33
2.3.4 FRQ Command
----------------------------------------------------------------------------------------------------------------
Function: Picture display frequency adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FRQdddd[CR], FRQ-[CR], FRQ+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 264 to 4104 (Both the default value and...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-32.png "Page 33
2.3.4 FRQ Command
----------------------------------------------------------------------------------------------------------------
Function: Picture display frequency adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FRQdddd[CR], FRQ-[CR], FRQ+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 264 to 4104 (Both the default value and...")
![Page 34
2.3.5 PHS Command
----------------------------------------------------------------------------------------------------------------
Function: Picture phase adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: PHSdd[CR], PHS-[CR], PHS+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 0 to 19 (Default: 0)...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-33.png "Page 34
2.3.5 PHS Command
----------------------------------------------------------------------------------------------------------------
Function: Picture phase adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: PHSdd[CR], PHS-[CR], PHS+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 0 to 19 (Default: 0)...")
![Page 35
2.3.6 PSU/PSD/PSL/PSR Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture position shifting adjustment for compensation of lacking part or correction of displayed position.
----------------------------------------------------------------------------------------------------------------
Syntax: PSU[CR], PSD[CR], PSL[CR], PSR[CR]...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-34.png "Page 35
2.3.6 PSU/PSD/PSL/PSR Commands
----------------------------------------------------------------------------------------------------------------
Function: Picture position shifting adjustment for compensation of lacking part or correction of displayed position.
----------------------------------------------------------------------------------------------------------------
Syntax: PSU[CR], PSD[CR], PSL[CR], PSR[CR]...")
![Page 36
2.3.7 ATS Command
----------------------------------------------------------------------------------------------------------------
Function: Automatic picture setup.
----------------------------------------------------------------------------------------------------------------
Syntax: ATS[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [SET UP]
Main unit: [SET UP]...](http://img.usermanuals.tech/thumb/5865/95015/w64_pioneer-rvd-xg10-specs_d-35.png "Page 36
2.3.7 ATS Command
----------------------------------------------------------------------------------------------------------------
Function: Automatic picture setup.
----------------------------------------------------------------------------------------------------------------
Syntax: ATS[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [SET UP]
Main unit: [SET UP]...")
2.3.2 FUP/FDW Commands
----------------------------------------------------------------------------------------------------------------
Function: Projected picture focus adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FUP[CR], FDW[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: Undefined (because the motor driving the lens tube is a DC motor, which is not managed in terms
of numerical values)
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [FOCUS ^], [FOCUS v]
Main unit: [FOCUS ^], [FOCUS v]
----------------------------------------------------------------------------------------------------------------
These commands adjust the picture focusing when the projected picture is out of focus on the screen.
FUP brings the focused point away and FDW brings it nearer.
----------------------------------------------------------------------------------------------------------------
Note: These commands cause only one step of operation per command. Issue the same command repeatedly when
sequential
operations are required.
2.3.3 VOL Command ---------------------------------------------------------------------------------------------------------------- Function: Volume adjustment. ---------------------------------------------------------------------------------------------------------------- Syntax: VOLdd[CR], VOL-[CR], VOL+[CR] ---------------------------------------------------------------------------------------------------------------- Adjustment range: 0 to 60 (Default: 10) ---------------------------------------------------------------------------------------------------------------- Equivalent function:: Remote: [VOL +], [VOL -] Main unit: [VOLUME +], [VOLUME -] ---------------------------------------------------------------------------------------------------------------- This command adjusts the volume. The + sign indicates volume increase and the - sign indicates volume decrease. The current volume setup value can be checked with the GST command. Examples: VOL60[CR] -> Increases the volume. VOL-[CR] -> Decreases the volume by 1 step. VOL+[CR] -> Increases the volume by 1 step. VOL4[CR] -> Decreases the volume. ---------------------------------------------------------------------------------------------------------------- Note: This command can be set only in the AJN status with the menu OFF.
2.3.4 FRQ Command
----------------------------------------------------------------------------------------------------------------
Function: Picture display frequency adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: FRQdddd[CR], FRQ-[CR], FRQ+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 264 to 4104 (Both the default value and adjustment range vary depending on the input signal.)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: FRQ. adjustment in SAMPLE CLOCK in the PICTURE PARAMETER menu (only when a
COMP. input
is selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the display frequency.
If the display frequency is not matching, vertical lines drawn at every other bit look as if there are vertical stripes on
them. The + sign indicates increase in frequency and the - sign indicates decrease in frequency.
The current display frequency can be checked with the GPP command.
Examples: FRQ2000[CR]
FRQ-[CR]
FRQ+[CR]
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status when a COMP. input is selected and the menu is OFF.
The adjustment range is variable depending on the input source.
2.3.5 PHS Command
----------------------------------------------------------------------------------------------------------------
Function: Picture phase adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: PHSdd[CR], PHS-[CR], PHS+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 0 to 19 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: PHS. adjustment in SAMPLE CLOCK of the PICTURE PARAMETER menu (only when a
COMP. input
is selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the picture phase.
If the picture phase is not matching, vertical lines drawn at every other bit look as if there are crushed vertical stripes
on them or the entire picture looks noisy.
The current picture phase can be checked with the GPP command.
Examples: PHS19[CR]
PHS-[CR]
PHS+[CR]
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status when a COMP. input is selected and the menu is OFF.
2.3.6 PSU/PSD/PSL/PSR Commands ---------------------------------------------------------------------------------------------------------------- Function: Picture position shifting adjustment for compensation of lacking part or correction of displayed position. ---------------------------------------------------------------------------------------------------------------- Syntax: PSU[CR], PSD[CR], PSL[CR], PSR[CR] ---------------------------------------------------------------------------------------------------------------- Adjustment range: Variable (Depends on the input signal and FRQ value. Not compatible with the absolute value input.) ---------------------------------------------------------------------------------------------------------------- Equivalent function:: POSITION adjustment in the PICTURE PARAMETER menu (only when a COMP. input is selected) ---------------------------------------------------------------------------------------------------------------- These commands are use to adjust the picture position. Examples: PSU[CR] -> Picture position upward shifting. PSD[CR] -> Picture position downward shifting. PSL[CR] -> Picture position leftward shifting. PSR[CR] -> Picture position rightward shifting. ---------------------------------------------------------------------------------------------------------------- Note: This command is available only in the AJY status when a COMP. input is selected and the menu is OFF.
2.3.7 ATS Command
----------------------------------------------------------------------------------------------------------------
Function: Automatic picture setup.
----------------------------------------------------------------------------------------------------------------
Syntax: ATS[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
Remote: [SET UP]
Main unit: [SET UP]
----------------------------------------------------------------------------------------------------------------
This command causes the set to perform automatic setup of the parameters which are usually adjusted using the FRQ
(2.3.4), PHS (2.3.5) and PSa (2.3.6) commands.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJN status when a COMP. input is selected and the menu is OFF.
Do not switch the input signal during automatic setup.
Some input signals are incompatible with automatic setup. If vertical stripes, flickering and/or noise remain
in the picture after automatic setup using this command, adjust the picture using the FRQ and/or PHS commands.
Digital zooming is deactivated by this command.
2.3.8 CNT Command
----------------------------------------------------------------------------------------------------------------
Function: Picture contrast adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: CNT-dd[CR], CNT-[CR], CNT+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -51 to 0 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: CONTRAST adjustment in the PICTURE PARAMETER menu (when a COMP. input or the
video input
is selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the contrast.
The + sign indicates increase in contrast and the - sign indicates decrease.
The current contrast value can be checked with the GPP command.
Examples: CNT-20[CR] -> Decreases contrast.
CNT-[CR] -> Decreases contrast by 1 step.
CNT+[CR] -> Increases contrast by 1 step.
CNT0[CR] -> Resets contrast to the default value.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF.
2.3.9 BRT Command
----------------------------------------------------------------------------------------------------------------
Function: Picture brightness adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: BRT{+|-}dd[CR], BRT-[CR], BRT+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range:-25 to +25 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: BRIGHTNESS adjustment in the PICTURE PARAMETER menu (when a COMP. input or the
video input
is selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the brightness.
The + sign indicates increase in brightness and the - sign indicates decrease.
The current brightness value can be checked with the GPP command.
Examples: BRT-20[CR] -> Decreases brightness.
BRT25[CR] -> Increases brightness.
BRT-[CR] -> Decreases brightness by 1 step.
BRT+[CR] -> Increases brightness by 1 step.
BRT0[CR] -> Resets brightness to the default value.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF.
2.3.10 COL Command
----------------------------------------------------------------------------------------------------------------
Function: Picture color depth adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: COL{+|-}dd[CR], COL-[CR], COL+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: COLOR adjustment in the PICTURE PARAMETER menu (only when the video input is
selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the color depth.
The + sign indicates increase in color depth and the - sign indicates decrease.
The current color depth value can be checked with the GPP command.
Examples: COL-20[CR] -> Decreases color depth.
COL25[CR] -> Increases color depth.
COL-[CR] -> Decreases color depth by 1 step.
COL+[CR] -> Increases color depth by 1 step.
COL0[CR] -> Resets color depth to the default value.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF.
2.3.11 TNT Command
----------------------------------------------------------------------------------------------------------------
Function: Picture tint adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: TNT-dd[CR], TNT-[CR], TNT+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: TINT adjustment in the PICTURE PARAMETER menu (only when the video input is selected)
----------------------------------------------------------------------------------------------------------------
This command adjusts the tint.
Refer to the following diagram and adjust the tint value in the increasing or decreasing direction according to the
desired tint of the picture.
If the current picture tint is greenish or reddish as shown in the following diagram, adjust the tint value in the opposite
direction to the current tendency.
The current tint value can be checked with the GPP command.
Negative Center Positive
Greenish Yellowish Reddish
Examples: TNT-20[CR] -> Makes the tint greenish.
TNT25[CR] -> Makes the tint reddish.
TNT-[CR] -> Makes the tint more greenish by 1 step.
TNT+[CR] -> Makes the tint more reddish by 1 step.
TNT0[CR] -> Resets the tint to the default value.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status when the NTSC or 4.43 NTSC video input is selected and the
menu is OFF.