Toshiba Bev4t User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33087 2.10 How to Use an SD Card
 
E2-20 
2.10 How to Use an SD  Card 
 
 
 
 
 This printer enables you to save prin t formats, writable characters, True 
Type fonts, etc. in commercially available SD cards. 
For available SD card types, please ask the nearest TOSHIBA TEC 
representative.  
For how to save data in an SD  card, please refer to the External 
Equipment Interface Specification stored in the CD-ROM.  
 
 
„  Inserting an SD Card 
 
1.   Turn off the...

3. MAINTENANCE ENGLISH VERSION EO1-33087 3.1 Cleaning
 
E3- 1 
3. MAINTENANCE 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.1 Cleaning 
 
 
3.1.1 Print Head 
 
 
 
 
 
 
 
 
 
 
 
 
This chapter describes how to pe rform routine maintenance.   
To ensure the continuous high quality operation of your printer, you 
should perform a regular maintenance routine.  For high throughput it 
should be done on a daily basis.  Fo r low throughput it should be done on 
a weekly basis....

3. MAINTENANCE ENGLISH VERSION EO1-33087 3.1 Cleaning
 
E3- 2 
3.1.2 Platen/Sensors  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.1.3 Cover 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.1.4 Media Housing 
  1.
 Wipe the Platen with a soft cl oth moistened with absolute ethyl 
alcohol.  
2.  Remove dust or paper particles from wipe the Black Mark Sensor, 
Feed Gap Sensor, and Cover Open Sensor with a dry soft cloth. 
 
 
 
 
 
Wipe the Cover with a dry soft cloth.  Wipe off dirt with a soft cloth 
slightly moistened with mild...

3. MAINTENANCE ENGLISH VERSION EO1-33087 
3.2 Care/Handling of the Media and Ribbon
 
E3- 3 
3.1.5  Strip Sensor/Strip Roller  (Option) 
 
 
 
 
 
 
 
 
 
 
 
 
3.2  Care/Handling of the Media and Ribbon  
 
 
 
 
1.  Wipe the Strip Roller with a soft cloth moistened with absolute  
 ethyl alcohol. 
2.   Remove dust or paper particles from  the Strip Sensor with a dry soft 
cloth.  
 
 
 
 
 
•   Do not store media or ribbons for longer than the manufacturer’s 
recommended shelf life  
•   Store media...

4. TROUBLESHOOTING ENGLISH VERSION EO1-33087 4.1 Troubleshooting Guide 
E4- 1 
4. TROUBLESHOOTING 
 
 
 
 
 
 
 
4.1 Troubleshooting Guide 
 
Symptom Cause Solutions 
The power cord is not connected 
to the Power Adapter.    Disconnect the power cord from the AC 
outlet, connect the power
 cord to the Power 
Adapter, then connect it to the AC outlet.   
（ ⇒  Section 2.5 ） 
There is a power failure or the 
power is not being supplied to 
the AC outlet.   Test the AC outlet with a power cord from 
another...

4. TROUBLESHOOTING ENGLISH VERSION EO1-33087 4.2 Status Lamp 
E4- 2 
 
Symptom Cause Solutions 
The print head is dirty.  Clean the print head.  
（⇒  Section 3.1.1 ） Missing dots 
The print head elements are 
partly broken.   When the missing dots affect printouts, turn 
off the printer and contact the nearest 
TOSHIBA TEC representative to ask for 
replacement of the print head.   
TOSHIBA TEC approved media 
is not used.  Replace the media with TOSHIBA TEC 
approved one.   Labels are not separated...

4. TROUBLESHOOTING ENGLISH VERSION EO1-33087 4.3 Removing Jammed Media 
E4- 3 
Flashing speed of the LED  Status  Flashing interval 
Flashing slowly  1 sec. 
Flashing at medium speed  0.5 sec. 
Flashing fast  0.2 sec. 
 
 
 
4.3  Removing Jammed Media 
This section describes in detail how to remove jammed media from the printer.  
  
 
 
 
1.   Turn the power off. 
2.   Open the Top Cover and remove the media roll. 
3.   Open the Ribbon Access Cover and remove the ribbon. 
4.   Remove the jammed media...

APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33087 A1.1 Printer
 
EA1- 1 
APPENDIX 1  SPECIFICATIONS 
Appendix 1 describes the printer specifications a nd supplies for use on the B-EV4T printer.  
 
A1.1 Printer 
The following are the printer specifications.    
Item B-EV4T-GS14-QM-R 
AC100 to 240V, 50/60 Hz 
 
100 to 120V: 2.94A, 70.6W maximum, 200 to 240V: 2.97A, 71.3W maximum 
100 to 120V: 0.94A, 2.25W maximum, 200 to 240V: 0.94A, 2.25W maximum Supply voltage 
Power consumption 
     During a print...

APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33087 A1.2 Options
 
EA1- 2 
Item B-EV4T-TS14-QM-R 
AC100 to 240V, 50/60 Hz 
 
100 to 120V: 2.3A, 55.2W maximum, 200 to 240V: 2.29A, 55.0W maximum  
100 to 120V: 0.94A, 2.24W maximum, 200 to 240V: 0.93A, 2.23W maximum Supply voltage 
Power consumption 
     During a print job 
     During standby 
Power supply 
Operating temperature range 
Storage temperature range 
Relative humidity 
Humidity for storage 
Ventilation for storage 
Resolution 
Printing method...

APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33087 A1.2 Options
 
EA1- 3 
A1.2 Options 
  Option Name  Type  Description 
AC Adapter Cover  B-EV904-AC-QM-R  Attached  to the printer bottom for housing the AC 
adapter. 
Cutter module   B-EV204-F-QM-R  B-EV204-P-QM-R  A cutter unit that makes full cuts. 
A cutter unit that makes partial cuts.
 
Strip module  B-EV904-H-QM-R  When attached to the front of the Media Outlet, 
this module allows the on-demand strip issue by 
detecting the presence or lack of...