Toshiba B852 User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-48 
2.10.4.  Uninstalling the Printer Driver 
 
 
 
 
 
  
(1)  Select “Settings” – “Printers” from the “Start” menu to open the printer folder. 
(2)  Right-click on the printer driver icon to be deleted, then select “Delete”.  The confirmation message is 
displayed. 
(3)  Click on the [Yes] button to delete.   
(4)  After the printer driver icon is deleted, restart your host computer. 
 
  
(1)  Log on to your host...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-49 
2.10.5  Adding/Deleting a LAN Port 
To use the LAN interface, first, you have to make the following settings in “ IP ADDRESS” in the system 
mode of the printer. (Refer to TOSHIBA TEC support representative.) 
•  Set the printer IP address (“PRINTER IP ADRES”), the gateway IP address (“GATEWAY IP 
ADRES”), and subnet mask (“SUBNET MASK”). 
•  Set the port number (“SOCKET PORT”). 
 
Among these settings, the printer...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-50 
 
(1)  Right-click on the printer icon.  Select “Properties” to open the printer “Properties” dialog box. 
(2)  Select the “Ports” tab, and click on the [Add Port…] button.  The “Printer Ports” dialog box is 
displayed. 
(3)  Select “Seagull Scientific TCP/IP Port” from the “Available Printer Ports” list, then click on the [OK] 
button. 
(4)  On the “Add Seagull TCP/IP Port” dialog box, enter the name or IP address,...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-51 
2.10.6 Cautions 
(1)  Printer Driver Upgrades 
•  To upgrade the printer driver to this version, uninstall the previous version of the printer driver, before 
installing this printer driver. 
•  Be sure to restart your host computer, after you upgrade the printer driver. 
•  When your operating system is Windows 98, or Windows Me, be sure to restart your host computer, 
after you uninstall the previous version of the...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-52 
2.10.7  Using the Printer Driver  
For how to use the Printer Driver, please refer to the Help for Windows Printer Drivers screen. 
 
1)  Open the Properties screen of the Printer Driver.  
2)  Clicking on the About tab causes the following screen to appear. 
  Click on the [Help] button. 
 
3)  The Help for Windows Printer Drivers screen appears.  This screen will provide how to use the printer 
driver.  
 
About...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.11 Print Test
 
E2-53 
2.11 Print Test 
 
 
 
 
 
 
 
  After your operating environment has been set, perform a print test. 
 
1.
  Perform a print test by using the Printer Driver or an Issue Command. 
 
  The printer driver’s Properties screen allows you to set the  communication conditions, media size, and other printing conditions 
in accordance with your operating environment.  For details, refer to 
the  Help for the  Windows Printer Drivers  screen....

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.11 Print Test
 
E2-54 
2.11  Print Test (Cont.) 
 
   
 
It is necessary to set the issue mode
, cut position, etc. for the Printer 
Driver or TPCL (TEC Printer Command Language) in accordance with 
your printing condition.   
For details of the TPCL, refer to the  B-852 Series External Equipment 
Interface Specification  stored in the CD-ROM.  
Regarding how to use the Printer Driver, refer to the  Help for the 
Windows Printer Drivers  screen.  
 
To gain...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.12 Position and Print Tone Fine Adjustment
 
E2-55 
2.12  Position and Print  Tone Fine 
Adjustment 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   This section describes how to fine adju
st a print start position, cut/strip 
position, reverse feed amount, print tone, and ribbon motor torque. 
When a fine adjustment is required, such as print start position, print tone, 
etc, follow the procedure below.  
 
1.   Turn on the printer and confirm that...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.12 Position and Print Tone Fine Adjustment
 
E2-56 
2.12  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the  [PAUSE] key.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Print Start Position Fine Adjustment
[RESTART]
[FEED]
FEED ADJ.+50.0mm 
FEED ADJ.+49.9mm 
FEED ADJ.+0.0mm 
FEED ADJ.-49.9mm 
FEED ADJ.-50.0mm 
FEED ADJ.+0.1mm...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.12 Position and Print Tone Fine Adjustment
 
E2-57 
2.12  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the  [PAUSE] key.  
 
 
 
 
 
 
 
 
Cut Position Fine Adjustment 
CUT ADJ. +10.0mm  
[RESTART]
[FEED]
CUT ADJ.+50.0mm 
CUT ADJ.+49.9mm 
CUT ADJ.+0.0mm 
CUT ADJ.-49.9mm 
CUT ADJ.-50.0mm 
CUT ADJ.+0.1mm 
CUT ADJ.-0.1mm 
NOTES: 
Choose...