Samsung Le 26r51b Owners Instructions

English-9
Viewing the Remote Control(Teletext Functions)
Exit from the teletext display P:
 T eletext next page
P:  T eletext previous page
Teletext Function : Refer to pages 52-54 for details
Teletext display/mix both teletext
information and the normal broadcast
T eletext sub page
Teletext cancel
Teletext hold
Teletext mode selection
(LIST/FLOF)
T eletext reveal
Teletext index
Teletext size selectionTeletext store
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 9
 

English-10
Installing Batteries in the Remote Control
1Slide the cover out completely.
2Install two AAA size batteries.
Makesure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3Replace the cover.
Remove the batteries and store them in a cool, dry placeif you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control...

English-11
Switching On and Off
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWERbutton on the remote control.
Result
:The screen is turned off and a red standby indicator
appears on the front of your set.
2To  switch your set back on, simply press the POWER, numeric
buttons (0~9) or channel up/down ( / ) button again.
Do not leave your set in standby...

English-12
Becoming Familiar with the Remote Control
The remote control is used mainly to:Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the -next stored channel.
Used to display the -previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit must be pushed immediately...

English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1If the set is in standby mode, press the POWERbutton on the
remote control.
Result
: The messageStart Plug & Play.is displayed. It
appears for a little while, and then theLanguagemenu
is automatically displayed.
2Select the appropriate languageby pressing the  or  button.
The available languages are listed
.Y ou can choose one of 21...

English-14
Plug and Play
If you want to reset this feature...
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the  or  button to select Setup.
Press theENTERbutton. 
Result:The options available in the Setupgroup are displayed.
3The Plug & Playis selected.
4Press theENTERbutton.
Result:The message Start Plug & Play. is displayed.
5For further details on how to set, refer to the previous page.
Choosing Your Language
When you start using your set for the first time, you must select the...

English-15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability\
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the  or  button to select Channel.
Result
:The options available in the Channelgroup are displayed.
3Press...

You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Channel.
Result
:The options available in the Channelgroup are
displayed.
3Press the ENTERbutton.
4Press the or  buttonto select Manual Store.Press theENTERbutton....

8If you know the number of the channel to be stored,Press the or  button to select 
Channeland then press the ENTERbutton.
Select 
C(Air channel) or S(Cable channel) by pressing the 
or button.
Press the  button to select channel.
Select the required number by pressing the or  button and
then press the 
ENTERbutton.
If there is an abnormal sound or no sound, re-select the sound
system required.
Y ou can also set a 
channelby pressing number buttons on the
remote control.
9If you do not know the channel...

You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Channel.
Press the ENTERbutton.
Result:The options available in the Channelgroup are
displayed.
3Press the or  button to select Add/Delete.Press the ENTERbutton....