Samsung CLX 8380ND User Manual

4.7   
Loading paper
Loading paper in tray 1, opt ional tray or optional 
high capacity feeder
Load the print media you use for the majority of your print jobs in the 
tray 1. The tray 1 can hold a maximum of 520 sheets of 80 g/m2 (20 lb 
bond) plain paper. 
You can purchase an optional tray and attach it below the standard tray 
to load an additional 520 sheets of paper. (Page 13.1)
1 To load paper, pull and open the paper tray and place paper with the 
side you want to print facing up.
Note
Place the...

4.8   
In the multi-purpose tray
The multi-purpose tray can hold specia l sizes and types of print material, 
such as transparencies, postcards, note  cards, and envelopes. It is useful 
for single page printing on letterhead or colored paper. 
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in  the multi-purpose tray. This also applies to other types of print media.
• Print...

4.9   
4 Squeeze the multi-purpose tray pape r width guides and adjust them 
to the width of the paper. Do not force too much, or the paper will be 
bent, which will result in a paper jam or skew.
5 After loading paper, set the paper type and size for the multi-
purpose tray. See page 4.9 for copying and faxing or the  Software 
section  for PC-printing.
Note 
The settings made from the printer driver override the 
settings on the control panel.
6 After printing, fold the multi-purpose tray extension...

5.1   
5 Copying
This chapter gives you information abo ut using your machine as a copy 
machine.
This chapter includes:
• Understanding the Copy screen
• Copying originals
• Changing the settings for each copy
• Using special copy features
Understanding the Copy screen
When you press  Copy on the  Main screen, the  Ready To Copy  screen 
appears which has several tabs and lots of copying options. All the 
options are grouped by features so t hat you can configure your selections 
easily.
If the screen...

5.2   
Copying originals
This is the normal and usual procedure for copying your originals.
1 Press  Copy from the  Main screen.
2 Place originals, face up, in the  DADF, or you can use the scanner 
glass with a single original document face down.
3 Adjust the settings for each copy such as  Original Size, Reduce/
Enlarge , Duplex  and more. (Page 5.2, Page 5.3) 
4 Select the tray by pressing  the appropriate tray on screen.
5 Enter the number of copies using  the number keypad, if necessary.
6 Press...

5.3   
Reducing or enlarging copies
Press the  Basic tab >  Reduce/Enlarge , then use left/right arrows to 
reduce or enlarge an image on the paper. 
Press  more to see the values.
• Original(100%) : Prints texts or images the same size as originals.
• Auto Fit : Reduces or enlarges the original based on the size of the 
output paper. 
• Other preset values: Allows you to easily select commonly used  values.
Note
The  Custom  option is different depending on where the 
originals is placed. In the DADF,...

5.4   
• Reverse 2 -> 2 Sided : Scans the both sides of originals and prints 
them on both sides of a paper. But the machine reverses the print 
out order of the originals. The machine prints the back sides of 
originals first, which means the front sides of originals is printed on 
the back side of a paper. 
Deciding the form of copy output (Collated / Staple) 
Press the Basic tab > Output, then use left/right arrows  to select Collated or 
Stapled. This feature is supported only  when the original is...

5.5   
4 Press  Start on the control panel.
Then the machine starts scanning the front side.
5 Turn the original over and  place it on the scanner glass, where 
arrows indicate as shown. Then, close the scanner lid. 
6 Press  Start on the control panel to begin copying.
Copying ID with the ma nual ID copy option 
If you want to copy several ID cards on a paper, or adjust the copying 
position of the page, follow the next steps. 
Next steps are the procedure when yo u copy two peoples drivers license...

5.6   
Note
You cannot adjust the copy size using the  Reduce/Enlarge for 
the  N-Up  feature. 
Poster copying
Your original will be divided into 9 portions. You can paste the printed 
pages together to make one poster-siz ed document. This copy feature is 
available only when you place originals on the scanner glass. Each 
portion is scanned and printed on by one in the following order. 
1 Place a single original face down on the scanner glass. (Page 4.1) 
Note
The original must be placed on the...

5.7   
Note
To remove shadows of a book edge, press the  Image tab > 
Erase Edge  > Book Center and Edge Erase .
4 Select the binding option.
•Off : Disables this feature.
• Left Page : Prints left page of the book.
• Right Page : Prints right page of the book.
• Both Page : Prints both facing pages of the book.
5 Press  OK.
6 Press  Start on the control panel to begin copying.
Booklet copying
The machine automatically prints on one or both sides of the paper, which 
are then folded to produce a booklet...