Samsung Le 26r51b Owners Instructions

							English-9
Viewing the Remote Control(Teletext Functions)
Exit from the teletext display P:
 T eletext next page
P:  T eletext previous page
Teletext Function : Refer to pages 52-54 for details
Teletext display/mix both teletext
information and the normal broadcast
T eletext sub page
Teletext cancel
Teletext hold
Teletext mode selection
(LIST/FLOF)
T eletext reveal
Teletext index
Teletext size selectionTeletext store
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 9
 
						

							English-10
Installing Batteries in the Remote Control
1Slide the cover out completely.
2Install two AAA size batteries.
Makesure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3Replace the cover.
Remove the batteries and store them in a cool, dry placeif you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work!
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 10
 
						

							English-11
Switching On and Off
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWERbutton on the remote control.
Result
:The screen is turned off and a red standby indicator
appears on the front of your set.
2To  switch your set back on, simply press the POWER, numeric
buttons (0~9) or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when yo\
u are
away on holiday, for example). 
It is best to unplug the set from the mains and aerial.
The mains lead is attached to the rear of your set.
If you purchased this set in the United Kingdom,
refer to page 65 for further instructions on plug wiring.
1Plug the mains lead into an appropriate socket.
Result
:The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60Hz.
2Press the POWERbutton on the front of the panel.
Result
:The programme that you were watching last is reselected
automatically.
3Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or  button on the right side of the
panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4To  switch your set off, press the POWERbutton again.
Placing Your Television in Standby Mode
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 11
 
						

							English-12
Becoming Familiar with the Remote Control
The remote control is used mainly to:Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the -next stored channel.
Used to display the -previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit must be pushed immediately after the first. 
Failure to do this will result in a single digit 
channel being displayed.
Used to increase the-volume.
Used to decrease the-volume.
MUTEUsed to switch the sound off temporarily. 
To turn the sound back on, press this button
again, or press the  / button.
MENUUsed to display the Used to return to the   
on-screen menu system. previous menu or 
normal viewing.
EXITUsed to exit the on-screen menu system.  
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
-Used to confirm yourENTERchoice.
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 12
 
						

							English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1If the set is in standby mode, press the POWERbutton on the
remote control.
Result
: The messageStart Plug & Play.is displayed. It
appears for a little while, and then theLanguagemenu
is automatically displayed.
2Select the appropriate languageby pressing the  or  button.
The available languages are listed
.Y ou can choose one of 21 languages.
3Press the ENTERbutton to confirm your choice.
Result
: The messageCheck antenna input.is displayed with
theOKselected.
4Press the ENTERbutton.
Result
: The following areas are available:Belgium - France - Germany -  Italy - 
Netherlands - Spain - Sweden - Switzerland - 
United Kingdom - Eastern Europe- Others
5Select your Country by pressing the  or  button.
Press the ENTERbutton.
Result
:The Auto Storemenu is displayed with the
Start selected.
6Press the ENTERbutton.
Result
:The channel search will start and end automatically.
7Press the ENTERbutton.
Select the houror minuteby pressing the or  button.
Set the houror minuteby pressing the  or  button.
(Refer to “Setting and Displaying the Current Time” on page 40)
8Press the ENTERbutton to confirm your setting.
Result
:Themessage Enjoy your watching.is displayed, and
then the channel which has been stored will be activated.
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 13
 
						

							English-14
Plug and Play
If you want to reset this feature...
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the  or  button to select Setup.
Press theENTERbutton. 
Result:The options available in the Setupgroup are displayed.
3The Plug & Playis selected.
4Press theENTERbutton.
Result:The message Start Plug & Play. is displayed.
5For further details on how to set, refer to the previous page.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the  or  button to select Setup.
Result
:The options available in the Setupgroup are displayed.
3Press theENTERbutton. 
4Press the  or  buttonto select Language.Press theENTERbutton.
Result:The available languagesare listed.
5Select a particular language by pressing the  or  button
repeatedly.
Press the
ENTERbutton. 
Y ou can choose one of 21 languages.
6When you are satisfied with your choice, press the EXITbutton to
return to normal viewing.
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 14
 
						

							English-15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability\
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the  or  button to select Channel.
Result
:The options available in the Channelgroup are displayed.
3Press theENTERbutton. 
Result:The Countryis selected.
4Press theENTERbutton again.  Select your Countryby pressing the or button repeatedly.
Result:The following countries are available:Belgium - France - Germany -  Italy - 
Netherlands - Spain - Sweden - Switzerland - 
United Kingdom - Eastern Europe- Others
5Press theENTERbutton. 
6Press the or  button to select Auto Store. 
Press theENTERbutton. 
Result: The Auto Storemenu is displayed with the Start selected.
7Press the ENTERbutton to search the channels. The sub menu
is changed fromStarttoStopwith channel search started.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last). 
The programme originally selected is then displayed.
To  return to the previous menu, press the MENUbutton.
To  stop the search before it has finished, press theENTERbutton with Stopselected.
8When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign names to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)
Channels can be stored automatically by simply pressing the AUTO PROG.button on the remote control.
1Press the AUTO PROG.button while viewing a TV programme.
Result
: The Auto Storemenu is displayed with the Start selected.
2Press the ENTERbutton.
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 15
 
						

							You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Channel.
Result
:The options available in the Channelgroup are
displayed.
3Press the ENTERbutton.
4Press the or  buttonto select Manual Store.Press theENTERbutton.
Result
: The options available in the Manual Storemenu are
displayed with Programmeselected.
5Press the ENTERbutton again.
To  assign a programme number to a channel, find the correct
number by pressing the or  button and then press the
ENTERbutton.
Y ou can also set a programme number by pressing number
buttons on the remote control.
6Press the or  button to select Colour Systemand then press
the ENTERbutton. 
Select the colour standard required by pressing the or  button
repeatedly and then press the ENTERbutton.
Result
: The colour standards are displayed in the following order: AUTO - PAL - SECAM - NTSC 4.43
7Press the or  button to select Sound Systemand then press
the 
ENTERbutton.
Select the sound standard required by pressing the or  button
repeatedly and then press the 
ENTERbutton.
Result
: The sound standards are displayed in the following order: BG - DK - I - L
English-16
Storing Channels Manually
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 16
 
						

							8If you know the number of the channel to be stored,Press the or  button to select 
Channeland then press the ENTERbutton.
Select 
C(Air channel) or S(Cable channel) by pressing the 
or button.
Press the  button to select channel.
Select the required number by pressing the or  button and
then press the 
ENTERbutton.
If there is an abnormal sound or no sound, re-select the sound
system required.
Y ou can also set a 
channelby pressing number buttons on the
remote control.
9If you do not know the channel numbers, press the or  button
to select Searchand then press the ENTERbutton. Searchby pressingthe or  button and then press the
ENTERbutton.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
10Press the or  button to select Store.
Select OKby pressing theENTERbutton.
Result
: The channel and associated programme number are
stored.
11Repeat steps 8to 10for each channel to be stored.
Channel mode
P(Programme mode): When tuning is completed, the 
broadcasting stations in your area will have been assigned 
to position numbers from P00 to P99. You can select a 
channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by 
entering the assigned number to each broadcast station in 
this mode.
S (Cable channel mode): You can select a channel by 
entering the assigned number to each cable channel in this 
mode.
English-17
Storing Channels Manually 
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 17
 
						

							You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Channel.
Press the ENTERbutton.
Result:The options available in the Channelgroup are
displayed.
3Press the or  button to select Add/Delete.Press the ENTERbutton.
Result
:The state of the current channelis displayed.
4Press the / button to select channelthat you wish to addor delete.
Result
:If the channel that you wish to edit is not in memory, theAddis selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the 
Deleteis selected and displayed.
5Press the ENTERbutton to addor deletechannel.
6Press the MENUbutton to return to the previous menu or press
the EXITbutton to return to normal viewing.
7Repeat steps 4and 5for each channel to be added or deleted.
Y ou can also add or delete channel by simply pressing the ADD/DELbutton on remote control.
English-18
Editing the Channels
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 18