Toshiba B852 User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-28 
2.9.2  Dump Mode Setting  (Cont.) 
 
 The data in the receive buffer is printed as follows: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Receive Buffer Size
 
Interface Buffer size 
RS-232C  1MB (65536 lines) 
Centronics  1MB (65536 lines) 
Network Interface  1MB (65536 lines) 
BASIC 1  8KB (512 lines) 
BASIC 2  8KB (512 lines) 
USB  1MB (65536 lines) 
 
Required Label Length
 
Interface Media length* 
RS-232C...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-29 
2.9.3 BASIC Expansion  Mode 
 While “EXPAND MDOE” is displaye d on the LCD Message Display, 
press the  [PAUSE]  key to enter the BASIC Expansion Mode. 
In the BASIC Expansion Mode, it is possible to execute the BASIC 
expansion mode program unde r the following conditions.  
 
• The BASIC expansion mode program has already been loaded. 
• The BASIC enable setting mode is selected. 
 
The basic expansion mode ends...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-30 
2.9.4 Automatic Calibration 
 
 
 While “AUTO CALIB” is displayed on the LCD Message Display, 
press the  [PAUSE]  key to enter the Automatic Calibration Mode. 
In the Automatic Calibration Mode,  whether to activate the automatic 
calibration at a power on time or not is selectable.  When the automatic 
calibration is activated, the printer feeds the media for about 160 mm 
each time the power is turned on or  the...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-31 
2.9.5 LAN Setting While “LAN” is displayed on  the LCD Message Display, press the 
[PAUSE]  key to enter the LAN Setting Mode. 
In the LAN Setting Mode, whether to enable the LAN communication 
and SNMP or not is selectable.    
 
When “LAN” appears, press the  [PAUSE] key. 
 
 
 
Use the  [FEED]  or [RESTART]  key to select a desired option. 
 
 
 
 
 
 
 
 
After selecting the LAN setting, press the  [PAUSE] key....

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-32 
2.9.6  Real Time Clock Setting 
 
 While “RTC SET” is displayed  on the LCD Message Display, press 
the  [PAUSE]  key to enter the Real Time Clock Setting Mode. 
 
The Real Time Clock Setting Mode contains the following sub menus.  
Each time the  [PAUSE] key is pressed, the sub menus are displayed 
sequentially. 
 
  (1)  Date setting (Year, Month, Day) 
  (2)  Time setting (Hour, Minute, Second) 
  (3)  Low...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.9 Setting an Operating Environment
 
E2-33 
2.9.6  Real Time Clock Setting  (Cont.) 
 
 
 
 (3)  Low Battery Check Setting 
This parameter is to choose whethe r to activate the low battery check 
function or not.  
 
 
Press the [PAUSE] key to set.  
 
 
 
 
 
 
 
After selecting the low battery check, press the  [PAUSE] key. 
 
(4)  RTC Data Renewal Timing Setting 
This parameter is to choose the RTC data renewal timing.  
 
 
Press the [PAUSE] key to set....

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-34 
2.10  Installing the Printer Drivers 
2.10.1. Introduction 
This manual describes how to install the TOSHIBA printer driver for the TOSHIBA bar code printer on your 
Windows host computer; install and delete the printer driver, the procedure for adding the LAN port, cautions 
and limitations.   
The examples provided here illustrate the procedure for installing the printer driver version V7.0 for the B-SA4T 
series....

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-35 
2.10.3.  Installing the Printer Driver 
The installation procedure differs depending on the interface connected to the printer and the operation system 
you are using.  Please install the printer driver by performing the appropriate procedure. 
If the previous version of the printer driver has been installed on your host computer , be sure to uninstall it 
before you install this printer driver.  (Refer to Section...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-36 
 
(1) 
Select “Settings” – “Printers” from the “Start” menu to open the printer folder. 
(2)  Double-click on the “Add Printer” icon.  The Add Printer Wizard runs.  Click on the [Next] button. 
(3)  Select “Local printer”, then click on the [Next] button.  The screen listing “Manufacturers and 
Printers” is displayed. 
(4)  Click on the [Have Disk…] button.  The “Install From Disk” dialog box is displayed. 
Specify...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 
2.10 Installing the Printer Drivers
 
E2-37 
(6)  The screen to select the existing installed printer driver or use the new one, is displayed.  Select 
“Replace existing driver”, then click on the [Next] button.  If you install the printer driver for the first 
time, this screen is not displayed. 
(7)  Select the port to be used for printing from the “Available ports” list, then click on the [Next] button. 
(8)  Change the printer name if necessary, and select...