Tone Commander 30e120 Installation Instructions

120 (#1) Configuration Sheet, DSS Keys 1-60
DSS keys are numbered vertically on the console.
DSS
KEYDSS / AUTODIAL
NUMBER
(24 digits max.)
USER NAME
(14 characters max.)DSS
KEYDSS / AUTODIAL
NUMBER
(24 digits max.)
USER NAME
(14 characters max.)
1FD4710 John F31FD4740 Susan R
2FD4719 Bill Jones32FD4742 Rick T
3FD4729 Jill K33FD4743 Linda P
4FD4711 Jane W34FD4741 Ralf C
5FD4712 Ronnie Y35FD4744 Greg O
6FD4715 Kim L36FD4747 Sally T
7FD4720 Jack S37FD4745 Bob W
8FD4716 William F38FD4746 Clint E
9FD4717...

Installation
Contents of Shipping Boxes
The Tone Commander 30e120 system is shipped in four boxes: one for each console, and one for each
Central Processing Unit (CPU). Please compare the contents of these boxes with the lists below. Contact
your distributor if any items are missing or damaged.
30e Console Box:
(1) 30e console (1) Attendant’s Guide
(2) 7´ line cords (1) Quick Reference Card
(1) handset with cord (31) clear keycaps
(1) handset cradle (4) sheets of keycap labels
(2) cradle mounting screws...

CPU Installation
Refer to Figures 1 and 2.
Mounting CPUs
Refer to Figure 5.
1. Fasten a plywood sheet to the wall with hardware suitable for the wall material. The sheet should have
enough room for all 30e and 120 CPUs, and any required ancillary equipment such as expansion
console and night bell power supplies.
2. Using the supplied mounting template, mark and pre-drill the mounting holes for the 30e CPU.
Make sure that the CPU mounting location is within 5 feet of a standard 117 VAC, 60 Hz grounded...

PSE-3
1. Label one side of a terminal block as shown in the Connector Designation column of Table 7.
2. Mount the block to the plywood sheet near the other system blocks, using suitable fasteners.
Cabling to Blocks
1. Punch down the cables to the blocks as shown in the Wire Color columns of Tables 1-7.
2. Plug the 25 pair cables into the appropriate CPU or power supply connectors. Route the cables through
the slots at the bottom of the housings.
3. Secure the cables with the supplied connector clamps....

13-102499 Rev. GPage 15
Tone Commander 30e120 Installation Instructions
Figure 1– 30e Typical Installation 

Page 1613-102499 Rev. G
Tone Commander 30e120 Installation Instructions
Figure 2– 120 Typical Installation 

CONNECTOR #1 CONNECTOR #2
PIN NO.
WIRE COLORDESIGNATION(left)DESIGNATION(right)
26·······WHT-BLU·······1T···········21T
1·······BLU-WHT·······1R···········21R
27·······WHT-ORN·······2T···········22T
2·······ORN-WHT·······2R···········22R
28·······WHT-GRN`······3T···········23T
3·······GRN-WHT·······3R···········23R
29·······WHT-BRN·······4T···········24T
4·······BRN-WHT·······4R···········24R
30·······WHT-SLT·······5T···········25T
5·······SLT-WHT·······5R···········25R...

CONNECTOR #3
PIN NO.
WIRE COLOR(left side of block unused)DESIGNATION(right)
26·······WHT-BLU······· – ··········1TN
1·······BLU-WHT······· – ··········1RN
27·······WHT-ORN······· – ··········1C1
2·······ORN-WHT······· – ··········1C2
28·······WHT-GRN······· – ··········1C3
3·······GRN-WHT······· – ··········1C4
29·······WHT-BRN······· – ··········2TN
4·······BRN-WHT······· – ··········2RN
30·······WHT-SLT······· – ··········2C1
5·······SLT-WHT······· – ··········2C2
31·······RED-BLU······· –...

CONNECTOR #1 CONNECTOR #2
PIN NO.
WIRE COLORDESIGNATION(left)DESIGNATION(right)
26·······WHT-BLU·······T1···········T16
1·······BLU-WHT·······R1···········R16
27·······WHT-ORN·······T2···········T17
2·······ORN-WHT·······R2···········R17
28·······WHT-GRN·······T3···········T18
3·······GRN-WHT·······R3···········R18
29·······WHT-BRN·······T4···········T19
4·······BRN-WHT·······R4···········R19
30·······WHT-SLT·······T5···········T20
5·······SLT-WHT·······R5···········R20...

CONNECTOR #3 CONNECTOR #4
PIN NO.
WIRE COLORDESIGNATION(left)DESIGNATION(right)
26·······WHT-BLU·······T31 ··········T46
1·······BLU-WHT·······R31 ··········R46
27·······WHT-ORN·······T32 ··········T47
2·······ORN-WHT·······R32 ··········R47
28·······WHT-GRN·······T33 ··········T48
3·······GRN-WHT·······R33 ··········R48
29·······WHT-BRN·······T34 ··········T49
4·······BRN-WHT·······R34 ··········R49
30·······WHT-SLT·······T35 ··········T50
5·······SLT-WHT·······R35 ··········R50...