Samsung Convoy 2 Instruction Manual

							Call Functions       25
Driving Mode
When Driving Mode is enabled, your phone uses sounds to alert 
you to notifications, regardless of other phone or call settings.
For example, when you receive a call or message, your phone 
reads out the caller’s (or sender’s) name and number, and Call 
Alert sounds will play, even if you have set Master Volume to 
Sounds Off or Vibrate Only.
Enabling Driving Mode with Voice Commands
1.From the Home screen, press the   Voice Commands/
Flashlight
 Key. 
2.At the audio prompt, say “Driving Mode On”.
Enabling Driving Mode with the Speakerphone Key
With the phone closed, press and hold the
  
Speakerphone Key.
Enabling Driving Mode in Settings
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ Sounds Settings ➔ Driving Mode.
2.Choose a setting:
 Caller ID Only: Reads Caller ID for incoming calls and messages.
 ID & Message: Reads Caller ID and the message content for 
incoming messages.
: Disable Driving Mode. 
						

							26
Section 4: Push-to-Talk (PTT) Functions
If you depend on instant communication, choose Verizon Wireless 
Push-to-Talk (PTT). Whether at home, in the office or across the 
country, you can quickly connect with one or multiple users at 
the same time with just a push of a button. Plus, you can make 
regular voice calls on the Verizon Wireless network.
For Alert calls, press the   
PTT/Side Key send an alert to the 
recipient to notify them about a call. The recipient can choose to 
respond and begin the conversation, then you alternate pressing 
and holding the   
PTT/Side Key while speaking, and 
releasing the key to listen.
Alternatively, you can place a Barge call by pressing the 
 
PTT/Side Key to hear a tone, then pressing and holding the 
key while speaking. In this case, your voice will be broadcast 
instantly over the recipient’s speaker.
Enabling PTT Mode on Your Phone
You must contact Verizon Wireless to activate Push-to-Talk 
service on your account. Once Push-to-Talk service has been 
activated, please follow these steps to enable Push-to-Talk on 
your phone.
1.From the Home screen, select   MENU ➔ 
 
Settings & Tools ➔ PTT Settings ➔ PTT Mode.
2.Select On to enable PTT Mode, or Off to disable.
Making PTT Calls
Your phone offers multiple ways to make PTT calls:
Enter a PTT number on the Keypad. For more information, see “Making PTT Calls Using the Keypad” on page 27.
Call a PTT Contact from Contacts. For more information, see “Making 
PTT Calls from Contacts” on page 28.
Make a call to a PTT Group or PTT Temp Group from Contacts. For 
more information, see “Making PTT Group Calls from Contacts” 
on page 29.
Return a call, or call a recent caller via Recent Calls. For more 
information, see “Making PTT Calls From Recent Calls” on 
page 30. 
						

							Push-to-Talk (PTT) Functions       27
Making PTT Calls Using the Keypad
Making Barge Calls
1.From the Home screen, enter the number on the keypad.
2.Press the   PTT/Side Key. A tone plays and 
“
Connected to” displays. 
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call.
Making Aler t Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Highlight a PTT contact, then press the Left Soft Key 
 
Alert, then the   PTT/Side Key to send an alert 
to the recipient. If the recipient answers the call, 
“
Connected to” displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen.
6.Press the   End/Power Key to end the call. 
						

							28
Making PTT Calls from Contacts
Tip: You can also make PTT calls with the phone closed, using the 
Speakerphone. Press the PTT/Side Key to start, then use the external 
keys to find a PTT contact, group or call record and make the call.
To end a call, press and hold the Speakerphone Key.
Making Barge Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Highlight a PTT contact, then press the   PTT/Side 
Key
. A tone plays and “Connected to” displays.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call.
Making Aler t Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Highlight a PTT contact, then press the Left Soft Key 
 
Alert, then the   PTT/Side Key to send an alert 
to the recipient. If the recipient answers the call, 
“
Connected to” displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen.
6.Press the   End/Power Key to end the call. 
						

							Push-to-Talk (PTT) Functions       29
Making PTT Group Calls from Contacts
Tip: You can also make PTT calls with the phone closed, using the 
Speakerphone. Press the PTT/Side Key to start, then use the external 
keys to find a PTT contact, group or call record and make the call.
To end a call, press and hold the Speakerphone Key.
Making Barge Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Highlight a PTT contact, then press the   PTT/Side 
Key
. A tone plays and “Connected to” displays.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call.
Making Aler t Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Highlight a PTT contact, then press the Left Soft Key 
 
Alert, then the   PTT/Side Key to send an alert 
to the recipient. If the recipient answers the call, 
“
Connected to” displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen. 
						

							30
Making PTT Calls From Recent Calls
Tip: You can also make PTT calls with the phone closed, using the 
Speakerphone. Press the PTT/Side Key to start, then use the external 
keys to find a PTT contact, group or call record and make the call.
To end a call, press and hold the Speakerphone Key.
Making Barge Calls
1.From the Home screen, press the   Send Key.
2.Highlight a PTT call, then press the   PTT/Side Key. A 
tone plays and “
Connected to” displays.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call.
Making Aler t Calls
1.From the Home screen, press the   Send Key.
2.Highlight a PTT contact, then press the Left Soft Key 
 
Alert, then the   PTT/Side Key to send an alert 
to the recipient. If the recipient answers the call, 
“
Connected to” displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen.
6.Press the   End/Power Key to end the call. 
						

							Push-to-Talk (PTT) Functions       31
Making PTT Group Calls
You can start or participate in a group call with up to 50 
participants. Your phone offers several methods for making group 
calls:
Choose a PTT Group from Contacts.
Select a group call saved in Recent Calls.
Select and/or enter numbers for a one-time call.
During a Group call, the following information may appear on 
your screen, depending on your coverage area and the coverage 
of participants, and your service plan:
The name of the Group, if it is a group call to a PTT Group.
The name or PTT number of the person speaking.
The number of group members who are connected on the call out of 
the number invited.
Note: For information about creating PTT Groups in Contacts, see “PTT Groups” on page 51.
Making a PTT Group Call
Tip: You can also make PTT calls with the phone closed, using the 
Speakerphone. Press the PTT/Side Key to start, then use the external 
keys to find a PTT contact, group or call record and make the call.
To end a call, press and hold the Speakerphone Key.
Making Barge Calls
1.From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Groups.
2.Highlight a PTT Group, then press the   PTT/Side Key. 
A tone plays and and “
Connected to” displays.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call. 
						

							32
Making Aler t Calls
1.From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Groups.
2.Highlight a PTT Group, then press the Left Soft Key 
 
Alert, then the   PTT/Side Key to send an alert 
to the group. If a recipient answers the call, “
Connected to” 
displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen.
6.Press the   End/Power Key to end the call.
Making a PTT Group Call From Recent Calls
Tip: You can also make PTT calls with the phone closed, using the 
Speakerphone. Press the PTT/Side Key to start, then use the external 
keys to find a PTT contact, group or call record and make the call.
To end a call, press and hold the Speakerphone Key.
Making Barge Calls
1.From the Home screen, press the   Send Key to display 
Recent Calls.
2.Highlight a PTT Group call record, then press the   
PTT/Side Key. A tone plays and and “Connected to” 
displays.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Press the   End/Power Key to end the call. 
						

							Push-to-Talk (PTT) Functions       33
Making Aler t Calls
1.From the Home screen, press the   Send Key to display 
Recent Calls.
2.Highlight a PTT Group call record, then press the Left Soft 
Key
  Alert, then the   PTT/Side Key to send an 
alert to the group. If a recipient answers the call, 
“
Connected to” displays on your phone’s screen.
3.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
4.Release the   PTT/Side Key to listen.
5.Alternate between pressing and holding the   PTT/
Side Key
 to talk, and releasing the PTT/Side Key to listen.
Making a PTT Group Call using a Temp Group
To set up a one-time PTT group call, use a Temp PTT Group.
Making Barge Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Press the Right Soft Key Options ➔ Temp PTT Group.
3.Press  ADD to select PTT Contacts.
4.Press the   PTT/Side Key. A tone plays and and 
“
Connected to” displays.
5.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
6.Press the   End/Power Key to end the call. 
						

							34
Making Aler t Calls
1.Press the   PTT/Side Key to display the PTT Contact 
List.
– or –
From the Home screen, select   MENU ➔ 
 
Contacts ➔ PTT Contact List.
2.Press the Right Soft Key  Options ➔ Temp PTT Group.
3.Press  ADD to select PTT Contacts.
4.Press the Left Soft Key  Alert, then the   PTT/
Side Key
 to send an alert to the group. If a recipient 
answers the call, “
Connected to” displays on your phone’s 
screen.
5.Press and hold the   PTT/Side Key, and begin talking. 
“
Talking to” displays on your phone screen.
6.Release the   PTT/Side Key to listen.
7.Press the   End/Power Key to end the call.
Answering Push-to-Talk Calls
When you receive a PTT call, your phone plays a tone or vibrates 
to alert you to the call, and the caller’s number or name (if the 
number is stored as a contact) displays on the screen.
Tip: PTT calls are automatically connected when the phone is closed. Press 
the PTT/Side Key to initiate talking.
To end a call, press and hold the Speakerphone Key.
Answering Barge Calls
In a “barge” call, the caller presses the PTT key on their phone to 
establish a call, and can immediately begin talking.
1.A tone plays, then the caller will proceed with the call. 
“
Connected to” displays on your phone’s screen, then 
“
Listening to” while the caller is talking.
2.Press the   End/Power Key to end the call.