Pioneer Rvd Xg10 Projector Specifications

							2.3.12 SHP Command
----------------------------------------------------------------------------------------------------------------
Function: Picture sharpness adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: SHP{+|-}dd[CR], SHP-[CR], SHP+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: SHARPNESS adjustment in the PICTURE PARAMETER menu (only when the video input is
selected)
----------------------------------------------------------------------------------------------------------------
 This command adjusts the sharpness.
 The + sign makes the picture sharper and the - sign makes it softer.
 The current sharpness value can be checked with the GPP command.
  Examples: SHP-20[CR] -> Makes the picture soft.
   SHP25[CR]  -> Makes the picture sharp.
   SHP-[CR]   -> Makes the picture softer by 1 step.
   SHP+[CR]   -> Makes the picture sharper by 1 step.
   SHP0[CR]   -> Resets sharpness to the default value.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF. 
						

							2.3.13 C Command
----------------------------------------------------------------------------------------------------------------
Function: Picture convergence adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: CRL[CR], CRR[CR], CRU[CR], CRD[CR], CBL[CR], CBR[CR], CBU[CR], CBD[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 1 or 2 steps from the factory-set default (which is variable depending on the factory adjustment)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: CONVERGENCE adjustment in the ADDITIONAL SET UP menu (when a COMP. input or the
video input
                     is selected)
----------------------------------------------------------------------------------------------------------------
 This command adjusts the convergence.
 Adjust convergence by displaying a still computer image (such as text, vertical lines or horizontal lines).
    CRL: Adjusts the red by 1 step leftward.
    CRR: Adjusts the red by 1 step rightward.
    CRU: Adjusts the red by 1 step upward.
    CRD: Adjusts the red by 1 step downward.
    CBL: Adjusts the blue by 1 step leftward.
    CBR: Adjusts the blue by 1 step rightward.
    CBU: Adjusts the blue by 1 step upward.
    CBD: Adjusts the blue by 1 step downward.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF. 
						

							2.4 Reset Commands
       Command Name Function
2.4.1  PPMRST, TITRST Adjustment value reset.
2.4.2  LMPRST Lamp life counter reset. 
						

							2.4.1  PPMRST and TITRST Commands
----------------------------------------------------------------------------------------------------------------
Function: Adjustment or setup resetting.
----------------------------------------------------------------------------------------------------------------
Syntax: PPMRST[CR], TITRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
PPMRST: INITIALIZE in the PICTURE PARAMETER menu (when a COMP. input or the video input is
selected)
TITRST: TOTAL INITIALIZE menu (when a COMP. input or the video input is selected)
----------------------------------------------------------------------------------------------------------------
 These commands initialize the adjustment and setup values in the currently displayed picture.
    PPMRST: Resets the picture and picture quality adjustments to the default values.
            When a COMP. input is selected, resets the contrast, brightness, sampling clock count/phase and picture
           position adjustments.
            The COLOR MODE parameters is not reset in this case.
            When the video input is selected, resets the contrast, brightness, color depth, tint and sharpness
           adjustment.
            The VIDEO SYSTEM setup is not reset in this case.
    TITRST: Resets the picture quality, picture and mode setups.
            This command resets the adjustment items reset by PPMRST as well as the following items:
            - Video system (when the video input is selected)
            - Color mode (when a COMP. input is selected)
            - Computer output setup, audio input, background color, screen display and picture reversion.
 The lists of commands that are affected by the reset operations are shown in the next page.
----------------------------------------------------------------------------------------------------------------
Note: These commands are available only in the AJY status with the menu OFF.
When TITRST command is used, the same items in the PPMRST command are valid for only current input.
 For example, when the TITRST command is used with the Video input, the item value, like “CONTRAST”, with COMP.
input   is not cleared but saved. 
						

							The list of commands which is cleared by PPMRST or TITRST.
  Table 6.  PPMRST (When the COMP. 1 or COMP. 2 input is selected)
Command Value After ResetEquivalent Command
FRQdddd(Depends on input)||
PHSdd0PHS0[CR]
PSa(Depends on input)||
CNTdd0CNT0[CR]
BRTdd0BRT0[CR]  Table 7.  PPMRST (When the video input is selected)
CommandValue After ResetEquivalent Command
CNTdd0CNT0[CR]
BRTdd0BRT0[CR]
COLdd0COL0[CR]
TNTdd0TNT0[CR]
SHPdd0SHP0[CR]  Table 8 TITRST
CommandValue After ResetEquivalent Command
CLMa   (Note 1)StandardCLMS[CR]
VSa     (Note 2)AutomaticVSA[CR]
DSPaONDSPY[CR]
RPaStandardRPN[CR]
BGaBlackBG0[CR]
OTaLinkedOTL[CR]
AIaLinkedAIL[CR]  Note 1: When the COMP. 1 or COMP. 2 input is selected
  Note 2: When the video input is selected 
						

							2.4.2.  LMPRST Command
----------------------------------------------------------------------------------------------------------------
Function: Lamp life counter resetting (The operating hours can be checked in the integrator mode.)
----------------------------------------------------------------------------------------------------------------
Syntax: LMPRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: LAMP LIFE COUNTER reset operation in the ADDITIONAL SET UP menu (when a COMP.
input or the
                     video input is selected)
----------------------------------------------------------------------------------------------------------------
 This command resets the lamp life counter to 0 after the lamp replacement.
----------------------------------------------------------------------------------------------------------------
Note: This command is available only in the AJY status with the menu OFF. 
						

							2.5 Integrator Commands (Valid after the integrator mode has started)
2.5.0.  How to Start the Integrator Mode
       Command NameFunction
2.5.1. GIT    Integrator mode setup check
2.5.2. IRC, IGC, IBC Sub-contrast adjustment
2.5.3. IRB, IGB, IBB Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
2.5.0  How to Start the Integrator Mode
  1. In the standby mode (with the main power ON but the standby LED lit in amber), press and hold the SET key.
  2. The standby LED turns off in about 2 seconds. (No LED is lit now.)
3. Release the SET key; the standby LED blinks twice (in about 2 seconds). In this period, press the STANDBY/ON
  key to start up the set.
  4. After the ordinary power ON processing (STARTING UP processing), a picture appears in the integrator mode.
 Note: If the status of item 4 does not occur, return to the standby mode and restart the procedure from step 1.
      Also restart the procedure from step 1 if the 2-second period has elapsed while you do not press the
STANDBY/ON
      key.
5. Input AJY[CR] from RS-232C. (This terminates the integrator mode picture display and initiates the RS-232C
  adjustment in the integrator mode.)
----------------------------------------------------------------------------------------------------------------
Note: It is not possible to start the integrator mode using an RS-232C command. 
						

							2.5.1  GIT Command
----------------------------------------------------------------------------------------------------------------
Function: 1. Picture quality setting when vivid color is selected for COLOR MODE.
          2. Time display of ODD and LAMP LIFE.
----------------------------------------------------------------------------------------------------------------
Syntax: GIT[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: SYSTEM SET UP menu
1. Item selection in VIVID ADJUSTMENT (when a COMP. input is selected)
2. Reference of HOUR METER (when a COMP. input or the video input is selected)
----------------------------------------------------------------------------------------------------------------
 This command becomes available after the set has been started in the integrator mode and AJY[CR] is input.
 Input GIT[CR] to check the COMP. input picture quality setup when vivid color is selected and/or to check the time
information of ODD and LAMP LIFE.
  Examples:
VVD
IRC:- 10 ... RED CONT. adjustment value (See IRC command description.)
IGC:- 20 ... GREEN CONT. adjustment value (See IGC command description.)
IBC:+  0 ... BLUE CONT. adjustment value (See IBC command description.)
IRB:+  0 ... RED BRIGHT adjustment value (See IRB command description.)
IGB:+ 15 ... GREEN BRIGHT adjustment value (See IGB command description.)
IBB:+ 30 ... BLUE BRIGHT adjustment value (See IBB command description.)
ODD:05000H ... Accumulated hours in which the set has been ON (This information cannot be reset.)
LMP:01250H ... Accumulated lamp operating hours since the information was last reset using the LAMP
                     LIFE COUNTER menu in the menu mode after the lamp replacement.
----------------------------------------------------------------------------------------------------------------
Note: The vivid color values are displayed even when the color mode of the current display is STANDARD.
      This command is available only in the AJY status when the menu is OFF after the set has been started in the
     integrator mode.
      The adjustment values for the COMP. inputs are displayed even when the video input is selected. 
						

							2.5.2  IRC, IGC and IBC Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-contrast adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRC{+|-}dd[CR], IRC-[CR], IRC+[CR]
        IGC{+|-}dd[CR], IGC-[CR], IGC+[CR]
        IBC{+|-}dd[CR], IBC-[CR], IBC+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -32 to +31 (Default: 0 with IRC, -14 with IGC and IBC)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: RED CONT., GREEN CONT. and BLUE CONT. adjustments in VIVID ADJUSTMENT of the
SYSTEM
                     SET UP menu (only when a COMP. input is selected)
----------------------------------------------------------------------------------------------------------------
 These commands adjust the sub-contrast.
 The + sign indicates increase in contrast and the - sign indicates decrease.
 The current sub-contrast values can be checked with the GIT command.
  Examples: IRC-20[CR] -> Decreases the contrast of red.
   IGC25[CR]  -> Increases the contrast of green.
   IBC-[CR]   -> Decreases the contrast of blue by 1 step.
   IRC+[CR]   -> Increases the contrast of red by 1 step.
   IGC0[CR]   -> Resets the contrast of green to the default value.
----------------------------------------------------------------------------------------------------------------
Note: These commands are available only in the AJY status with the menu OFF after the set has been started in the
     integrator mode.
      The adjustments are reflected in the picture only when a COMP. input is selected and the color mode is VIVID.
      To adjust the sub-contrast while observing the picture, set the color mode to VIVID before the adjustment. 
						

							2.5.3  IRB, IGB and IBB Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRB{+|-}dd[CR], IRB-[CR], IRB+[CR]
        IGB{+|-}dd[CR], IGB-[CR], IGB+[CR]
        IBB{+|-}dd[CR], IBB-[CR], IBB+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -32 to +31 (Default: 0)
----------------------------------------------------------------------------------------------------------------
Equivalent function:: RED BRIGHT, GREEN BRIGHT and BLUE BRIGHT adjustments in VIVID ADJUSTMENT
of the SYSTEM
                     SET UP menu (only when a COMP. input is selected)
----------------------------------------------------------------------------------------------------------------
 These commands adjust the sub-brightness.
 The + sign indicates increase in brightness and the - sign indicates decrease.
 The current sub-brightness values can be checked with the GIT command.
  Examples: IRB-20[CR] -> Decreases the brightness of red.
   IGB25[CR]  -> Increases the brightness of green.
   IBB-[CR]   -> Decreases the brightness of blue by 1 step.
   IRB+[CR]   -> Increases the brightness of red by 1 step.
   IGB0[CR]   -> Resets the brightness of green to the default value.
----------------------------------------------------------------------------------------------------------------
Note: These commands are available only in the AJY status with the menu OFF after the set has been started in the
     integrator mode.
      The adjustments are reflected in the picture only when a COMP. input is selected and the color mode is VIVID.
      To adjust the sub-contrast while observing the picture, set the color mode to VIVID before the adjustment.