Samsung Convoy 2 Instruction Manual

							Settings       115
 Key Setting: Select the method for launching Voice Commands.
–Choose Voice Key Only to launch with the Voice Commands key.
–Choose Voice Key/Headset to launch with the Voice Commands key, 
OR with headset controls when you attach an optional headset.
–Choose Voice Key/Flip to launch with the Voice Commands key, OR 
when you flip the phone open.
 About: View information about Voice Commands. 
Language
Choose a language for your phone’s displays.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Language.
2.Highlight a language, then press   SET to save the 
setting.
Location Detection
Choose whether your phone’s GPS (Global Positioning System) 
location is available to the network at all times, or only when 
you’ve dialed an Emergency Number, such as 911.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Location 
Detection
.
2.Highlight a setting, then press   SET to save the 
setting:
: GPS location is on whenever the feature is available.
 E911 Only: GPS location turns on only when you dial 911.
Current Countr y
Select your current location, to allow the phone to apply the 
correct country code when dialing.
Note: If you travel to a different country, the network may not report the 
correct location. In that case, you will see the message PLEASE VERIFY YOUR CURRENT LOCATION.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Current Country.
2.Highlight a country from the list, then press   SET. 
						

							116
Security
Lock your phone, set restrictions, and choose other security 
options.
Access to all Security settings requires the phone’s Lock Code. 
By default the Lock Code is the last four digits of your number.
Important!: For security reasons, your phone does not display lock codes. If 
you change the lock code, be sure to record the new code for 
future reference.
Edit Codes
Set a new Phone Only lock code (for unlocking and locking the 
phone), or Calls & Services lock code (for restricting access to 
calls and other features).
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Choose Edit Codes, then highlight a code:
 Phone Only: Enter a new lock code at the prompt, then enter the 
new code again to confirm the change.
 Calls & Services: Enter a new lock code at the prompt, then enter 
the new code again to confirm the change.
Restrictions
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Select Restrictions.
4.Enter the Calls & Services lock code at the prompt. The 
default lock code is the last four digits of your phone 
number.
5.Choose Location setting for these options:
 Unlock Setting: Allow changes to the Location setting with no 
code.
 Lock Setting: Require the Calls & Services lock code to change the 
Location setting.
6.Choose Calls for these options:
 Incoming Calls: Choose Allow All to allow all incoming calls. 
Choose Contacts Only to allow calls from numbers stored in 
Contacts. Choose Block All to block all incoming calls.
 Outgoing Calls: Choose Allow All to allow all outgoing calls. 
Choose Contacts Only to allow calls from numbers stored in 
Contacts. Choose Block All to block all outgoing calls. 
						

							Settings       117 7.
Choose Messages for these options:
 Incoming Messages: Choose Allow All to allow all incoming 
messages. Choose Block All to block all incoming messages.
 Outgoing Messages: Choose Allow All to allow all outgoing 
messages. Choose Block All to block all outgoing messages.
8.Choose Dial-Up Modem, to Allow or Block use of your 
phone as a modem.
 Phone Lock Setting
Set the locking behavior of your phone. When the phone is 
locked, you must enter the Phone Only lock code to use it, except 
when dialing emergency numbers.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Select Phone Lock Setting for these options:
 Unlocked: The phone is unlocked at all times.
: The phone is automatically locked when you turn it 
on. You can make emergency calls, but must enter the Phone Only 
lock code to access other features.
Lock Phone Now
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Select Lock Phone Now. The phone locks and returns to the 
home screen. To unlock the phone, press Unlock and enter 
the Phone Only lock code. 
						

							118
Restore Phone
Return all phone settings to the factory defaults and permanently 
erase all user information.
Warning!: Choosing Restore Phone will return your phone to the default 
settings and permanently erase all your entries and information 
saved on the phone, including pictures, videos, music, messages, 
contacts and downloaded applications.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Select Restore Phone.
4.At the prompt, highlight Ye s, then press   OK to 
restore default settings.
Note: After the phone power cycles back on, press *228 and press the Send 
Key to connect to the network and program your phone with default 
network settings.
Reset Settings
Return all phone settings to the factory defaults.
Note: Choosing Reset Settings will return your phone to the default settings, but does not delete your entries and information.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Security.
2.Enter the Phone Only lock code at the prompt. The default 
lock code is the last four digits of your phone number.
3.Select Reset Settings.
4.At the prompt, highlight Ye s, then press   OK to 
restore default settings.
Note: After the phone power cycles back on, press *228 and press   to 
connect to the network and program your phone with default network 
settings. 
						

							Settings       119
Global Data Roaming Access
Set preferences for data access when your phone is outside the 
home network area.
Important!: Accessing data services while roaming may result in significant charges. Consult Verizon Wireless for more information.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ Global Data 
Roaming Access
.
2.Choose a setting, then press   SET:
 Allow Access for All Trips: Enable access to data networks at any 
time, by any application.
 Allow Access only for this Trip: Enable access to data network 
currently available.
 Deny Data Roaming Access: Block data usage while roaming.
System Select
Set preferences for roaming behavior.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ System Select.
2.Choose a setting:
: Restrict the phone’s operation to your home network, 
with no roaming. When outside the coverage area, call functions 
and other features are not available.
: Allow the phone to automatically acquire service, using 
the Verizon Wireless network and the networks of roaming 
partners.
NAM Select
Select the primary NAM (Number Assignment Module).
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Settings ➔ NAM Select.
2.Highlight an option, then press   OK:
 NAM Select: Choose NAM1 or NAM2.
 Auto NAM Select: Choose Enable to allow automatic NAM 
selection,or Disable to use the NAM Select setting. 
						

							120
Call Settings
Customize settings related to placing and receiving calls.
Answer Options
Select a method for answering incoming calls.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Answer options.
2.Use the Directional Key   to highlight option(s) and 
press  
MARK to mark them for selection, or press the 
Right Soft Key  Mark All:
 Flip Open: Answer incoming calls by flipping the phone open.
: When the phone is open, answer calls by pressing any 
key.
 Auto w/ Handsfree: Incoming calls are answered automatically, 
after a short delay.
3.Press the Left Soft Key  Done to save the settings.
Auto Retr y
Select settings for automatic redialing of unanswered calls.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Auto Retry.
2.Select a time period, or choose Off for no automatic retries.
3.Select an option and press   SET.
TTY Mode
Your phone is fully TTY compatible, allowing you to connect a TTY 
device to the phone’s headset jack. To use your phone with a TTY 
device, enable TTY Mode.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ TTY Mode.
2.Highlist Ye s, then press   OK to enable TTY.
3.Follow the prompts to select a TTY mode, from TTY Full, 
TTY + Talk (VCO), TTY + Hear (HCO), or TTY Off. 
						

							Settings       121
One Touch Dial
One Touch Dial controls the speed dial feature of your phone. You 
must turn One Touch Dial On to use speed dials on the phone. For 
more information about creating speed dials, see “Speed Dials” 
on page 45.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ One Touch Dial.
2.Highlight On or Off and press   SET. 
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
When enabled, voice signals are encrypted for enhanced privacy.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Voice Privacy.
2.Highlight On or Off and press   SET. 
Data Settings
Select a port for connecting the phone to a PC, and set maximum 
connection speed.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Data Settings.
2.Configure these data settings:
 Select Port: Choose USB to allow connections via the USB port, Bluetooth to allow connections via Bluetooth, or NULL to prevent 
connections. Press SET to save the setting.
: Choose a speed, from  Auto, 19200, 38400, 57600, 115200, or 230400. Press SET to save the setting.
DTMF Tones
Set DTMF tone length. DTMF tones are used as input by some 
automated phone systems, where you may need to transmit 
DTMF tones to make selections.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ DTMF Tones.
2.Highlight Normal or Long, then press   SET.  
						

							122
PTT Mode
Turn PTT Mode On or Off.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ PTT Mode.
2.Highlight On or Off, then press   SET. 
Note: You can also set PTT Mode from Settings & Tools ➔ PTT Settings ➔ PTT Mode.
Assisted Dialing
Assisted dialing makes international dialing easier, by inserting 
the appropriate access codes automatically, based on the 
Reference Country .
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Assisted Dialing.
2.Use the Directional Key   to highlight On or Off.
3.Press  SET. 
Note: When Assisted Dialing is On, the home screen will display “Assisted On” when dialing an international number.
Fake Call
Use the Fake Call feature to cause your phone to ring with a fake 
call any time you press the   Volume Key down four 
times quickly.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Fake Call.
2.Configure these options:
 Fake Call On/Off: Choose On to enable or or Off to disable the Fake 
Call feature. 
 Fake Call Timer: Choose the length of time, to elapse between 
pressing the Volume Key down 4 times and the ringing of the Fake 
Call.
 Fake Call Voice: Choose No Voice to have no audio through the 
earpiece when you answer a Fake Call, or Use Fake Call Voice to 
choose sound to play via the earpiece when you answer a fake call. 
: Enter fake contact information to appear in the 
phone’s display when a Fake Call is ringing.
Noise Cancellation
Enable Noise Cancellation to minimize the effect of noisy 
environments on voice quality in calls.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Call Settings ➔ Noise Cancellation.
2.Select On or Off, then press   SET. 
						

							Settings       123
Memory
Manage memory settings for saving pictures, videos, music, 
sounds and ringtones to your phone’s memory, or to an optional 
installed memory card.
Note: Your phone does not include a memory card.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Memory.
2.Configure these options:
: Set the default save location for Pictures, Videos, 
and sounds to Phone Memory or Card Memory.
 Phone Memory: View and manage usage of your phone’s internal 
memory.
–Phone Memory Usage: Memory usage and allocation for the phone’s 
internal memory.
–My Pictures: Pictures saved in the phone’s internal memory. 
–My Videos: Videos saved in the phone’s internal memory. 
–My Ringtones: Ringtones saved in the phone’s internal memory. 
–My Music: Music saved in the phone’s internal memory. 
–My Sounds: Sounds saved in the phone’s internal memory.
–My Contacts: Contacts saved in the phone’s internal memory. 
–Move All To Card: Move all files from the phone’s memory to 
anoptional installed memory card.
: View and manage memory usage of an optional 
installed memory card.
–Phone Memory Usage: Memory usage and allocation for the memory 
card.
–My Pictures: Pictures saved on the memory card.
–My Videos: Videos saved on the memory card.
–My Ringtones: Ringtones saved on the memory card. 
–My Music: Music saved on the memory card. 
–My Sounds: Sounds saved ion the memory card.
–My Contacts: Contacts saved ion the memory card.
–Move All To Phone: Move all files from the memory card to the 
phone’s internal memory.
–Format Card: Permanently erase all contents on the card, and prepare 
the card for use in the phone. 
						

							124
USB Mode
Use the USB Mode setting to set the functionality when you 
connect your phone to a PC with a USB cable.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ USB Mode.
2.Highlight a setting, then press   SET:
 USB Mass Storage: Enable access to your phone’s memory, and 
an optional installed memory card.
: Enable the use of your phone as a modem for other 
devices, such as computers. This may require additional service 
activation, available from Verizon Wireless.
: When you attach your phone to a device via USB, 
you’ll be prompted to choose the USB mode.
Phone Info
View software and hardware information for your phone, your 
assigned telephone number, an icon glossary, and manage 
software updates.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Phone Info.
2.Choose My Number  to display the Mobile Device and 
Identification numbers.
3.Choose SW/HW Version to view version information about 
your phone’s software. 
4.Choose Icon Glossary to view the list of icons with a brief 
description.
5.Choose Software Update to check the status of your 
phone’s software and to check for view new software 
updates that you can download for your phone.