Singer Serger Professional 5 Manual
Have a look at the manual Singer Serger Professional 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Singer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3. Thread the top cover thread guide by pulling the thread towards the left until
it slips under the guide. Then pu ll the thread along the right side of the
button as illustrated.
4. While holding the thread, firmly pull the thread between the tension disks.
5. Turn the handwheel toward you unt il the lower looper extends 5-10mm
(approximately ½ inch ) from the needle plate edge.
6. Thread the looper area of the ma chine following the green color coded
thread guides 4-9.
Five-Thread Safety Stitch Wide page 7
7. Thread the hole in the Upper Looper from front to back k. Pull about 4
inches of thread through the loope r and place to the back of the
throat plate.
4. While holding the thread, firmly, pull the thread between the tension disks.
5. Turn the handwheel toward you unt il the lower looper extends 5-10mm
(approximately ½ inch ) from the needle plate edge.
6. Thread the looper area of the mach ine following the red color coded
thread guides 4-10.
7. Place the thread slighty from left and
to the ri ght of threading guide f.
8. Place the thread slightly from the
fr ont and to the back of threading
guide g.
9. Place the thread through h, i and j.
Five-Thread Safety Stitch Wide page 9
Five-Thread Safety Stitch Wide page 10
10. Thread the looper eye (A) from front to back. Pull about 4 inches of thread.
Position thread into V cutout (B) on thr eader. Firmly hold thread tail with left
hand and pull Threader lever (C) up into place (D).
NOTE: Make sure the Upper Looper thread is
behind the Lower Looper thread.
Threader Lever
“V” cutout
4. Turn the hand wheel toward you until the Chainstitch Looper extends out
10mm (approximately ½ inch) from the needle plate edge.
5. Thread the looper area of the ma chine following the brown color-coded
thread guides 4-11. Us e the tweezers provided in the accessory case to
aid in threading the looper.
6. Place the thread through threading guides f and g.
7. Continue threading guides h, i , j and k.
8. Thread the looper eye (A) from front to
back. Pull about 4 inches of thread
through the looper. Position the thread into
the V cutout (B) on the threader. Firmly
hol d the thread tail with left hand and pu ll
threader lever (C) up into place (D). Gently
pull 5-6” of thread to the back of the machine.
Five-Thread Safety Stitch Wide page 12
“V” cutout
Threader Lever
5. Continue to thread point s 4-8. Slip the thread into the foward slot of the
thread guide g. Go over the take up lever h. Continue by slipping the
thread into the left sl ot of the thread guides i and j .
6. Before threading the eye of the needl e, make sure the thread is behind
the thread guide located on the bottom of the needle clamp.
7. Thread the eye of the Left Overedge Needle k.
8. Draw about 4 inches of the thr ead through the needle eye towards the back
of the machine.
9. Place the thread to the back, under the Presser F oot. Lower foot and sew.
Five-Thread Safety Stitch Wide page 14